Processing » Washington

Search By Category

Search By Manufacturer

Building Filters

783

Used Processing in Washington, USA

  • Trusted Seller
    Pregis AirSpeed 5000 - Packaging

    Pregis AirSpeed 5000 - Packaging Station Cushion Inflator

    • Manufacturer: Pregis

    Pregis AirSpeed 5000. Manufactured in 2003. Produce inflatable on-demand void fill, cushioning, and containment packaging for shipping. Chains of pillows are created using ambient air, eliminating the need for an...

    $1,500 USD
    Battle Ground, WA
  • 2002 Westlund Engineering Inc. 200

    2002 Westlund Engineering Inc. 200

    • Manufacturer: Westlund Engineering Inc.

    Pneumatic Placer - 60 cycles per minute, but 40 cycles per minute is more realistic. Pneumatic Placer – Starts with a bang and stops with a bang. The air cylinder that drives a pneumatic placer builds up pressur...

    $1,650 USD
    Fife, WA
  • Trusted Seller
    VINCENT MODEL EF-30 SLUDGE PRESS

    VINCENT MODEL EF-30 SLUDGE PRESS S/S SN 17590-8 MANUFACTURED 2019

    • Manufacturer: VINCENT

    One (1) Used Vincent Mdl. EF-30 Sludge Press All S/S SN 17590-8 MFG 2019 EF-30 Sludge Press HP: 30 CAPACITY GPM: 300-1500 STAINLESS STEEL UNIT MANUFACTURED 2019 Presently installed in operation. Available due to ...

    Dayton, WA
  • Trusted Seller
    Auction
    Dayton Mobile Heater

    Dayton Mobile Heater

    • Manufacturer: Dayton

    Dayton Mobile Heater in repairable condition. Parts missing (not exactly sure everything needed to get it up and running). Inspection recommended.

    Richland, WA
    Visit Auction Website
  • Trusted Seller
    HOWDEN SERIES TWIN-CA 56 STEAM

    HOWDEN SERIES TWIN-CA 56 STEAM TURBINE AND TD POWER SYSTEMS AC GENERATOR 7.0MW MFG 2018 - PENDING RF

    • Manufacturer: Howden
    • Model: TWIN-CA 56

    Howden 7MW TWIN Condensing Steam Turbine with A.C. Generator MFG 2018 50 HZ / 60 HZ • OEM: Siemens Turbomachinery Equipment / TD Power systems Series SST-110 • Unit type: Twin-CA 56 • Power output: 7.0MW • Main S...

    Washington, USA
  • Trusted Seller
    ROYAL A-20-F

    ROYAL A-20-F

    • Manufacturer: Royal

    ROYAL A-20-F CRUCIBLE HAULER ROYAL A-20-F Crucible Hauler, 30,000 lbs Capacity, 19160 Hours

    Malaga, WA
  • Trusted Seller
    2015 ROYAL A-20 HAUL MASTER

    2015 ROYAL A-20 HAUL MASTER

    • Manufacturer: Royal

    Royal A-20 Haul Master Crucible Hauler 2015 Royal A-20 Haul Master Crucible Hauler, 30,000 lb Capacity, Cummins 6-Cylinder Diesel Engine EQUIPPED WITH: Cummins 6-Cylinder Diesel Engine

    Malaga, WA
  • Alkota CSF-20 Media Filtration System

    Alkota CSF-20 Media Filtration System Water Treatment Reclamation

    • Manufacturer: Alkota

    “Used, operational. Buyer Responsible for removal and loading expenses.” Alkota CSF-20 Media Filtration System Sold in place. Used, operational. Buyer Responsible for removal and loading expenses. Gas fired press...

    $2,250 USD
    Ferndale, WA
  • Trusted Seller
    2007 Coperion Extruder, Model# ZSK-26

    2007 Coperion Extruder, Model# ZSK-26

    • Manufacturer: Coperion Waeschle

    Coperion Extruder with Refrigeration Unit and Spare Set of Augers, Model# ZSK-26, Serial# 919603

    $100,000 USD
    Bellingham, WA
  • Trusted Seller
    Trinco 24 BP Blast Cabinet

    Trinco 24 BP Blast Cabinet

    • Manufacturer: Trinco
    • Model: 24 BP

    Equipment Features: - 14 Gauge welded steel construction - Carbon screen work floor - Heavyweight rubber gloves - Trinco easy change window frame - Trinco safety enclosed floor valve blasting control - Trinco tu...

    Washington, USA
  • Trusted Seller
    Trinco 36 BP Blast Cabinet

    Trinco 36 BP Blast Cabinet

    • Manufacturer: Trinco
    • Model: 36 BP

    Equipment Features: Designed for intermittent blasting operations. The Trinco BP Dust Collector vacuums the dust and contamination from the cabinet. Media is recycled from the gun system to the hopper and back t...

    Washington, USA
  • Trusted Seller
    127" (3.20M) VALLEY S/S PRESSURIZED

    127" (3.20M) VALLEY S/S PRESSURIZED HEADBOX

    • Manufacturer: Valley

    104014 One (1) used Valley 127" (3.2m) slice model AHE-22 Multiplex, airpad, three pass stainless steel pressurized headbox. This headbox was last producing fine paper ranging from 15 lb/1300 sq.ft. up to 70 lb/1...

    Washington, USA
  • Trusted Seller
    60" DIA. X 184" FACE

    60" DIA. X 184" FACE (1524MM X 4.68M) BELOIT DRYER SECTION 160 PSI (24)

    • Manufacturer: Beloit

    107692 One (1) used Beloit dryer can section consisting of (25) 60" diameter x 184" face width dryers rated for 160 PSI.

    Washington, USA
  • Trusted Seller
    CELLECO MODEL 350 CLEANPAC 5"

    CELLECO MODEL 350 CLEANPAC 5" DIA. BANK OF 8 TERTIARY

    • Manufacturer: CELLECO

    107690 One(91) used Bank of 8 Celleco Model 350 Cleanpac low consistency cleaners, 5 " dia. x 30" long, Material Plastic, Tertiary

    Washington, USA
  • Trusted Seller
    CELLECO MODEL 350 CLEANPAC 4"

    CELLECO MODEL 350 CLEANPAC 4" DIA. BANK OF 96 PRIMARY

    • Manufacturer: CELLECO

    107689 350 One (1) used Bank of (96) Celleco, Model 350 CleanPac low consistency cleaners, Material Plastic, 81 Cleaners are 4" D x 26" L, 15 Cleaners are 5" D x 30" L Primary

    Washington, USA
  • no-image_en.png

    Trinco 24 BP Sandblasting & Shotblasting

    • Manufacturer: Trinco
    • Model: 24 BP

    Good condition Trinco 24 BP Sandblasting & Shotblastings manufactured in 2025. Located in USA and other countries. Click request price for more information.

    USA
56789

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.