Processing » Germany

Search By Category

Search By Manufacturer

Search By State

Building Filters

153

Used cleaning technology in Germany

  • STO - Jet technology Oberberg

    STO - Jet technology Oberberg SMS 750

    • Manufacturer: STO - Strahltechnik Oberberg

    Sifting width 750 mm, 2 permanent magnetic rollers, diameter Ø 219/324 mm, worm gearbox, drive power 2x 0.75 kW, cascade wind sifting, housing made of welded stainless steel construction, required extraction capa...

    Meinerzhagen, Germany
  • 2011 KELLER Air Technology CABIN-STAR-Detustering

    2011 KELLER Air Technology CABIN-STAR-Detustering Cell

    • Manufacturer: Keller

    Soundproof wall/ceiling elements, exhaust air filter type VARIO/EZV 2.3-S11-B30-V, volume flow approx. 10,000 m³/h, rigid filter elements, dust collection funnel, disposal container, integrated fan, drive power 1...

    Meinerzhagen, Germany
  • 2015 OTI Surface Technology IG-1500

    2015 OTI Surface Technology IG-1500

    • Manufacturer: OTI

    Suitable for derusting, paint stripping & deburring, vacuum blast cabinet, working area approx. 1500 x 900 x 1000 mm, gloves, compressed air & abrasive hose, foot pedal switch

    Meinerzhagen, Germany
  • 2019 STO - Beam Technology

    2019 STO - Beam Technology Oberberg BT 5

    • Manufacturer: BT

    Turntable Ø 700 mm, batch max. 25 kg / 620 mm high, 1 BHT blast turbine, blast wheel Ø 300 mm, drive power 7.5 kW, discharge speed 75-80 m/s, abrasive throughput approx. 120 kg/min, control system, pre-separator,...

    Meinerzhagen, Germany
  • HPS Filter Technology Jet VK

    HPS Filter Technology Jet VK

    • Manufacturer: HPS

    Volume flow approx. 4,000 m³/h, cartridge filter, 6 filter elements type 15F/12, filter area approx. 100 m², dust collection funnel, fan, SIEMENS drive motor, drive power 4 kW, cleaning, control system

    Meinerzhagen, Germany
  • Trusted Seller
    LC-T1 cleaning unit (top) with

    LC-T1 cleaning unit (top) with power channel

    • Manufacturer: Wood IQ Lohmeyer

    The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistat...

    Blomberg, Germany
  • 2008 KELLER Air Technology 2.1

    2008 KELLER Air Technology 2.1

    • Manufacturer: Keller
    • Model: Vario

    Volume flow approx. 3,300 m³/h, rigid body filter, 8 filter elements, filter surface 30 m², dust collection funnel with disposal container, fan type MBE 050 00453.03, drive power 5.5 kW, compressed air cleaning

    Meinerzhagen, Germany
  • 2008 KELLER Air Technology Jet-Set

    2008 KELLER Air Technology Jet-Set 227/63

    • Manufacturer: Keller

    Air volume 20000 m³/h, 126 filter bags, filter area 189 m², centrifugal extraction fan, drive power 37 kW, automatic jet cleaning, dust collection hopper with rotary valve, big bag discharge, control unit, silenc...

    Meinerzhagen, Germany
  • 2006 KELLER air technology 2.3

    2006 KELLER air technology 2.3 S12 ZS

    • Manufacturer: Keller
    • Model: Vario

    Volume flow approx. 6,000 m³/h, rigid body filter, 12 filter elements, filter surface 45 m², dust collection funnel, rotary valve, integrated fan, drive power 11 kW, cleaning, differential pressure gauge, control...

    Meinerzhagen, Germany
  • 2019 HERDING Filtration Technology DELTA2

    2019 HERDING Filtration Technology DELTA2 FLEX 2250-96/9 GZ

    • Manufacturer: HERDING Filtertechnik

    Air volume 50000 m³/h, 96 sinter-plate filter elements, filter area 684 m², 2 integrated extraction fans, drive power 55 kW, automatic cleaning, 2 dust collection hoppers with rotary valve, control unit, chimney,...

    Meinerzhagen, Germany
  • Christ CIP/SIP cleaning system in

    Christ CIP/SIP cleaning system in stainless steel frame design

    • Manufacturer: SIP

    This CIP/SIP cleaning system in stainless steel frame design is a fully automatic, validatable solution for the pharmaceutical industry. Equipped with high-quality components from KPA (centrifugal pump), Endress+...

    Grenzach-Wyhlen, Germany
  • Trusted Seller
    Mixing technology Hoffmann & Partner

    Mixing technology Hoffmann & Partner RWH 200/VA/VA/FU

    • Manufacturer: Hoffmann

    Planetary mixer RWH 200 - mixing system mixer agitator as good as new with PLC control and monitor visualization No.: 6150 ; Year: 2008 Condition. As good as new Drive with gear motor 11 kW 104 rpm Siemens PLC Vi...

    Riesa, Germany
  • 1998 KREISEL Environmental Technology JET

    1998 KREISEL Environmental Technology JET Hose Filter KJSW 20/04 - 40.1/42

    • Manufacturer: KREISEL Umwelttechnik

    Air volume 30000 m³/h, filter area 338 m², pre-separator, radial extraction fan 55 kW, automatic jet cleaning, dust collection hopper with discharge screw conveyor, big bag discharge, rotary valve, control system...

    Meinerzhagen, Germany
  • 2011 KELLER Air Technology EZV

    2011 KELLER Air Technology EZV 2.3-S11-B30-V 11,0/400/50

    • Manufacturer: Keller
    • Model: Vario

    Volume flow approx. 10,000 m³/h, rigid filter elements, dust collection funnel, disposal container, integrated fan, drive power 11 kW, cleaning, control system

    Meinerzhagen, Germany
  • Trusted Seller
    Brush/Brush Segment from Tennant –

    Brush/Brush Segment from Tennant – 14967 Disco 20″ 27074

    • Manufacturer: Tennant

    Brush segment Quick Snap, brush, plastic brush, nylon brush

    Wiefelstede, Germany
12345

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.