Processing » Texas

Search By Category

Search By Manufacturer

Building Filters

414

Used side in Texas, USA

  • VESSELS/REACTORS 63475

    VESSELS/REACTORS 63475

    • Manufacturer: BOARDMAN

    DEGASSING COL. ACCUMULATOR; MFG. BY BOARDMAN; W/LUGS SUPPORT; NOZZLES-BTM 8"; SIDE 12", 3"; TOP 17", 12";

    Cleveland, TX
  • VESSELS/REACTORS 110680

    VESSELS/REACTORS 110680

      PREVIOUS SERVICE: WATER GLYCOL; MFG. BY EVANS & SONS IN 1983; ON LEG SUPPORTS; 8" SIDE NOZZLE; 2" CENTER BOTTOM;

      Cleveland, TX
    • VESSELS/REACTORS 112064

      VESSELS/REACTORS 112064

        TAR CRACKER RECOVERY PHENOL TANK; MFG. BY WALKER STAINLESS IN 1986; ON SADDLE SUPPORTS; PARTIAL DIMPLE JACKET ON BOTTOM SIDE;

        Cleveland, TX
      • TANKS 105650

        TANKS 105650

          MIXING TANK; BUILT IN 1997; NOZZLES: TOP 18" MANWAY, (2)1", .75", .50"; SIDE (2)1", .50";

          Cleveland, TX
        • VESSELS/REACTORS 93406

          VESSELS/REACTORS 93406

          • Manufacturer: PIERSOL PINE

          SODA ASH MIX TANK; MFG. BY PIERSOL PINE; LUG SUPPORTS; WITH PANEL COIL JACKET ON BOTTOM HEAD; WITH INTERNAL SIDE BAFFLES;

          Cleveland, TX
        • VESSELS/REACTORS 103134

          VESSELS/REACTORS 103134

          • Manufacturer: FABRICON

          MFG BY FABRICON IN 1988; FILTRATE SEPARATOR; NOZZLES: TOP 16"; SIDE 24", 16", 4"; BOTTOM 10"; ON 4 LEGS;

          Cleveland, TX
        • Trusted Seller
          Used Southern Heat Exchanger Corp.

          Used Southern Heat Exchanger Corp. Approximately 303 sq ft. 316L stainless steel shell and tube heat exchanger

          • Manufacturer: Southern Heat Exchanger Corp

          Used Southern Heat Exchanger Corp. Approximately 303 sq ft. 316L stainless steel shell and tube heat exchanger. 14" diameter X 20' face to face length. Carbon steel shell rated 75/FV@ 15 to 250 degrees F. (58) 1"...

          Cleveland, TX
        • Trusted Seller
          Used Southern Heat Exchanger Corp.

          Used Southern Heat Exchanger Corp. Approximately 289 sq ft. 316L stainless steel shell and tube heat exchanger

          • Manufacturer: Southern Heat Exchanger Corp

          Used Southern Heat Exchanger Corp. Approximately 289 sq ft. 316L stainless steel shell and tube heat exchanger. 14" diameter X 16' face to face length. Carbon steel shell rated 75@ 15 to 400 degrees F. (92) 3/4" ...

          Cleveland, TX
        • VESSEL

          VESSEL

            DIMPLE JKT ON SIDES AND BTM SS/304; FLAT BTM ON FOUR (4) PIPE LEGS.

            Houston, TX
          • Trusted Seller
            Used Southern Heat Exchanger Corp.

            Used Southern Heat Exchanger Corp. Approximately 706 sq ft. 316L stainless steel shell and tube heat exchanger

            • Manufacturer: Southern Heat Exchanger Corp

            Used Southern Heat Exchanger Corp. Approximately 706 sq ft. 316L stainless steel shell and tube heat exchanger. 38" diameter X 71 7/8" face to face length. Carbon steel shell rated 75/FV@ 15 to 350 degrees F. (30...

            Cleveland, TX
          • Trusted Seller
            120 Gal Tank, S/S

            120 Gal Tank, S/S

              120 Gal Tank, S/S Used 120 Gal Tank, stainless steel construction, approximately 34" diameter x 32" straight side, flat hinged top, flat bottom.

              Texas, USA
            • Trusted Seller
              120 Gal Tank, S/S

              120 Gal Tank, S/S

                120 Gal Tank, S/S Used 120 Gal Tank, stainless steel construction, approximately 34" diameter x 32" straight side, flat hinged top, flat bottom.

                Texas, USA
              • VESSELS/REACTORS 103281

                VESSELS/REACTORS 103281

                • Manufacturer: GASTON COUNTY

                MFG. BY GASTON COUNTY IN 1982; ON LEGS; NOZZLES: TOP 8", (2)1.5"; SIDES 12", 6", 3"; BOTTOM 2";

                Cleveland, TX
              • TANKS 76521

                TANKS 76521

                • Manufacturer: AUGUSTA

                PRECIP. SODIUM; MFG. BY AUGUSTA IN 1994; ON 4 LEGS; NOZZLES: TOP (2)2", 3"; BTM. 2"; SIDES 2", 8";

                Cleveland, TX
              • DRYERS 113226

                DRYERS 113226

                • Manufacturer: VOMM TURBOTECHNOLOGIA

                Used Vomm approximately 0.7 cubic meter (26 cubic feet) 304 stainless steel (1.4307) jacketed 'Turbo' continuous paddle dryer, manufactured by Vomm Turbotechnologia, approx 450mm diameter x 4.5m straight side, bo...

                Cleveland, TX
              89101112

              Overview

              Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

              FAQ

              What should I consider when buying used processing equipment?

              Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

              How do I arrange shipping for processing equipment?

              Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

              What is the typical maintenance for processing equipment?

              Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.