Used sheets in Saxony, Germany

Stainless steel sheets 1.4301 - 2500x1250x8 mm #10025P25

Article weight: 200,00 kg

2006 Cold store incl. shelves approx. 50 x 15 x 30 m #B16009

utilized tem. range 3-12° C Steel hall, refrigerated hall Sandwich panel cladding used used tem. range approx. 3-12° C with sprinkler system and air dehumidification The hall is separated in the middle by a parti...

VOLZ pocket filter

Pocket filter, 3 pieces VOLZ 33-330184 Meltblown F9 8 filter bags unused!

CAMFIL safety filter housing

• Manufacturer: Camfil

Safety filter housing, safety replacement filter housing CAMFIL , FARR CamSafe P1/1000 Item no. 518014 3x pressure measuring point 1/2-PI , art. no. 518540 1x leak test connection CS , art. no. 518545 two doors f...

ZIEHL-ABEGG axial fan

• Manufacturer: Ziehl-Abegg

Axial Ziehl-Abegg FB series 4-bladed aluminum sheet wing Protection :: IP 54

OTTO KLEIN compressed air tanks

Pressure vessel, compressed air tank with holder OTTO KLEIN SHEET STEEL PROCESSING OKS 486315 RST372 used, tested !

2007 Sermeto 01

• Manufacturer: Sermeto
• Power requirement: 2.8 kW

Slat-band conveyor very good, little used condition. Cooling water tank 1300 x 2050 x 260mm discharge length D=500mm Total chip intake length approx. AX= 4120mm with sheet metal tray with rubber coating, width 23...

Stainless steel tank 3500 l #B17494

Stainless steel tank, stainless steel tank used Volume approx. 3500 l Stainless steel sheet Subject to changes and errors in technical data, specifications and prices as well as prior sale.

2010 Richter SP 450 / 63

• Manufacturer: Richter
• Power requirement: 0.75 kW

Made of sturdy sheet steel construction. This is a scraper belt conveyor. Drop-in width: F1= 480mm; Drop-in length: 750mm Ejection: height H = 3200mm Infeed (underfeed to the machine): height = 300mm + superstruc...

2004 Becker DT 4.10

• Manufacturer: Becker

Vacuum pump rotary vane compressor Becker DT-4.10 used. 230 V; 50/60 Hz; 1420/1700 rpm dry running and air cooled size approx. 450 x 250 x 250 mm weight approx. 30 kg Link to the data sheet at the manufacturer as...

1996 EFD MINAC 15 m/Cooler

• Manufacturer: EFD

The device is a mobile induction heater with medium power (15 kW), suitable for: Local heating of metals (e.g., bearings, bolts, screws, pipes, sheet metal edges). Preheating for welding processes Soldering and s...

2013 DGS SSF650P50

• Manufacturer: DGS
• Power requirement: 3.5 kW

Slat-band chain conveyor With coolant tank incl. pump output 250 l/min. sufficient for a conveying height of 25m. Very good little used condition. Chip intake length Ax= 3000mm (attachment with sheet metal tray w...

2011 Pipe auger approx. 4.7 m #B16420

• Manufacturer: SIMA GmbH

SIMA Ltd. pitch approx. 450 mm Pipe screw conveyor, screw conveyor used conveying length (from inlet to outlet): approx. 4,7 m spiral sheet approx. 7 mm offset bearing with stuffing box drive with gear motor 9,2 ...

Conveyor belt, flat belt 8.1 x 1.56 m B17755 #1sssssssssssss #B17805

Used conveyor belt, flat belt, transport belt Belt length approx. 8.1 m Belt width approx. 1.56 m The belt runs over a sheet metal plate and has only two pulleys Driven by up to two slow-speed gear motors Total d...

Conveyor belt, flat belt 8.1 x 1.56 m #B17755

Used conveyor belt, flat belt, transport belt Belt length approx. 8.1 m Belt width approx. 1.56 m The belt runs over a sheet metal plate and has only two pulleys Driven by up to two slow-speed gear motors Total d...