Used metal processing in Saxony, Germany

Coolant tank with BRINKMANN SGL332/510 #B16726

• Manufacturer: Brinkmann

Ø approx. 800 mm Coolant tank, oil tank, emulsion tank, lifting system with submersible slurp pump used Filling capacity approx. 180 l with BRINKMANN pump SGL 332/510-MV+211 1.3 kw 400 V The emulsion tank was par...

5 lfm. Roller conveyor

• Manufacturer: LFM

on underframe, shelf

Pedestal fan

1996 EFD MINAC 15 m/Cooler

• Manufacturer: EFD

The device is a mobile induction heater with medium power (15 kW), suitable for: Local heating of metals (e.g., bearings, bolts, screws, pipes, sheet metal edges). Preheating for welding processes Soldering and s...

Rapmet / Ulma Euro mesh box galvanized (1200/800/600)

• Manufacturer: Ulma

Rapmet / Ulma Euro pallet cage, galvanized (1200 × 800 × 600 mm) – with half-side hinged door, 4 crane eyes, sturdy metal floor & 1,500 kg load capacity The Rapmet / Ulma Euro pallet cage, galvanized (1200 × 800 ...

2007 Sermeto 01

• Manufacturer: Sermeto
• Power requirement: 2.8 kW

Slat-band conveyor very good, little used condition. Cooling water tank 1300 x 2050 x 260mm discharge length D=500mm Total chip intake length approx. AX= 4120mm with sheet metal tray with rubber coating, width 23...

2013 DGS SSF650P50

• Manufacturer: DGS
• Power requirement: 3.5 kW

Slat-band chain conveyor With coolant tank incl. pump output 250 l/min. sufficient for a conveying height of 25m. Very good little used condition. Chip intake length Ax= 3000mm (attachment with sheet metal tray w...

2013 DGS SSF650P50

• Manufacturer: DGS
• Power requirement: 3.5 kW

hinged type chip conveyor, as good as new With coolant tank incl. pump (submersible centrifugal pump) Delivery rate 250 l/min. = sufficient for a conveying height of 25m Chip insertion length (A) 3000mm (attachme...

UAS Patronenfilter Standart I

• Manufacturer: UAS
• Power requirement: 2.2 kW

Cartridge filter/ smoke gas separator with spark pre-separator (H2O) for combustible dusts. Sheet metal construction. Pressure 2,250 Pa Temperature max. 65°C Compressed air tank size Ø 150x 480mm with 1x hose con...

Roller conveyor approx. 1.7 x 2.1 m #B17672

Roller conveyor, roller conveyor, used roller conveyor metal rollers Roller width approx. 2160 mm Roller diameter approx. Ø 60 mm Total dimensions approx. 1700 x 2300 x 900 mm Subject to changes and errors in tec...

Roller conveyor 4 x 0.45 m #B17156

Roller conveyor, roller conveyor, used roller conveyor metal rollers Roller width approx. 370 mm Roller diameter Ø 50 mm Total dimensions approx. 4000 x 450 x 850 mm Subject to changes and errors in technical dat...

Conveyor belt, flat belt 8.1 x 1.56 m B17755 #1sssssssssssss #B17805

Used conveyor belt, flat belt, transport belt Belt length approx. 8.1 m Belt width approx. 1.56 m The belt runs over a sheet metal plate and has only two pulleys Driven by up to two slow-speed gear motors Total d...

Roller conveyor approx. 3.6 x 0.74 m #B17791

Used Roller Conveyor - Item B17791 This used roller conveyor consists of two metal roller conveyors from the INTERROLL brand. It is ideal for material transport in industry and manufacturing. Each conveyor has a ...

Conveyor belt, flat belt 8.1 x 1.56 m #B17755

Used conveyor belt, flat belt, transport belt Belt length approx. 8.1 m Belt width approx. 1.56 m The belt runs over a sheet metal plate and has only two pulleys Driven by up to two slow-speed gear motors Total d...

Roller conveyor approx. 2 x 2.3 m #B17675

Roller conveyor, roller conveyor, used roller conveyor metal rollers driven roller width approx. 1690 mm mm Roller diameter approx. Ø 80 mm Total dimensions approx. 2400 x 1900 x 850 mm A used gear motor can be r...