Processing

Building Filters

107

Used ika

  • Trusted Seller
    IKA Works MK 2000/50

    IKA Works MK 2000/50

    • Manufacturer: IKA
    • Model: MK 200050

    Unused 150HP IKA Works Colloid Mill Model MK 2000/50. Stainless Steel. Rotor speed 1265 RPM. Max throughput 80000L/hr. 150HP 460V/60Hz TEFC Motor. 8" Inlet, 6" outlet. Flowserve 6L mechanical seal reservoir. CS ...

    Red Bank, NJ
  • Trusted Seller
    IKA Works DR 2000/10

    IKA Works DR 2000/10

    • Manufacturer: IKA

    Used 20 HP IKA Works Dispax Reactor / 3 Stage High Shear Inline Dispersing Mill. Type DR-2000/10. Model P010082. Maximum flow rate 35 gpm (8,000 liter). Tip speed approximately 23 m/s (4500 fpm). Maximum process ...

    Red Bank, NJ
  • Trusted Seller
    IKA Works DR-PB 2000/20

    IKA Works DR-PB 2000/20

    • Manufacturer: IKA

    Used 50HP IKA Works Inline Dispax Reactor Mixing/Homogenizing/Dispersing. Model DR-PB 2000/20. Nominal flow rate 30 gallons per minute, solids capacity 6200 pounds an hour. Driven by a 50hp, 3/60/460 volt, 3535 r...

    Red Bank, NJ
  • Trusted Seller
    Ika Works Dispax Reactor Trial

    Ika Works Dispax Reactor Trial #17405

    • Manufacturer: IKA

    In line high shear mixer by ika works. This mixer features a single stage intermeshing high speed rotar and fixed stator of identical designs with three rows of intermeshing teeth, jacketed mill body with inlet a...

    Marlboro, NJ
  • Trusted Seller
    New 2000 Liter IKA Jacketed

    New 2000 Liter IKA Jacketed Triple Motion Tank

    • Manufacturer: IKA

    This IKA Jacketed Triple Motion Tank, used and ready for re-imagined operations, offers a substantial 2000-liter capacity to accommodate a wide variety of mixing and processing needs. Its jacketed design enables ...

    Piscataway, NJ
  • IKA-WERKE AD25

    IKA-WERKE AD25

    • Manufacturer: IKA

    IKA-WERKE AD25 Stand This product serves as a mounting support designed for the IKA DK 25.11 Disperser

    $800 USD
    Midwest, USA
  • IKA-WERKE DZM-M

    IKA-WERKE DZM-M

    • Manufacturer: IKA

    IKA-WERKE DZM-M Speed Monitor With Sensor & Power Supply This product is designed to work with a sensor and power supply to display and measure rotation speeds of connected devices.

    $850 USD
    Midwest, USA
  • Trusted Seller
    Ika Works Tank Mounted Homo

    Ika Works Tank Mounted Homo Utc80/kd #16814

    • Manufacturer: IKA

    Tank mounted homogenizer by ika works, inc., model utc 80/kd, serial # 2926-14, part # po17951. Features pharmaceutical grade closed tank in 316l stianless steel, angular mounted homogenizer is direct driven by s...

    Marlboro, NJ
  • Trusted Seller
    Stainless Steel 316 IKA-Werk W32KAAABAA6660

    Stainless Steel 316 IKA-Werk W32KAAABAA6660 Colloid Mill - IPP# 208150

    • Manufacturer: IKA

    Series 2000 Type: DRS2000/5 Type 139 All piping and support equipment stainless steel. Mill and motor mounted on stainless steel base with cooler and micro motion feed control. Micro motion complete with transmit...

    Princeton Junction, NJ
  • Trusted Seller
    IKA Turrax 1300 L

    IKA Turrax 1300 L

    • Manufacturer: IKA

    Used mixing station for liquids. Station consist of vertical stainless steel mixing tank with total volume 1300 l. Internal diameter 1170 mm x length of straight side of wall 1140 mm. Bottom elipsoidal, with cent...

    Hainesport, NJ
  • Trusted Seller
    IKA DRS 2000/05

    IKA DRS 2000/05

    • Manufacturer: IKA

    High-shear industrial mixer for continuous processes The DISPAX-REACTOR® is a new high-speed mixing, dispersion and homogenization unit, designed for continuous processes in the chemical, pharmaceutical, cosmetic...

    Hainesport, NJ
  • IKA Works High Shear Mixer

    IKA Works High Shear Mixer / Homogenizer – Stainless Steel, 20 HP

    • Manufacturer: IKA

    54163003 Used IKA Works Mixer/Homogenizer. Approximately 7-1/2" diameter x 6" deep chamber, top bolt on cover with 2" diameter tri-clamp opening, 2" side bottom outlet. Driven by a 20hp 3/60/575V, 3537 rpm motor....

    Belvidere, IL
  • Trusted Seller
    IKA Dispax Reactor, Inline Disperser

    IKA Dispax Reactor, Inline Disperser

    • Manufacturer: IKA
    • Model: DR3

    IKA Disperser/Mill High shear inline dispersing machine Dispax- reactor type DR3-9/CIP 25 HP

    Braintree, MA
  • 50 h.p. IKA Werks High

    50 h.p. IKA Werks High Shear Mixer

      One used 50 h.p. IKA Werks High Shear Mixer, variable speed, 3.5" and 2.5" inlet/outlet connections, on Casters. 50 h.p. IKA Werks High Shear Mixer

      Cleveland, OH
    • IKA Works Inline Dispax Reactor

      IKA Works Inline Dispax Reactor – Model MHD/DR-PB 20, 50 HP Homogenizer

      • Manufacturer: IKA

      50388105 Used IKA Works Inline Dispax Reactor. Mixing/Homogenizing/Dispersing, Model MHD/DR-PB 20. Nominal flow rate 30 gallons per minute, solids capacity 6200 pounds an hour. Driven by a 50 hp, 3/60/460 volt, 3...

      Belvidere, IL
    • no-image_en.png

      IKA T18 Agitators, Blenders, Mixer

      • Manufacturer: IKA
      • Model: T18

      Good condition IKA T18 Agitators, Blenders, Mixers. Located in Germany and other countries. Click request price for more information.

      Germany
    23456

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.