Used loading in New Jersey, USA

2005 MULLER FTHSM 301

• Manufacturer: Muller

Used Muller model FTHSM 301 stainless steel drum lifter/blender. Suitable for blending, lifting, inverting and swiveling different type of barrels. Total height of column is 3400 mm, maximal lifting height (clamp...

1250 gal ward tank 304 stainless steel reactor

• Manufacturer: Ward Tank

Used 1250 Gallon 304 Stainless Steel Jacketed Mix Tank/Reactor. Manufactured by Ward Tank & Heat Exchanger Corp. Internal rated FV/75 psi @ 500°F. Jacket rated 90 psi @ 400°F. Equipped with Chemineer Agitator, Mo...

Feeder Dynamics 30" Bowl Feeder #16819

• Manufacturer: Feeder Dynamics

30" diameter vibratory bowl feeder by feeder dynamics. Unit is housed in sound insulated cabinet 41" x 40" with aluminum frame and polymer sides and fully insulated interior, dual side service doors, painted stee...

Accu Seal Corp 635/335 S/s #15887

• Manufacturer: Accu-Seal

All stainless steel table top vacuum bag sealer by accu seal corp, model 635/335 s/s, serial # 38794. Features all stainless steel pharmacuetical grade construction with polished finish, pneumatically operated se...

Stainless Steel 316 GEA Pharmadule MP2/3-K2-F1/2 Dryer-Fluid Bed - IPP# 233966

• Manufacturer: GEA

Documentation shows Mills but we did not get some of them. With spare product containers. (read below) 60 kg Explosion shock resistant fluid bed dryer. Designed for cGMP production, it is a contained system, and ...

PATTERSON-KELLEY 20 Cubic Foot

• Manufacturer: Patterson-Kelley
• Model: 20 CUBIC FOOT

Used Patterson Kelly 20 cubic foot stainless steel V-blender. On stand with 5 HP, 230/460 volt drive motor and intensifier bar 2 HP motor. Machine rated 65# per cubic foot. (2) 18" loading covers with (1) 8" disc...

2001 OLSA MACEF 150 PH/R

• Manufacturer: Olsa
• Model: MACEF 150 PHR

Used Olsa Model Macef 150 PH/R 316L Stainless Steel Vacuum Mixer Homogenizer 190 liter (50 US gallon) total capacity with maximum 150 litre (40 US gallon) and minimum 30 litre (8 US gallon) loading capacity Shell...

Stainless Steel Bowen Engineering Inc BE-1410 Dryer-Spray - IPP# 207376

• Manufacturer: Bowen Engineering Inc

pilot scale spray dryer system bottom 1- fluid nozzle atomization, mixed flow (counter current), chamber 800mm diameter x 1.8m straight side x 1m coned bottom, 500mm x 500mm access door Niro direct gas fired air ...

Stainless Steel 304 Mixer-Twin Shell & Double Cone - IPP# 238390

• Manufacturer: Gemco

with #4 finish for product contact, sanitary double cone blender, Rated for max. density 70 lbs./cu. ft., Rotation from drive side is clockwise, speed is 11.3 rpm. Agitator speed is 3300 rpm. With sanitary Gemcom...

Shanklin S 26 #17329

• Manufacturer: Shanklin

Shanklin l sealer model # s 26, serial # so 7017-01. Features 24" front seal and 21" cross seal in hot knife design with independant digital temperature controls, automatic sealing cycle and package discharge, mi...

Sergeant Packaging Item # 903118 #16158

• Manufacturer: Sergeant

Semi-automatic l-sealer/shrink tunnel by sergeant packaging system, item# 903118, serial # 85650, machine 110c combo 11 sys dig. Features 20" wide x 16" deep l sealing bar, moveable film craddle, rotary hole punc...

Feldmeier 800 Gallon Tank Open Top Tank #13397

• Manufacturer: Feldmeier

800 gallon open top partial jacketed tank by feldmeier equipment, serial # l-1786. Features dimple jacketed, insulated and fully shrouded body, 3/5 side wall is jacketed but is leaking (unable to repair), bottom ...

TENERGY CHRIST 17.9 Gallon/Min

• Manufacturer: Tenergy

Used 17.9 Gallon/Min Nanofiltration Skid System Skid consists of the following: - NF pressure vessels (2 off) - NF membranes (3 per vessel) - pump - 5 Micron cartridge filter - sodium bisulfite Dosing tank and pu...

Fire Cone Twin 2000 Aluminum Sweat Furnace

Runs on natural gas. Recently reduced! Fire Cone Twin 2000 Aluminum Sweat Furnace Model M2932A 1/8 hp 115V 60Hz Single phase Removable access door for easy servicing All internal controls and wiring installed Nat...

Stainless Steel 304 American Process Systems C060/6660 Dryer-Rotary Vacuum - IPP# 232737

• Manufacturer: American Process Systems

cylindrical design Vessel designed for 14.9 psi and full vacuum rated at 29.92” Hg. This machine is designed for continues operation but was previously used in a batch process. The jacket is two zone style with 3...