Building Filters
Pit-Type Furnaces
These furnaces are widely used in the following processes: hardening and tempering, cementation, carbonitriding, nitriding, tempering in a controlled atmosphere, and simple heating. The charge resides inside a st...
Cartigliano, Italy
Horizontal Retort Furnaces
No foundations are required to install this type of furnace, but they require more space. These highly technological furnaces are widely used in quenching and tempering, carburizing, carbonitriding, nitriding, co...
Cartigliano, Italy
OMPI PCRT1004/80.90P
- Manufacturer: FA.lCO.
Bale formation (cm): 80 x 90 x variable | Bale weight (kg): 450/500 | Hopper (cm): 80 x 75 | Horizontal ligation: No.4 wires | Legatore: Automatic Horizontal with thread tensioner | Tons of thrust: 45 | Power (h...
Arbizzano, Italy
Italcos IC SYSTEM 80hp
- Manufacturer: Italcos
Length (mt): 10 | Height (mt): 3 | Width (mt): 2,3 | Bale formation (cm): 170 x 102 | Bale weight (kg): 150/200 | Hopper (cm): 60 x 80 | Max pressure (bar): 300 | Tons of thrust: 94 | No-load cycles: 5/m' | Powe...
Arbizzano, Italy
CMA 40hp
- Manufacturer: FA.LCO. ASSISTANCE
Length (mt): 8,3 | Height (mt): 2,9 | Width (mt): 2,1 | Bale formation (cm): 110 x 80 | Hopper (cm): 150 x 102 | Max pressure (bar): 300 | Tons of thrust: 76 | No-load cycles: 4/m' | Power (hp): 40+7,5 | Hourly ...
Arbizzano, Italy
THEME 96/100
- Manufacturer: FA.LCO. ASSISTANCE
Bale formation (cm): 65 x 70 x variable | Bale weight (kg): 150/200 | Hopper (cm): 60 x 80 | Horizontal ligation: No.3 wires | Legatore: Automatic Horizontal | Tons of thrust: 30 | Power (hp): Hp 12 at 380V | Ho...
Arbizzano, Italy
ITALCOS TL25
- Manufacturer: Italcos
Bale formation (cm): 80 x 90 x variable | Bale weight (kg): 500/600 | Hopper (cm): 150 x 82 | Vertical ligation: No.4 wires | Legatore: Automatic Vertical | Tons of thrust: 60 | Power (hp): Hp 25 at 380V | Hourl...
Arbizzano, Italy
IC SYSTEM Logic 100
- Manufacturer: FA.LCO. ASSISTANCE
Bale formation (cm): 80 x 110 x variable | Installed power: 50×2 + 5,5 | Hopper (cm): 170 x 102 | Maximum pressure(bar): 300 | No-load cycles: 4/m' | Tons of thrust: 95 | Tank capacity: 1000 | Hourly production ...
Arbizzano, Italy
ITALCOS 10hp
- Manufacturer: Italcos
Length (mt): 4,4 | Height (mt): 1,8 | Width (mt): 2,8 | Bale formation (cm): 60 x 65 | Hopper (cm): 55 x 80 | Max press (bar): 200 | Tons of thrust: 12 | No-load cycles: 5/m' | Power (hp): 7,5+1,5 | Tank (lt): 9...
Arbizzano, Italy
IC SYSTEM 30hp
- Manufacturer: FA.LCO. ASSISTANCE
Length (mt): 8,5 | Height (mt): 2,7 | Width (mt): 2,1 | Bale formation (cm): 110 x 80 | Max press (bar): 300 | Hopper (cm): 150 x 102 | Horizontal ligation: No.3 wires | No-load cycles: 4/m' | Tons of thrust: 68...
Arbizzano, Italy
Monselice, Italy
Used 75-ton C.M.R.M. press
Used C.M.R.M. 75-ton press, semiautomatic, plate 90 x 70 cm, piston stroke 75 cm, cylinder diameter 20 cm, tank capacity 180 liters, operating pressure 210 bar, working. Total weight of the press approximately 4 ...
Used CM 35 ton press
Used CM 35-ton semi-automatic press, 90 x 70 cm plate, 70 cm spacing between plates, fully functional with no oil leaks. Total press weight: 3500 kg.
Planetary mixers 20/30/40/60 liters
According to European Law EN 453 Detachable product conveyor on the rear protection Power-assisted bowl lifting lever within the 250N of torce required by L.D. 626 Food-grade aluminium cam to avoid that paint or ...
Thiene, Italy
Standard Water Chillers
Tank made of AISI 304 stainless steel Compressor GAS R 452A Digital thermostat Vertical agitator Automatic loading Overload drain Mounted on wall (MRE-100-TH / wall support included) Mounted on feets (MRE-175-T a...
Thiene, Italy