Used Processing in Portugal

Lemorau CTA 1500

• Manufacturer: LEmorau

Lemorau CTA 1500 is an automatic core cutter machine. Its function is cutting cores in a desired measure over its total length and in a selected quantity. Built with heavy-duty components to exact specifications,...

Lemorau EBRM+

• Manufacturer: LEmorau

Lemorau EBRM + is an affordable table top digital finishing machine that can coat, die cut, slit and rewind digital printed webs. Due to an electronic feeder roll, the machine can be used as in-line finishing mac...

Screen conveyor

1 Screen conveyor 1400 mm width (screen) 1500 mm length 940 mm high With adjustable feet Motorized With geared motor 0,18 Kw, 230/400V, 50 Hz Speed 4 mt/min. Without electrical panel - a circuit breaker with safe...

Mixing tank with motor and mixer for 2-component glue

MIXING TANK WITH ENGINE AND MIXER FOR TAIL TO 2 COMPONENTS, TANK CAPACITY TOTAL 250 LT; BENEFITABLE CAPACITY 150 LT; COPIED FUND; Ø 600 MM; TOTAL TANK HEIGHT 810 MM; TANK IN STAINLESS STEEL ROD IN STAINLESS STEEL...

Tank for preparation, mixing of salts of ammonium sulphate in water.

Tank for preparation, mixing of ammonium sulfate salts in water, polyethylene tank resistant to ammonium sulfate and possible urea contamination. total tank capacity 300 lt; useful capacity 150 lt; cupped bottom;...

Ultrasonic cleaning machine for particle filters / collectors

Ideal machine for cleaning particulate filters and collectors.

Air Dryer PS 43 - 4300l/min

Fine Oil Separator Filter - HM 72

• Manufacturer: Cetrus

HM Filter - Filtration grade 0.01 micron + residual oil 0.01 mg/m 3 To be installed after QM and PM filters. It is a filter very similar to the PM series, differing only in the filtration grade. This filter allow...

Fine Oil Separator Filter - HM 34

• Manufacturer: Cetrus

HM Filter - Filtration grade 0.01 micron + residual oil 0.01 mg/m 3 To be installed after QM and PM filters. It is a filter very similar to the PM series, differing only in the filtration grade. This filter allow...

Fine Oil Separator Filter - HM 18

• Manufacturer: Cetrus

HM Filter - Filtration grade 0.01 micron + residual oil 0.01 mg/m 3 To be installed after QM and PM filters. It is a filter very similar to the PM series, differing only in the filtration grade. This filter allow...

Oil Separator Filter - PM 30

• Manufacturer: Cetrus

PM Filter - filtration grade 1 micron + residual oil 0.5 mg/m 3 To install after the drier or QM filters. This filter, following the principles of shear and coalescence, forces the particles of the oily fluid to ...

ECK TWIN 12

The complete station for R134a and HFO1234yf The Ecotechics ECK TWIN 12 is the renewed expression of the functional and technological capabilities of the Ecotechnics brand. Two machines in one is a simple, fast a...

Set of 14 endothermic panels 36kW

• Manufacturer: Cetrus

Composition:- Dimension of each REAR panel (mm): 2400x730x39 - Size of each SIDE panel (mm): 2400x730x39 - Size of each TOP panel (mm): 2400x290x39 - High-rigidity aluminum frames with chamfered edges and protect...

Set of 4 endothermic panels 4.4kW

• Manufacturer: Cetrus

Pre-filter QM 72

QM Pre-Filter - Micron Grade 5 Should always be installed before the dryer. A long service life combined with excellent heat resistance to heat and abrasion makes it ideal means of initial protection of a compres...