Processing » Texas

Building Filters

196

Used continuous in Texas, USA

  • BEPEX CRUJ-400 61808

    BEPEX CRUJ-400 61808

    • Manufacturer: BEPEX

    Installed but Never Used 400 cubic feet Bepex carbon steel Paddle Continuator Dryer. Model CRUJ-400. Dryer was going to be utilized as a Hydrotreater to run 5.8 short Tons per Hour of sludge. Dryer was designed f...

    Cleveland, TX
  • BEPEX CRUJ-400 61807

    BEPEX CRUJ-400 61807

    • Manufacturer: BEPEX

    Installed but Never Used 400 cubic feet Bepex carbon steel Paddle Continuator Dryer. Model CRUJ-400. Dryer was going to be utilized as a Hydrotreater to run 5.8 short Tons per Hour of sludge. Dryer was designed f...

    Cleveland, TX
  • Lamort Diabolo

    Lamort Diabolo

    • Manufacturer: Lamort

    Used Fiberprep Lamort Diabolo model 99DBL3 Size 3 SSscreen. Designed for a capacity of 80 to 150 tpd for the discontinuous and continuous tailing (last stage) screening.

    Cypress, TX
  • YOUNG INDUSTRIES RIBBON BLENDER

    YOUNG INDUSTRIES RIBBON BLENDER

    • Manufacturer: Young Industries

    304 SS; BLT: 1998; 2 HP DRIVE; 40 CU. FT. RIBBON BLENDER DISHCARGES INTO A 6" X 92" MULTI-STAFE CONTINUOUS MIXER. BLENDER IS POWERED BY A 2 HP MOTOR;

    Houston, TX
  • CLARK 3MX8-5

    CLARK 3MX8-5

    • Manufacturer: Clark

    CLARK JOB NO. C-7975 A/B, IN TRAIN WITH COMPRESSOR 113-10861 AND TURBINE 113-10991TT, TURBINE HP ESTIMATED AT 2500, SN: 3X-5-786; MAXIMUM CONTINUOUS SPEED 9006 RPM.

    Houston, TX
  • DELAVAL 9CK37 100425

    DELAVAL 9CK37 100425

    • Manufacturer: Delaval

    KELLOGG #101-J UNUSED CENTRIFUGAL AIR COMPRESSOR WITH STEAM TURBINE 101JT; MOUNTED ON SKID; CONTINUOUS SPEED 8379 RP; CRITICAL SPEED 3600 RPM; 600 PSIG DISCHARGE @ 450 DEG. F.; BUILT IN 1982; 9 STAGES;

    Cleveland, TX
  • DRESSER RAND MTGB-224 100434

    DRESSER RAND MTGB-224 100434

    • Manufacturer: DRESSER RAND

    CAPACITY INLET 962 CFM; SIZE MTGB-224;MAX CONTINUOUS SPEED 12100 RPM; CASING DESIGN PRESSURE INLET & OUTLET 1750 PSIG; MAX TEMP 350 DEG. F.; HYDROSTATIC TEST PRESSURE INLET AND OUTLET 2625 PSIG; WITH (2) IMPELL...

    Cleveland, TX
  • BIRD (BAKER HUGHES) HP2400 93131

    BIRD (BAKER HUGHES) HP2400 93131

    • Manufacturer: Hughes

    DI-PE SECONDARY CENTRIFUGE; (1) 25 HP BACK DRIVE @ 3600 RPM; 460 VOLT & (1) 50 HP MAIN DRIVE; 3600 RPM MAX; 480 VOLTS; BUILT IN 2000; CONTINUOUS TYPE; 10 DEG. CONE; LEFT HAND ROTATION;

    Cleveland, TX
  • CLARK 3MX8-5

    CLARK 3MX8-5

    • Manufacturer: Clark

    CLARK JOB NO. C-7975 A/B, IN TRAIN WITH COMPRESSOR 113-10860, AND TURBINE 113-10858T, TURBINE HP ESTIMATED AT 2500, S/N 3X-5-788, MAXIMUM CONTINUOUS SPEED 9006 RPM

    Houston, TX
  • CLARK 745B3 94610

    CLARK 745B3 94610

    • Manufacturer: Clark

    PRICE INCLUDES SPARE ROTOR; RECYCLE COMPRESSOR; 13,127 ACFM INLET CAPACITY; 37.5 PSIA INLET; 67.5 PSIA DISCHARGE; MAX CONTINUOUS SPEED 8476 RPM; CASING DESIGN TEMP 500 DEG. F.; MAX OPERATING TEMP 380 DEG. F.; (...

    Cleveland, TX
  • DELAVAL 7CL44 95056

    DELAVAL 7CL44 95056

    • Manufacturer: Delaval

    KELLOGG 105-J UNUSED CENTRIFUGAL AMMONIA REFRIGERATION COMPRESSOR; CONTINUOUS SPEED 7665 RPM; 1ST CRITICAL SPEED 3000 RPM; BUILT FOR 1500 TPD KELLOGG AMMONIA PLANT; A SIDE LOAD IS ADDED TO THE GAS STREAM DUE TO...

    Cleveland, TX
  • CLARK 2M4

    CLARK 2M4

    • Manufacturer: Clark

    CLARK JOB NO. C-7975 A/B, IN TRAIN WITH COMPRESSOR 113-10859 AND TURBINE 113-10991T, SN: 2-4-787; TURBINE HP ESTIMATED AT 2500, FIRST CRITICAL SPEED 11600 RPM, MAXIMUM CONTINUOUS SPEED 9006 RPM.

    Houston, TX
  • CLARK 2M4

    CLARK 2M4

    • Manufacturer: Clark

    CLARK JOB NO. C-7975 A/B, IN TRAIN WITH COMPRESSOR 113-10858 AND TURBINE 113-10858T, TURBINE HP ESTIMATED AT 2500. S/N 2-4-789, FIRST CRITICAL SPEED 11,600 RPM, MAXIMUM CONTINUOUS SPEED 9006 RPM.

    Houston, TX
  • SIEMENS STC-SV 106119

    SIEMENS STC-SV 106119

    • Manufacturer: Siemens
    • Model: STC-SV

    UNUSED; SIEMENS TYPE STC-SV (08-9B) CENTRIFUGAL COMPRESSOR; MAX. CONTINUOUS SPEED 11497 RPM; CASING MAX ALLOWABLE PRESSURE 1690 PSI; 9 IMPELLERS; 487 MM OF DIAMETER (4) AND 468 MM OF DIAMETER (5); MIN OPERATING ...

    Cleveland, TX
  • SIEMENS STC-SV 106120

    SIEMENS STC-SV 106120

    • Manufacturer: Siemens
    • Model: STC-SV

    UNUSED; SIEMENS TYPE STC-SV (08-9B) CENTRIFUGAL COMPRESSOR; MAX. CONTINUOUS SPEED 11497 RPM; CASING MAX ALLOWABLE PRESSURE 1690 PSI; 9 IMPELLERS; 487 MM OF DIAMETER (4) AND 468 MM OF DIAMETER (5); MIN OPERATING S...

    Cleveland, TX
56789

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.