Processing » Japan

Search By Category

Search By Manufacturer

Search By Prefecture

Building Filters

230

Used separators in Japan

  • 2016 IHI HS-255L

    2016 IHI HS-255L

    • Manufacturer: IHI
    • Model: HS

    4000 rpm/3500 G Nominal capacity: 2.5–3.5 t/h Backdrive specification (can be modified to single-motor specification) Control panel included

    Hiroshima, Japan
  • 1973 Tomoe Kogyo P-3400

    1973 Tomoe Kogyo P-3400

    • Manufacturer: Tomoe kogyo

    30kW 4000rpm/3200G Gear ratio: 1/165 Spare rotor included (gear ratio: 1/52) Click here for a video of the test run (YouTube) after maintenance was completed.

    Hiroshima, Japan
  • 1989 Matsumoto Machinery Works MARK

    1989 Matsumoto Machinery Works MARK III 48 × 30

    • Manufacturer: Matsumoto Machinery Works

    Hydraulic drive (has been converted to motor drive) Capacity: 458L Rotation speed: 1080rpm 800G

    Hiroshima, Japan
  • Tanabe Willtech Z-2L (overflow type)

    Tanabe Willtech Z-2L (overflow type)

    • Manufacturer: Tanabe Willtech

    Main: 3600rpm/3000rpm BD: 3030rpm/2530rpm Differential speed: 10rpm/8.2rpm With spare screw Applications: Suitable for sludge dewatering.

    Hiroshima, Japan
  • Sato S-401G

    Sato S-401G

    • Manufacturer: Sato

    Bore diameter: 40mm Head: 11.5M Liquid flow rate: 110L/min

    Hiroshima, Japan
  • Kotobuki Industry S3-0

    Kotobuki Industry S3-0

    • Manufacturer: Kotobuki Industry

    22kw (explosion-proof motor) 1300～2200rpm 1300G 【Maintained Processing capacity: 5-10m3/H Serviced in 2014 -> In indoor storage Overlay thermal spraying is not performed. Please consult with us.

    Hiroshima, Japan
  • 2006 Kotobuki SC-170

    2006 Kotobuki SC-170

    • Manufacturer: Kotobuki

    Reference treatment volume 6m3(under the condition of sludge concentration 0.91% flocculant used) Maximum centrifugal effect 2000G(Rotation speed 3200min) Deceleration ratio 1/187 Differential speed range 3 to 10...

    Hiroshima, Japan
  • Tikara Engineering 60 × 25

    Tikara Engineering 60 × 25 1/2 type

    • Manufacturer: Tikara Engineering

    Main unit, scraping unit, hydraulic unit Capacity: 610L Rotation speed: 840(600G)~970RPM(800G) During scraping: 11RPM Without control panel and filter cloth. Please contact us for availability. We can provide you...

    Hiroshima, Japan
  • There is no nameplate 24

    There is no nameplate 24 吋

    • Manufacturer: No nameplate

    Basket SUS Casing SS + SUS (side) Upper discharge type The entire disassembly and maintenance is performed at our maintenance shop, so you can be assured of the finish of the mechanical parts as well as the exter...

    Hiroshima, Japan
  • A spiral pump

    A spiral pump

      Confirmation required. Note: No inventory number. (1) Place to put.

      Hiroshima, Japan
    • Nishikaki pump UFS

      Nishikaki pump UFS

      • Manufacturer: ニシガキポンプ

      Discharge rate: 0.05 m3 / min Power: 2.2kw | Material: Wetted SUS 304 | Quantity saved: One

      Hiroshima, Japan
    • 1979 HISAKA Manufacturing BFL 7

      1979 HISAKA Manufacturing BFL 7 - 2050

      • Manufacturer: 日阪製作所

      Motor: 11 kw Material: SUS 316 Bore size: 65 × 50 Head: 20M Flow rate: 0.5 m3 / min

      Hiroshima, Japan
    • 1991 Sanwa MFD

      1991 Sanwa MFD

      • Manufacturer: Sanwa

      SUS 1.5 kw suction / discharge: caliber 25/20 mm Discharge amount: 1 m 3 / h, head height: 15 m

      Hiroshima, Japan
    • Alfa Laval (DeLaval) SSG109

      Alfa Laval (DeLaval) SSG109

      • Manufacturer: アルファラバル(デラバル)

      3.7KW 200V 7900rpm Where to use: Chemical plants Food plants Feed and fertilizer plants Environmental recycling plants Water treatment plants | Throughput: 2.500L～5,000L/h | Sealed wetted parts: SUS Main body only

      Kure, Japan
    • 1999 Tanabe Wiltec O-24

      1999 Tanabe Wiltec O-24

      • Manufacturer: Tanabe Wiltech

      Top discharge type 24" Explosion-proof Rotation speed: 1,950 rpm Capacity: 40L

      Hiroshima, Japan
    • Mitsubishi SJ 6000 Centrifugal Separator

      Mitsubishi SJ 6000 Centrifugal Separator

      • Manufacturer: Mitsubishi
      • Model: SJ 6000

      Good condition Mitsubishi SJ 6000 Centrifugal Separators manufactured in 2010. Located in Japan and other countries. Click request price for more information.

      Japan
    45678

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.