Processing » Slovakia

Building Filters

28

Used hydro in Slovakia

  • Hydraulic clamping system PASCAL

    Hydraulic clamping system PASCAL

    • Manufacturer: Pascal Japan

    Hydraulic clamping system PASCAL Force: 160kN Manufacturer: Pascal corp. , made in Japan

    Slovakia
  • 2019 Wittmann MacroPower 1100 /

    2019 Wittmann MacroPower 1100 / 8800 SERVO-hydraulic

    • Manufacturer: Wittmann

    WITTMANN BATTENFELD MacroPower 1100 / 8800 1100t injection molding machine (2019). servo-hydraulic injection machine - Screw diameter: 105 mm. - Injection volume: 4.545 cm³. - Screw speed: 159 rpm. - Screw L...

    Slovakia
  • 2013 HAITIAN JUPITER 13000-10600

    2013 HAITIAN JUPITER 13000-10600

    • Manufacturer: HAITIAN

    Hours approx: 22.000 Machine is sold without robot, possible to buy TECHNICAL DATA CLAMP UNIT CLAMPING FORCE PLATEN SIZES D.B.T.B. MIN MOULD HEIGHT MAX MOULD HEIGHT MOULD OPENING STROKE MAX DAYLIGHT HY...

    Trenčín, Slovakia
  • Engel duo 2490/900

    Engel duo 2490/900

    • Manufacturer: Engel

    duo 2460/900 Controll: CC300 Clamping force: 900 ton Hydraulic year: 2019 Hours: 1557 Tie Bar distance: 1170 x 1000 mm Platen size: 1550x 1520 mm Max Platen opening: 2300mm Screw: 60 mm Injection volume...

    Trenčín, Slovakia
  • (2007) ARBURG 570C 2000-800 Golden

    (2007) ARBURG 570C 2000-800 Golden edition

    • Manufacturer: Arburg

    Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] ...

    Trenčín, Slovakia
  • (2013) Krauss Maffei KM1300 -

    (2013) Krauss Maffei KM1300 - 8100 MX

    • Manufacturer: Krauss-Maffei

    KM1300 - 8100 MX Year of manufacture 2011 KM1300MX Clamping force ton: 1300 Tie bar distance: 1570 x 1270 mm Mould height min/max: 700/1400 mm Plate dimensions: 2210x1910 mm Opening stroke : 2350 mm Max D...

    Trenčín, Slovakia
  • RESERVED: 2006 DEMAG Extra 100-310

    RESERVED: 2006 DEMAG Extra 100-310

    • Manufacturer: Demag

    Clamping force: 100 tons Distance between tie bars: 400 x 400 mm Clamping plates dimensions: 540 x 540 mm Max mould weight: 510 kg Ejector path: 150 mm Screw diameter: 35 mm Injection volume: 168 cm3 Injec...

    Slovakia
  • (2014) Arburg Allrounder 420 C

    (2014) Arburg Allrounder 420 C 1000-290 Golden Edition

    • Manufacturer: Arburg
    • Model: Allrounder 420

    Clamping force: 100 t Opening stroke: 500 mm Distance between platten:(b x h) 570x570 mm Clear column spacing: 420x420 mm Ejector stroke: 175 mm Ejector force: 40 kN Hydraulic pump: 23,9 kW Screw: 35 mm, ...

    Slovakia
  • RESERVED Krauss Maffei KM1300 -

    RESERVED Krauss Maffei KM1300 - 8100 MX (2011) , 1300 ton machine

    • Manufacturer: Krauss-Maffei

    KM1300 - 8100 MX Year of manufacture 2011 KM1300MX Clamping force ton: 1300 Tie bar distance: 1570 x 1270 mm Mould height min/max: 700/1400 mm Plate dimensions: 2210x1910 mm Opening stroke : 2350 mm Max D...

    Trenčín, Slovakia
  • RESERVED: Krauss Maffei KM 420-2000

    RESERVED: Krauss Maffei KM 420-2000 CX (2015) Blue Power

    • Manufacturer: Krauss-Maffei

    MC6 control with color monitor Clamping unit Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Min./max. mold...

    Trenčín, Slovakia
  • Arburg 470S 1300-350, year 2006

    Arburg 470S 1300-350, year 2006 Injection Molding Machine, new hydromotor

    • Manufacturer: Arburg
    • Model: 470S 1300-350

    - Clamping force 130 t - Srew 35 mm - Shot weight 127 g/PS - Distance between colums 470x470 mm - Effective screw length: 23 L/D - Screw travel 145 max. mm - Calculated stroke volume 139 max. cm3 - Injection pres...

    Slovakia
  • Krauss Maffei from KM500: Plasdan

    Krauss Maffei from KM500: Plasdan PRX.1000 ROTARY TABLE for 2K mold

    • Manufacturer: Krauss-Maffei

    from injection molding machine KM500 year 2010, Turntable MOD:PRX.1000, weight 1500 kg The table is fully functional, but there is no electricity. closet. However, it can be converted into a hydraulic motor and...

    Slovakia
  • Wittmann Battenfeld EcoPower 180/750 UNILOG

    Wittmann Battenfeld EcoPower 180/750 UNILOG B6, electric machine 180 TON (3) (year 2012)

    • Manufacturer: Battenfeld

    Wittmann Battenfeld EcoPower 180/750 UNILOG B6 Clamping force: 180 tons Screw diameter: 45 mm Weight of the molding max: 325.6 gPS Dimensions between guide columns: 580x520 mm Min. tool height: 225 Max. too...

    Slovakia
  • Battenfeld TM 1600/1000, 160 ton

    Battenfeld TM 1600/1000, 160 ton (8) (year:2002)

    • Manufacturer: Battenfeld
    • Model: TM 16001000

    - clamping force 160 tons - screw diameter 55 mm - weight of the molding max 540.4 gPS - dimensions between guide columns mm - min. tool height 225 mm - max. tool height 550 mm - closing the joint - weight 7500 k...

    Slovakia
  • RESERVED: 2012 Arburg Allrounder 375

    RESERVED: 2012 Arburg Allrounder 375 V 500-290 Vertical Injection Molding Machine

    • Manufacturer: Arburg
    • Model: Allrounder

    26835 motohours clamping force 50 ton screw diameter 30 mm closing pistons type of oil Optima 32ZP volume of liters 120 screw type % glass: PK-V 30%, type of srew D30 L=978 weight of molding max 92 g PS d...

    Slovakia
12

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.