Processing » Hiroshima

Search By Category

Search By Manufacturer

Building Filters

634

Used Processing in Hiroshima, Japan

  • ［Toshiba] Motor 5.5kw4p200V

    ［Toshiba] Motor 5.5kw4p200V

    • Manufacturer: Toshiba

    Unused General-purpose motors Power: 5.5kw4p200V | Quantity saved: One

    Hiroshima, Japan
  • ［TOSHIBA] Motor 2.2kw2p200V

    ［TOSHIBA] Motor 2.2kw2p200V

    • Manufacturer: Toshiba

    Unused General-purpose motors Power: 2.2kw2p200V | Material: One

    Hiroshima, Japan
  • ［Mitsubishi] Motor

    ［Mitsubishi] Motor

    • Manufacturer: Mitsubishi

    With bevel gears Power: 5.5Kw4P200V | Material: SS | Quantity saved: １

    Hiroshima, Japan
  • Geared motor

    Geared motor

    • Manufacturer: Daiichi Bussan Co.

    Reduction ratio 1/43 Power: 37Kw200V | Material: SS | Quantity saved: 1

    Hiroshima, Japan
  • ［Sumitomo] Motor with Bayer cyclo

    ［Sumitomo] Motor with Bayer cyclo reducer

    • Manufacturer: Sumitomo

    Reduction ratio 1/59 Power: 3.7Kw4P400V | Material: SS | Quantity saved: 1

    Hiroshima, Japan
  • Sumitomo Heavy Industries HM3-21813A-AV

    Sumitomo Heavy Industries HM3-21813A-AV

    • Manufacturer: Sumitomo Heavy Industries

    2.2kw/4P/200V RATIO:319 Power: 2.2kw/4P/200V | Quantity saved: One

    Hiroshima, Japan
  • 1996 Tanabe Wiltech DAC-42

    1996 Tanabe Wiltech DAC-42

    • Manufacturer: タナベウィルテック

    Explosion-proof, 42" fully automatic bottom discharge.

    Hiroshima, Japan
  • 1995 Sanko Machinery SAM-MC101-RC+AF-4TC

    1995 Sanko Machinery SAM-MC101-RC+AF-4TC

    • Manufacturer: Sanko Machinery

    Voltage: 200V 60Hz Heater: 180 x 4 Includes six different types of measuring cups. No instructions or diagrams.

    Kure, Japan
  • 2010 Silo

    2010 Silo

      Total volume: 30m3 Diameter: 2900φ×5850H Drawings available

      Kure, Japan
    • 2008 Izumi Food Machinery NPW30F06-042-6-H

      2008 Izumi Food Machinery NPW30F06-042-6-H type

      • Manufacturer: Izumi

      Tubes in shell-and-tube heat exchanger replaced by All welded plate & tube heat exchangers Shell and tube heat exchanger Material is under investigation

      Kure, Japan
    • Alfa Laval SSG509

      Alfa Laval SSG509

      • Manufacturer: Alfa-Laval

      Power: 3.7KW 200V Rotation speed: 1800rpm Where to use: Chemical plants Food plants Feed and fertilizer plants Environmental recycling plants Water treatment plants | Throughput: 2.500L～5,000L/h | Wet part: SUS M...

      Kure, Japan
    • 2000 Nippon Carbon Special BZ661MCN1S8

      2000 Nippon Carbon Special BZ661MCN1S8

      • Manufacturer: Made in Japan Carbon

      Where to use: Chemical factory | Heat transfer area: 23.3m2 | Design pressure: FV to 2kPaG | Design temperature: 150℃

      Kure, Japan
    • Showa Kakoki TA5570

      Showa Kakoki TA5570

      • Manufacturer: Showa Kakoki

      Where to use: Chemical plant Food plant Feed and fertilizer plant Environmental recycling plant Crushed stone plant Water treatment plant | Whole picture: 1500L SUS304 | Cylindrical vertical thickness: 5mm

      Kure, Japan
    • Amakasu Kosan R-1

      Amakasu Kosan R-1

      • Manufacturer: Amakasu Kosan

      2100φ×2550H Where to use: Chemical plant Food plant Feed and fertilizer plant Environmental recycling plant Crushed stone plant Water treatment plant | Whole picture: 6000L SUS

      Kure, Japan
    • 2000 Amakasu Kosan T-8

      2000 Amakasu Kosan T-8

      • Manufacturer: Amakasu Kosan

      Made of SUS 2300φ×2650H Where to use: Chemical plant Food plant Feed and fertilizer plant Environmental recycling plant Crushed stone plant Water treatment plant | Whole picture: 7000L Storage tank

      Kure, Japan
    3334353637

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.