Processing

Search By Category

Search By Manufacturer

Search By Country

Building Filters

16782

Used dry

  • Trusted Seller
    10 CU. FT. PATTERSON KELLEY

    10 CU. FT. PATTERSON KELLEY TWIN SHELL DRY BLENDER - S/S

    • Manufacturer: Patterson-Kelley

    1 - used Patterson Kelley 10 cu. ft. V-Blender - 304 stainless stee - Dry Blender - Rated maximum material density 135 lbs./cu. ft. - (2) 18" top charge ports - 8" bottom discharge with a butterfly valve. - Inte...

    USA
  • Trusted Seller
    Patterson-Kelley Co. Twin shell dry

    Patterson-Kelley Co. Twin shell dry blender 4qt capacity w/ 1/4HP Motor 1Ph 60Hz Process Engineering Equipment

    • Manufacturer: Patterson-Kelley

    “In good working condition - see photos” Patterson-Kelley Co. Twin shell dry blender 4qt capacity w/ 1/4HP Motor 1Ph 60Hz 115/230V Max Material Density 500lb/cu.ft.

    $1,650 USD
    Chico, TX
  • TubexMachinery Garboli LPC 300 WET

    TubexMachinery Garboli LPC 300 WET Orbital Tube Polishing Machine – Wet & Dry Finishing for Tubes up to Ø114mm

    • Manufacturer: TubexMachinery

    D = 5-114 mm R1 min. 150 mm S = 940 mm Disc = 1,5 kw (4.5" max) R2 = 1,5 x Ø mm L = 60 mm Belts = 3.0 kw Garboli LPC 300 WET Orbital Tube Polishing Machine The Garboli...

    Pointe-Claire, Canada
  • Trusted Seller
    1 CU. FT. PATTERSON KELLEY

    1 CU. FT. PATTERSON KELLEY TWIN SHELL DRY BLENDER – S/S (#9454)

    • Manufacturer: Patterson-Kelley

    1 – used 1 cu.ft. Patterson Kelley Twin Shell Dry Blender. Stainless steel construction. Rated 500 lbs/cuf. ft. max. material density. Driven by a 3/4 HP 3/60/230-460V, TEFC Gearmotor. With covers and stands. Off...

    USA
  • Trusted Seller
    59 x 59 in (1500mm)

    59 x 59 in (1500mm) Dry Vac Membrane Filter Press

      - 3500 sq. ft. (325 sq. Meter) filtration area - 295 cubic foot cake capacity - 143 4-eye, 1500mm x 1500mm polypropylene plates - Plate shifter - Control panel - Hydraulic drive - Water manifold

      USA
    • Trusted Seller
      2006 Motan LCA-15

      2006 Motan LCA-15

      • Manufacturer: Motan

      Throat Mount Membrane Dryer Used Motan LCA-15 Drying and Heating for sale. This pre-owned machine is available all over the US

      Sterling, MA
    • Trusted Seller
      2013 Superfici "Lame D'Aria 6000"

      2013 Superfici "Lame D'Aria 6000" Dry Tunnel

      • Manufacturer: Superfici
      • Phase type: Three-phase

      Superfici "Lame D'Aria 6000" Dry Tunnel 58" belt Exhaust fan Control panel Ducting NOT included

      Salt Lake City, UT
    • Trusted Seller
      2006 Motan LCA-15

      2006 Motan LCA-15

      • Manufacturer: Motan

      Throat Mount Membrane Dryer Used Motan LCA-15 Drying and Heating for sale. This pre-owned machine is available all over the US

      Sterling, MA
    • Trusted Seller
      Pad Print PP-1860-W

      Pad Print PP-1860-W

      • Manufacturer: Pad Print

      700* Heating Elements Used Pad Print Machinery PP-1860-W Drying and Heating for sale. This pre-owned machine is available all over the US

      Sterling, MA
    • Trusted Seller
      28" WIDE MARK ANDY VERSAMAX

      28" WIDE MARK ANDY VERSAMAX 10 COLOR FLEXO PRESS MFG 2016 - UV & GAS DRYING

      • Manufacturer: Mark Andy

      Used 28" Wide Mark Andy VersaMax Flexo Press Equipped with both UV and hot air dryer on all print units Mark Andy VersaMax flexo press Model Year 2016 – started up in 2017 Material capability specifications, ....

      United States
    • Tiger Depack HS-90 Depackager

      Tiger Depack HS-90 Depackager

      • Manufacturer: Tiger Depack

      The largest Tiger Depackager, the HS-90, is the secret ingredient that helps you turn food waste into profit by separating organic waste from inorganic packaging. The Tiger HS-90 can feed, separate, process, and ...

      Avon, OH
    • Tiger Depack HS-55 Depackager

      Tiger Depack HS-55 Depackager

      • Manufacturer: Tiger Depack

      The Tiger HS-55 Depackager separates organic food waste from inorganic packaging and produces up to 99.6% contamination-free organics! The Tiger HS-55 can process bulk commercial food waste or pre-or post-consume...

      Avon, OH
    • Tiger Depack HS-30 Depackager

      Tiger Depack HS-30 Depackager

      • Manufacturer: Tiger Depack

      The Tiger HS-30 Depackager helps you recover food waste costs by separating organic waste from inorganic packaging and turning food waste into cash flow. In a small, stationary footprint, the Tiger HS-30 can feed...

      Avon, OH
    • Trusted Seller
      DONALDSON DMC-MMB, 21490 DRY FLO

      DONALDSON DMC-MMB, 21490 DRY FLO MIST COLLECTOR M6977

      • Manufacturer: Donaldson / Torit / DCE
      • Phase type: Three-phase

      Unit checked out ok Weight: 270 LBS | Shipping: Calculated at Checkout | Model part number: DMC-MMB, 21490 | Voltage: 480 VAC | Phase: 3 Phase

      $1,500 USD
      El Paso, TX
    • 2015 Matsui MJ3-300

      2015 Matsui MJ3-300

      • Manufacturer: Matsui

      Voltage: 460/3/60 | – drying hopper: 660 lbs. | – hopper volume: 17.6 cubic feet | – temperature range: 176 – 300°F | – drying blower: 1.5 KW

      Valley City, OH
    2324252627

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.