Building Filters

8000L Cylindrical vertical
With a warp & heaters for thermal insulation Barrel part: about 2000 φ × 3000 H Outdoor BOX with temperature control board (not inspected)
Hiroshima, Japan
2006 Paulec SFP-10
- Manufacturer: Powrex
Explosion-proof specifications With hot air generator, dust collector, control panel Container capacity: Approx. 21 L (total volume)
Hiroshima, Japan
2001 Irie Shokai PBV-1000
- Manufacturer: 入江商会
Total capacity 1L / Finishing capacity 0.7L Rotation speed 15-35 rpm Heater (temperature control)
Hiroshima, Japan
2007 Koyo Thermo System MB-181824
- Manufacturer: 光洋サーモシステム
Maximum service temperature: 1100 ° C Common service temperature: 600 to 1000 ° C Temperature adjustment operation: PDI control with auto-tuning
Hiroshima, Japan
1988 Tanabe AUT - 42
- Manufacturer: Tanabe
42" SUS316 Fully automatic bottom discharge type, hydraulically driven. No control panel. Hydraulic drive has been converted to motor drive.
Hiroshima, Japan
2016 IHI HS-255L
- Manufacturer: IHI
- Model: HS
4000 rpm/3500 G Nominal capacity: 2.5–3.5 t/h Backdrive specification (can be modified to single-motor specification) Control panel included
Hiroshima, Japan
2017 Chikara Engineering HANG48×800
- Manufacturer: Tikara Engineering
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 796G Scraping device hydraulically driven With control panel
Hiroshima, Japan
Nippon Dryer HF-04
- Manufacturer: japan dryer
Overall dimensions: 2500 x 1100 x 1700H Internal dimensions: 1290 x 790 x 800H = approx. 800L Temperature control: up to 200°C
Hiroshima, Japan
Araki Iron Works SRG-490
- Manufacturer: 荒木鉄工
Motor: Dispersion 22Kw 4P200V (Explosion-proof) Agitation 7.5Kw Hydraulic 1.5Kw With hand control panel Remarks With inverter (2 pcs.)
Hiroshima, Japan
Tanabe Wiltec TOP-48-80
- Manufacturer: Tanabe Wiltech
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 800G Scraping device air-driven With control panel (without regenerative resistor)
Hiroshima, Japan
2007 Sumiyoshi Heavy Industries SJ - 050
- Manufacturer: Sumiyoshi heavy industry
Working pressure: -80kPa Dry capacity: 500 liters Shaft speed: 11rpm (MAX) Stirring motor: 5.5kw Accessory: Control panel, water-sealed vacuum pump, cooling tower
Hiroshima, Japan
2004 Hitachi Zosen TFAP-10-18MKII
- Manufacturer: Hitachi
Fully automatic compression type 1000mm x 18 chambers Unmaintained, but in fairly good condition Complete books and control panel available Filtration area: 26.6 m2 Filtration volume: 306 L
Hiroshima, Japan
Sugiyama Heavy Industries UA-160S
- Manufacturer: 杉山重工
High-speed mixer Mixing capacity: MAX 1250L, buffed on the inside Motor: Tilting vane 90kw/220V Chopper 30kw/220v Jacket Remarks No control panel, main unit only
Hiroshima, Japan
Yamato Seiki 300 liters
- Manufacturer: Yamato
Motor: 11kw Vessel capacity: 300L (Vessel fixed type) Wetted part material: SUS with jacket Vacuum specification Remarks No control panel and vacuum pump. *Exhaust 2500L Large trestle is attached, but it can be r...
Hiroshima, Japan
2008 Makino BM-4000LDFJ-A-370MJR-V
- Manufacturer: マキノ
Capacity: 4000L Inverter speed change system Specifications/drawings available Control panel available Lining: Alumina porcelain brick Rotation speed during crushing:25±5r/min Rotation speed during discharge:15±5...
Hiroshima, Japan
