Processing » Slovakia

Building Filters

29

Used pumps in Slovakia

  • Demag ERGOTECH 4200/800-1450 SYSTEM (2001,

    Demag ERGOTECH 4200/800-1450 SYSTEM (2001, NEW Pump,new barrel!) 420 ton

    • Manufacturer: Demag
    • Model: Ergotech

    Clamping force: 420 tons Max. mold weight: 5100 kg Min. mold height: 380 mm Max. mold height: 820 mm Distance between tie bars: 800 x 710 mm Centering ring fix: 160 mm Screw diameter: 50 mm Injection volum...

    Slovakia
  • RESERVED: Arburg 420 C 1000-290

    RESERVED: Arburg 420 C 1000-290 (pump only 22.000 working hours)

    • Manufacturer: Arburg
    • Model: 420 C

    Clamping force: 100 tons Opening stroke: 500 mm Mould height: 250 mm Clamping platen daylight: 750 mm Mould clamping plattens (b x h) : 580 x 580 mm Ejector stroke: 125 mm Screw diameter: 40 mm Shot weight...

    Slovakia
  • RESERVED Injection molding machine Krauss

    RESERVED Injection molding machine Krauss Maffei 350 (tons) - 750/380 CX Z 2K (rotary table) , new pumps

    • Manufacturer: Krauss-Maffei

    KM350-750-380 CXZ Year: 2013 Controll : MC5 Clamping force: 350 tons Tie bar distance HxV: 950 x 850 mm Max./Min. mold height: 920 x 380 mm Main injection unit SP 750 Screw diameter: 50 mm Injection volum...

    Slovakia
  • 2005 Siemens D-91055 ERLANGEN Demag

    2005 Siemens D-91055 ERLANGEN Demag 110 ton PUMP + motor

    • Manufacturer: Siemens

    Demag 1100/470-430 tons pump (2005)

    Slovakia
  • RESERVED Arburg 720 S 3000-1300

    RESERVED Arburg 720 S 3000-1300 Golden Edition (hours: 36000, servo pumps)

    • Manufacturer: Arburg

    Clamping force: 300 ton Opening path: 700 mm Mould installation height min: 400 mm Daylight: 1250mm Distance between tie bars: 720 x 720 mm Platten size: 1040 x 1040 mm Screw diameter: 60 mm Injection volu...

    Slovakia
  • 3x Krauss Maffei PUMP type

    3x Krauss Maffei PUMP type IPV 6 (from injection molding machine Krauss Maffei

    • Manufacturer: Krauss-Maffei

    3x Krauss Maffei pump (available 2 units, one sold) on europallet

    Slovakia
  • (2014) Arburg Allrounder 420 C

    (2014) Arburg Allrounder 420 C 1000-290 Golden Edition

    • Manufacturer: Arburg
    • Model: Allrounder 420

    Clamping force: 100 t Opening stroke: 500 mm Distance between platten:(b x h) 570x570 mm Clear column spacing: 420x420 mm Ejector stroke: 175 mm Ejector force: 40 kN Hydraulic pump: 23,9 kW Screw: 35 mm, ...

    Slovakia
  • Reserved: 1998 Engel ES650/125HL +

    Reserved: 1998 Engel ES650/125HL + robot

    • Manufacturer: Engel
    • Model: ES 650

    Controll : CC100 Clamping force: 125 ton Platen size : 740x 480 mm Opening max: 850 mm Screw dia: 50 mm Injection volume: 392 cm3 Pump drive power: 22 kW Heating power: 15,3 kW Weight: 9000kg

    Trenčín, Slovakia
  • 2016 PIOVAN Aquatech CA1921MT Chiller

    2016 PIOVAN Aquatech CA1921MT Chiller

    • Manufacturer: Piovan

    Condition: funtional 90 kW 400 V number of fans 3 tank capacity 1650 liters pump: 24/66 m3/h 3,25/2,25 bar 5,50 kW refrigerant type R407c weight 1650 kg, Lenght 3850 mm x 1500 x H 2240 mm

    Slovakia
  • Engel INSERT 200H/40 vertical rotary

    Engel INSERT 200H/40 vertical rotary table (2004)

    • Manufacturer: Engel
    • Model: Insert

    Engel INSERT 200H/40 Control: CC100 Condition: funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x3...

    Slovakia
  • 2015 Engel victory 200/50 spex

    2015 Engel victory 200/50 spex

    • Manufacturer: Engel
    • Model: Victory

    Clamping force: 50 t Opening stroke: 407 mm Ejector stroke: 100 mm Ejector force 39,8 kW Pump drive power 15 kW Screw: 25 mm Max swept volume 69 cm3 Screw speed max 480 r/min Injetion rate: 104 cm3/s Inj...

    Slovakia
  • (2007) ARBURG 570C 2000-800 Golden

    (2007) ARBURG 570C 2000-800 Golden edition

    • Manufacturer: Arburg

    Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] ...

    Trenčín, Slovakia
  • Negri Bossi 10000H-8400 (1000 tons)

    Negri Bossi 10000H-8400 (1000 tons)

    • Manufacturer: Negri Bossi

    Year: 2015 Clamping unit Max clamping force: 10000 kN Distance between tie bars: 1150 x 1350 mm Platen dimensions: 1700 x 1900 mm Min / max mould height: 500-1200 mm Nozzle forward power: 124 kN Max. openi...

    Trenčín, Slovakia
  • RESERVED: Krauss Maffei KM 420-2000

    RESERVED: Krauss Maffei KM 420-2000 CX (2015) Blue Power

    • Manufacturer: Krauss-Maffei

    MC6 control with color monitor Clamping unit Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Min./max. mold...

    Trenčín, Slovakia
  • 1998 KOREA LG Cable and

    1998 KOREA LG Cable and Machinery type IDE850EN, 850 ton Injection Molding Machine

    • Manufacturer: KOREA LG Cable and Machinery

    Clamping force: 850 ton Openig force: 63,5 t Tie bar between: 1100x1100 mm Mold Platens 1580x1580 mm Max. volume: 5000 Shot volume: 4600 PS Injection pressure:1770 kg/cmš Clamping stroke: 1750 mm Daylight...

    Slovakia
12

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.