Processing » Hiroshima

Building Filters

79

Used dimension in Hiroshima, Japan

  • 1990 NPK AF-30-15

    1990 NPK AF-30-15

    • Manufacturer: NPK

    Outer diameter dimension: 600 φ × 500 H Material powder contact area: SUS

    Hiroshima, Japan
  • 10000 L cylindrical vertical type

    10000 L cylindrical vertical type

      Flat top and bottom, Teflon coating inside Liquid removal: pressurized siphon type External dimensions: Ø1900×4000H

      Hiroshima, Japan
    • 90 L Upper flat bottom

      90 L Upper flat bottom corn

        Capacity: approx 90 liters Tank dimension: φ470 × 500 H (straight body part) Stirring motor: 0.75 kw

        Hiroshima, Japan
      • Tokuju Kosakusho V-200

        Tokuju Kosakusho V-200

        • Manufacturer: 徳寿工作所

        200L in stock / Total capacity 475L External dimensions: 2500 x 800 x 1950H (mm) Weight: approx. 700kg

        Hiroshima, Japan
      • 1999 Noritake NR-120A

        1999 Noritake NR-120A

        • Manufacturer: Noritake

        Ceramic roll Roll dimensions: φ120×450 Motor: 2.2kw Water-cooled, manual tightening Remarks One of three rolls is damaged. Need to replace with new parts.

        Hiroshima, Japan
      • Kurita Industry C-300

        Kurita Industry C-300

        • Manufacturer: Kurita Industry

        Specifications: Multiple disk type dehydrator Dimensions: 1190W x 2545L x 1859H Modules: Upper 4 modules, Lower 5 modules Reaction tanks: SUS 110 liter, 2 units with agitator

        Hiroshima, Japan
      • Makino F-101

        Makino F-101

        • Manufacturer: Makino

        Specifications:Fully automatic type converted to semi-automatic Filtration area: 14.5m2 Filtration volume: 200L Filtration plate dimensions: 650 x 650 x 18 chambers Filtration plate material: PP

        Hiroshima, Japan
      • no-image_en.png

        For Asano Works ST-52

        • Manufacturer: Asano Works

        Seven stages, parts Material: SUS | Quantity saved: One | Size: Outer dimensions: 835 x 835 x 640H 830 x 30 x 7 sections

        Hiroshima, Japan
      • 1000L SUS tank

        1000L SUS tank

          Total capacity about 1000L (based on straight-body dimensions). Bottom-curved shape, bottom drain type. *Because there is no data, exact capacity is unknown. With jacket (material SS / used with steam). Included ...

          Hiroshima, Japan
        • 2003 [Maeda Iron Works] Multi-tube

          2003 [Maeda Iron Works] Multi-tube heat exchanger

          • Manufacturer: 前田鉄工所

          This heat exchanger cools and condenses vapor generated by a vacuum concentrator (3000-4000 kg/hour evaporation rate). External dimensions: Approx. 1000mm diameter (excluding legs) x 4200mm high, Weight: Approx. ...

          Hiroshima, Japan
        • no-image_en.png

          2002 [Ohno Chemical Machinery] Cooker

          • Manufacturer: 大野化学機械

          Screw diameter: φ675 x 7355L Main body and screw internal pressure: 0.49 MPa (maximum operating pressure) Class 2 pressure vessel Diagrams available

          Hiroshima, Japan
        • 2007 Buhler SDV 1100

          2007 Buhler SDV 1100

          • Manufacturer: ビューラー

          Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...

          Hiroshima, Japan
        • Hata Ironworks HU-RG

          Hata Ironworks HU-RG

          • Manufacturer: Hata Ironworks

          Main electric motor 0.75㎾ Built-in motor with stepless speed change Main unit weight: approx. 180 kg This is a dry type granulator that crushes tablets and other solids to make them into dependable granules. This...

          Kure, Japan
        • clean room (e.g. in semiconductor

          clean room (e.g. in semiconductor manufacturing)

          • Manufacturer: Pioneer Wind Turbine

          Dimensions:1500L x 800W Indoor:800 square Where to use: Chemical factory Food factory Feed and fertilizer factory Environmental recycling factory | Formal name: Clean Room Duster | Unidirectional type number of s...

          Kure, Japan
        • 2000 Kansu Kosan㈱ T-6

          2000 Kansu Kosan㈱ T-6

          • Manufacturer: Kansu Kosan Co., Ltd.

          Total volume: 6000L Diameter: 2000φ × 2250H (excluding leg dimensions) There is a trace of stirrer installation Stirrer shortage

          Kure, Japan
        23456

        Overview

        Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

        FAQ

        What should I consider when buying used processing equipment?

        Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

        How do I arrange shipping for processing equipment?

        Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

        What is the typical maintenance for processing equipment?

        Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.