Used pumps in Emilia-Romagna, Italy

I.mec epo-fd elettropompa orizzontale aspirazione frontale trasmissione diretta

• Manufacturer: I.mec

Horizontal direct centrifugal pumps model EPO-FD are specially constructed for transferring highly abrasive liquids such as: ceramic slips, glazes, dirty water with suspended solids, slurry, sand, grit, scales fr...

I.mec epo-id elettropompa orizzontale aspirazione inversa trasmissione diretta

• Manufacturer: I.mec

Horizontal direct centrifugal pumps with reverse suction, model EPO-ID are specially constructed for transferring highly abrasive liquids such as: ceramic slips, glazes, dirty water with suspended solids, slurry,...

I.mec epo-it pompa orizzontale aspirazione inversa trasmissione a cinghia

• Manufacturer: I.mec

Horizontal direct centrifugal pumps with reverse suction, model EPO-ID are specially constructed for transferring highly abrasive liquids such as: ceramic slips, glazes, dirty water with suspended solids, slurry,...

I.mec pompe verticali centrifughe

• Manufacturer: I.mec

Suitable for conveying high-density, abrasive and corrosive liquids even with suspended solids by centrifugal pumping action. Applications: Particularly suitable: in ceramics along glazing lines for feeding bells...

I.mec pmpe- pompe per esterni

• Manufacturer: I.mec

Model | Dimensions A/B/C/E/F/L mm Sizes | HP | speed | Flow rate It/min . kg/min Delivery Caudal MD65 PE | 151/576/50/220.5/994/(1 1/4") | 0.5/1 | 1400 | 60/100 MD85 PE | 157/576/50/319/1019/(1 1/2") | 1.5/2.5 | ...

I.mec flojet

• Manufacturer: Flojet

Brand | Pipe Size " Dimensiones " | prtata - delivery - caudal MAX lt/min FLOJET | 3/8" | 22.7

I.mec sand piper e wilden

• Manufacturer: Wilden

Brand | Pipe Size " Dimensiones " | prtata - delivery - caudal MAX lt/min SANDPIPER | 3/8" | 35 e | 1/2" | 52 WILDEN | 1" | 170 1,2" | 400 2" | 640 3" | 900

2020 VER5302 – Complete Sludge Dewatering line

• Manufacturer: Hiller

Complete sludge dewatering line Technical data decanter: Preparation capacity polymer unit: 1000 l/h from 0,1% to 0,5% solution Capacity polyer preparation pump: 60 – 1200 l/h Sludge parameter:

1998 Sulzer Z-V50T-2

• Manufacturer: Sulzer

Capacity: 30.000 l/min | Prevalence: 18 m

VER4667 – 2900 mm Board Machine

Installed in the ’60s Completely renewed in 1992 (replaced the side parts of the wet section, totally rebuilt the hood of the drying section, and added 6 dryer cylinders) Hood by Valmet Bono boiler 12 t/h, 10 bar...

1971 VER4578 – 2680 mm Beloit Tissue Machine, 65 tpd

• Manufacturer: Beloit

DCS made by ABB Major rebuilds in 1984 (drying system) and 2004 (Yankee Cylinder) Scope of Supply: Valmet Yankee Cylinder installed NEW in 2004 (diameter 4580 mm) Suction press: 78 kN/m, blind press: 80 kN/m Gas ...

1998 VER5397 – 2750 MM CRESCENT FORMER TISSUE MACHINE

• Manufacturer: ACelli

8 40 0 m/min 4 to 23 GSM Capacity: 70 ton/day AC/ DC-440V) Napkins, Facials, Toilet and Kitchen Valmet , others Yankee Cylinder: CURRENTLY IN FULL PRODUCTION Video avaliable on request Rewinder Max. width: 2750 m...

1998 VER5396 – 2750 MM CRESCENT FORMER TISSUE MACHINE

• Manufacturer: ACelli

Hood Drive type: Siemens DC DCS: Siemens S7-400 Yankee Cylinder: CURRENTLY IN FULL PRODUCTION Video avaliable on request Rewinder:

I.mec mastello agitatore sirio

• Manufacturer: I.mec

Suitable for mixing and pumping medium and low density and viscosity liquids where the product is moved through pump recirculation. Applications: In ceramics along glazing lines and'particularly suitable for feed...