Processing » Germany

Search By Category

Search By Manufacturer

Search By State

Building Filters

614

Used control unit in Germany

  • Trusted Seller
    Festo 542221 proportional pressure regulator

    Festo 542221 proportional pressure regulator VPPM-6TA-L-1-F-0L6H

    • Manufacturer: Festo

    The Festo VPPM-6TA-L-1-F-0L6H proportional pressure regulator enables precise, pilot-controlled pressure regulation in pneumatic systems, offering output pressures between 0.06 and 6 bar at a maximum flow rate of...

    $372 USD
    Borken, Germany
  • Trusted Seller
    Interroll roller conveyor with 24

    Interroll roller conveyor with 24 V drive roller conveyor 1700 mm rollers 500 mm

    • Manufacturer: Interroll

    The 24-volt roller conveyor, with the aid of a control system, enables the zero-pressure accumulation transport of unit loads. Each zone is driven by a RollerDrive, which is connected to a fixed number of idler r...

    $1,482 USD
    Borken, Germany
  • 2004 INDUCTOTHERM VIP Dual-Trak 750

    2004 INDUCTOTHERM VIP Dual-Trak 750 CR

    • Manufacturer: Inductotherm

    Capacity 2x 750 kg Al, rated temperature max. 780 °C, three-phase oil transformer, 750 kW, 865 kVA converter, pump station, water recooling system, hydraulic units, control panels

    Meinerzhagen, Germany
  • Trusted Seller
    CONTINENTAL 9200/1200 conveyors and conveyor

    CONTINENTAL 9200/1200 conveyors and conveyor belt systems

    • Manufacturer: Continental

    Stationary Conveyor belts and conveyor belt systems 1 piece stationary conveyor belt General system data: Fixed data Belt width 1200 mm Center distance app. 9200 m Difference in height app. -8 m Max. angle of inc...

    Ludwigsfelde, Germany
  • Trusted Seller
    UHLMANN SIMTAP 2.1 Deticated Feeder

    UHLMANN SIMTAP 2.1 Deticated Feeder tablets/capsules

    • Manufacturer: Uhlmann

    Dedicated feeder for any tablets or capsules on blistering machines f.e. Uhlmann UPS 1070• intermittent motion• for diverse product shapes• 60 strokes/min• format area max. 295 x 285 mm• own control unit, therefo...

    Stapelfeld, Germany
  • 1991 LAEMPE core-shosing machine L-10

    1991 LAEMPE core-shosing machine L-10 HB

    • Manufacturer: Laempe / Röperwerk

    Four-column machine, shooting volume 10 l, horizontal/vertical core box divider, clamping & separating device, electric heating plates, discharge carriage, gassing carriage, hydraulic unit, safety cabin, sand hop...

    Meinerzhagen, Germany
  • Trusted Seller
    Auction
    2007 plastic injection molding machine

    2007 plastic injection molding machine (KM 1) ARBURG Allrounder Selecta 270-S250-60

    • Manufacturer: Arburg
    • Model: Allrounder 270

    Clamping force: 25 t, machine weight: 1,900 kg, drive power: 35 kW, control unit, MORETTO granulate feeder, MORETTO D3.T granulator dryer, year of manufacture: 2007

    Lauchringen, Germany
    Visit Auction Website
  • 1985 LUEBER MS 03

    1985 LUEBER MS 03

    • Manufacturer: Lüber

    Rotary movement: 360° (divided into 15° steps), drive power 0.75 kW / 2,845 rpm, swivel movement: 2 x 110° (divided into 15° steps), drive power 0.37 kW / 1,450 rpm, control unit

    Meinerzhagen, Germany
  • VENTI Olde Cartridge Jet Filter

    VENTI Olde Cartridge Jet Filter VPJ 9-10

    • Manufacturer: VENTI OLDE

    Volume flow 10000 m³/h, cartridge filter, 9 filter elements, filter area 90 m², total pressure difference 29 mbar, dust collection funnel with disposal container, fan 15 kW, compressed air cleaning, control unit

    Meinerzhagen, Germany
  • 1978 VOGEL & SCHEMMANN KSM

    1978 VOGEL & SCHEMMANN KSM 6.10.02

    • Manufacturer: Vogel

    Four-column machine, shooting volume 10 l, core box max. 510 x 450 x 450 mm / ___ kg, clamping/separating device, discharge carriage with lifting device, gas flushing plate, vibrating conveyor chute, control unit

    Meinerzhagen, Germany
  • Trusted Seller
    ECONO-PAK Folding box cartoner FA-KT

    ECONO-PAK Folding box cartoner FA-KT

    • Manufacturer: Econo-Pak

    Including: - 1-head folding carton erector WVE-DR-R Hotmelt (2 adhesive patches) - Angle seamer - SIMATIC OP7 HMI - Nordson Hotmelt 3400V-2GAV4D/R Hot melt unit incl. hand glue gun - Manual control unit - Videoje...

    Leipzig, Germany
  • Trusted Seller
    Auction
    2014 plastic injection molding machine

    2014 plastic injection molding machine (KM 13) DEMAG Ergotech System 2000-840

    • Manufacturer: Demag
    • Model: Ergotech

    clamping force: 200 to, control ErgoControl, machine weight: approx. 10,000 kg, granulate feed unit MORETTO F5 F40, year of manufacture: 2014, serial No.: 1412203, power: 1 kW

    Lauchringen, Germany
    Visit Auction Website
  • Trusted Seller
    Auction
    Injection molding machine Netstal Syn

    Injection molding machine Netstal Syn Energie 1500K-230

    • Manufacturer: Netstal

    1.499.020; closing force 1500kN, closing force 182 kN, opening stroke 0-450mm, mold height 250-550 mm, screw diameter 35mm, operating hours on the pump approx. 36'000h... without conveyor belts/bunker, without te...

    Burgdorf, Germany
    Visit Auction Website
  • 2012 VENTI OIL CARTRIDGE JET

    2012 VENTI OIL CARTRIDGE JET FILTER VPJ 12-10

    • Manufacturer: Venti Oelde

    Volume flow 10200 m³/h, cartridge filter, 12 filter elements, filter surface 120 m², total pressure difference 23 mbar, dust collection funnel with disposal container, fan 15 kW, compressed air cleaning, control ...

    Meinerzhagen, Germany
  • 2017 MICHENFELDER Electrical Engineering MICOMP

    2017 MICHENFELDER Electrical Engineering MICOMP 5 Type G-CH

    • Manufacturer: Michenfelder Elektrotechnik

    Process control and evaluation unit, sheet steel housing with viewing window, pre-moisture measurement (used sand feed belt), rod electrode with temperature sensor, electrode holder, moisture measuring probe type...

    Meinerzhagen, Germany
1112131415

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.