Used containers in Germany

500 Liter Container, Aisi 304

remarks: Foot frame, Fe (galvanized; 1 screwed plastic plate at the end of the feet; see photos); Type plates are not available on every container; Manhole cover without fastening screws; in the middle with 1 con...

1000 Liter Container, Aisi 304

• Manufacturer: Stöcklin

remarks: Frame, Fe (galvanized); diameter of manhole approx. 420 mm; 1 container with slight differences in design; this container has dents in the lower part of the container (see photos); last medium for this c...

1950 liter container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: frame, Fe (galvanized); some dents on the containers; partly the clamping rings of the manholes and the outlet valve are made of Fe; Alternatively, the containers are also available from us made of alumi...

1251 liter container, Aisi 304

• Manufacturer: Behälter KG Bremen

remarks: Frame, Fe (galvanized); hand hole diameter approx. 210 mm; 1 container is missing the manhole cover, 2 containers are missing the handhole cover (usually the associated clamping rings are also missing); ...

560 liter container, Aisi 304

• Manufacturer: Behälter KG Bremen

remarks: Frame, Fe (galvanized); Hand hole diameter approx. 210 mm (in the case of 1 container the hand hole cover is missing; this container also with stronger dents (see photos)); Ball valves very stiff (possib...

800 Liter Container, Aisi 316

remarks: Diameter of manhole approx. 385 mm; slight differences in design; 1 container with a type plate (hard to read) and with outlet, pipe diameter inside approx. 35 mm (this container has a smaller dent in th...

800 liter container, Aisi 304

remarks: Container with dents; Bent hand lever of the outlet valve on 1 container

1050 Liter Container, Aisi 304

• Manufacturer: Thyssen Umformtechnik (UCON)

remarks: Container bolted to a drive-under frame made of Fe (galvanized); butterfly valve very stiff (possibly defective); stacking support at the top partially slightly bent; container with small dents

950 liter container, Aisi 304

remarks: Frame, Aisi 304; dents in the containers possible; Screw connections of the manhole cover are partially incomplete (the manhole cover is missing on one container); Hand levers of the butterfly valves are...

1000 Liter Container, Aisi 316

• Manufacturer: Stöcklin

remarks: Frame, Fe (galvanized); diameter of manhole approx. 420 m; slight differences in design (e.g. manhole cover); in 1 container the upper bottom is slightly pressed in, the other container has a dent in the...

1000 liter container, Aisi 316

• Manufacturer: BSI Biemont Soneco Industries

remarks: Frame, Aisi 304; Manhole diameter approx. 505 mm; 1 small part of the containers is slightly higher with a total height of approx. 1,720 mm; smaller dents in the lower bottom; Outlets slightly pressed in...

800 liter container, Aisi 304

remarks: Frame, Aisi 304 (partially bent struts); Type plates not available on all containers; 1 welded bracket each in the manhole collar inside (see photos); Suspensions of the manhole cover partially incomplet...

1000 liter Container, Aisi 304

remarks: Foot frame, Fe (galvanized); wall height approx. 720 mm; Diameter manhole approx. 385 mm (the suspension of the manhole covers are no longer completely complete); Outlet diameter of pipe inside: 3 x 20 m...

550 liter container, Aisi 304

remarks: Manhole diameter approx. 410 mm; Container partially with dents

1000 liter container, Aisi 316

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: one of the containers has an additional outlet (25mm) with a butterfly valve in the cylinder (see photo)