Processing » New York

Search By Category

Search By Manufacturer

Building Filters

811

Used controller in New York, USA

  • Yamato FO-200CR 3.75 Liter Muffle

    Yamato FO-200CR 3.75 Liter Muffle Furnace with Communication Port

    • Manufacturer: Yamato

    Yamato FO-200CR Muffle Furnace, 3.75L 115V 14.5A 50/60Hz, with Communication Port Yamato muffle furnaces are recognized for their durability and tightly sealed doors. The FO Series represents the standard type of...

    $3,064 USD
    Ontario, NY
  • Yamato FO-100CR 1.5 Liter Muffle

    Yamato FO-100CR 1.5 Liter Muffle Furnace with Communication Port

    • Manufacturer: Yamato

    Yamato FO-100CR Muffle Furnace, 1.5L 115V 10A 50/60Hz, with Communication Port Yamato muffle furnaces are recognized for their durability and tightly sealed doors. The FO Series represents the standard type of mu...

    $2,788 USD
    Ontario, NY
  • MGB 8″ SCREEN CHANGER

    MGB 8″ SCREEN CHANGER

      MGB 8 inch screen changer complete with operator control, hydraulic accumulator and Hydraulic power unit. come out of power three months ago, was installed on a 6 inch extruder.

      Rockville Centre, NY
    • TORIT DUST COLLECTOR MODEL #64

      TORIT DUST COLLECTOR MODEL #64 #13893

      • Manufacturer: Donaldson / Torit / DCE

      One Torit Dust Collector, Model 64. Unit has ON/OFF controls, 3/4 HP, 208/230/460 Volt, 3 Ph, 60 Hz, 3450 RPM, Serial K 536, Cartridge Dust Collector.

      Jefferson Valley, NY
    • Trusted Seller
      1990 HEARTLAND HIL 3648

      1990 HEARTLAND HIL 3648

      • Manufacturer: Heartland RV

      SPECIFICATIONS Max Mold Size 36″ x 48″ Top Oven Infrared Oven Elements Bottom Oven Infrared Oven Elements Top & Bottom Oven Zones 26 / 26 Top Platen Stroke 12″ Bottom Platen Stroke 6″ Cutler Hammer PLC Controller...

      Valley Cottage, NY
    • Trusted Seller
      AMF 340-qt Mixer with (3)

      AMF 340-qt Mixer with (3) SS Bowls

      • Manufacturer: AMF

      AMF 340-qt Mixer with (3) SS Bowls - Model 74-36, serial#681 - Upgraded drive system - (3) SS bowls on casters - Flat beater and 4-wing beater - New scrapers for the paddle - Timer - Power bowl lift - Main plan...

      New York, USA
    • Extrema DB-100 10HP 3PH Dust

      Extrema DB-100 10HP 3PH Dust Collection Blower

      • Manufacturer: Extrema

      Our dust blowers are made up of a heavy duty dynamically balanced vaneaxial fan with safety guards on all inlets. The steel impeller is mounted directly to the shaft of the stand-mounted motor. Motors are availab...

      Dundee, NY
    • Trusted Seller
      LYLE INDUSTRIES 140P2

      LYLE INDUSTRIES 140P2

      • Manufacturer: LYLE INDUSTRIES

      Used Lyle 40 x 40 Thermoformer Model 140 FH New in 1995 Max Mold 40''x40'' Top Oven Quartz - 29 Zones total top and bottom Bottom Oven Carlod - Draw Depth 6.0'' Platen Stroke 7.0'' Form Station Tonnage 80 Top Pla...

      Valley Cottage, NY
    • Trusted Seller
      Starview SDC-30

      Starview SDC-30

      • Manufacturer: StarView

      At a Glance:Effective for cutting skin boards where it is desirable to trim packages with product facing up Available with slitting wheels for cutting or perforating Cross-cut may be straight or rounded corners a...

      Valley Cottage, NY
    • ScrubMAX Logwasher

      ScrubMAX Logwasher

      • Manufacturer: Emerald Modular Washing

      ScrubMAX ™ range provides aggressive high speed scrubbing to alleviate contamination (silts, clays and organics) to produce clean saleable product. Modular design enables fast setup time onsite with minimal footp...

      Salina, NY
    • Ensign Powered Incline Auger 73″

      Ensign Powered Incline Auger 73″ x 90″ – New 2017

      • Manufacturer: Ensign

      Ensign Powered Incline Auger 73″ x 90″ – New 2017 73″ x 90″ 75″ discharge height 7″ OD auger 208 volt with variable frequency drive inverter motor startere controls

      Rockville Centre, NY
    • 2 CUFT Patterson Kelley Twin

      2 CUFT Patterson Kelley Twin Shell Dry V Blender

      • Manufacturer: Patterson-Kelley

      Patterson Kelley Twin Shell Dry V Blender 2 CU FT. Includes Blender control. MAXIMUM MATERIAL DENSITY OF 60 LBS./CUBIC FOOT. volt :208/60/3 ph

      Farmingdale, NY
    • Fluid Air Model 0002XP Fluid

      Fluid Air Model 0002XP Fluid Bed Processor

      • Manufacturer: Fluid Air

      Fluid Air lab fluid bed dryer, model 0002, stainless steel and glass construction, with 2 liter bowl, with peristaltic feed pump and plc controls, 208/230/ volt, single phase

      Farmingdale, NY
    • Laguna, I|Flux: 5 Elite Dust

      Laguna, I|Flux: 5 Elite Dust Collector

      • Manufacturer: Laguna

      The machining of MDF, Melpomene, Painted Panels, and other man made material creates a very fine and harmful dust to the surrounding operators. For the dust collector it is even worse; the filters get clogged and...

      Dundee, NY
    • MAGUIRE WSB-140 – 4-Compoment Gravimetric

      MAGUIRE WSB-140 – 4-Compoment Gravimetric Material Blender – New 1999

      • Manufacturer: Maguire

      MAGUIRE WSB-140 – 4-Compoment Gravimetric Material Blender – New 1999 Up to 450 lbs./hour 115 volts Maguire Controls Excellent Condition – tested and runs great – Has pneumatic mixing motor.

      Rockville Centre, NY
    2324252627

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.