Processing » Connecticut

Search By Category

Search By Manufacturer

Building Filters

657

Used Processing in Connecticut, USA

  • Lafranchi L1STD.20.22 Unscrambler Manufactured 2005

    Lafranchi L1STD.20.22 Unscrambler Manufactured 2005 Container Sorting Machine

    • Manufacturer: LaFranchi

    Made in Italy Currently located in Tinidad Riggers are required Approx. Dimensions 20ft x 20ft Has never been utilized at our plant work to separate and organize all types of containers into various sizes and sha...

    Watertown, CT
  • Hytrol 12" Wide ESD x

    Hytrol 12" Wide ESD x 70' Long Conveyor System Adjustable Height, 3 Available

    • Manufacturer: Hytrol

    Hytrol 12" Wide ESD x 70' Long Conveyor System Adjustable Height, 3 AvailableMake: HytrolSerial No: 502677Condition: Used, Overall In Great Shape Red Pull Cable Emergency Pull Stop Powered By 208/230 Volt 3 Phase...

    Watertown, CT
  • Didion Rotary Reverberatory Melting Furnace

    Didion Rotary Reverberatory Melting Furnace Rotates 310° 14 Tons/day 30 Million BTU

    • Manufacturer: Didion

    30 Foot Didion Rotary Reverberatory Furnace Rotates 310 Degrees 14 Tons/Day 30 Million BTU 30 Foot Didion Rotary Reverbatory Furnace Unit Rotates 310 Degrees Of Full Circle During Melt Stages 30 ft. Long ...

    Watertown, CT
  • Delta Design Model 5770 1520

    Delta Design Model 5770 1520 Watt 120V 1Ph 19"W X 16"D Furnace W/Analog Control

    • Manufacturer: Delta

    Delta Design Model 5770 1520 Watt 120V 1Ph 19"W X 16"D Furnace W/Analog Control Stainless Steel Interior Analog Temperature Control Access Port 120 Volt 60 Hz 1Ph Asset In Good Overall Condition Delta Design Mode...

    Watertown, CT
  • Gardner Denver VS11A Variable Speed

    Gardner Denver VS11A Variable Speed Screw Air Compressor 15HP Low Hours!

    • Manufacturer: Gardner Denver

    Gardner Denver Variable Speed Screw Air Compressor 10/2006Has approx 2,500 hours of usage.15HP460 volt3 phase60 Hz11 Kilowatts125 PSIIP54 Control BoxAir Smart ControlVariable SpeedBase mountedTeao motorAir Cld wi...

    Watertown, CT
  • Donaldson Torit Division VS-550 208/230/460V

    Donaldson Torit Division VS-550 208/230/460V Dust Collector 4" Inlet and Outlet

    • Manufacturer: Donaldson / Torit / DCE
    • Model: VS-550

    Donaldson Torit Division VS-550 208/230/460V Dust Collector 4" Inlet and OutletMake: Donaldson Model: VS-550 Serial No: 218426Torit Division Condition: Used, Overall In Great ShapeIndustrial Dust Collector 4" Inl...

    Watertown, CT
  • Rapid Air 108S Controller Data

    Rapid Air 108S Controller Data Entry Touch Pad / Manual Set Up Keys

    • Manufacturer: RapidAir

    Rapid Air 108S Controller Data Entry Touch Pad / Manual Set Up Keys Make: Rapid AirModel: 108SSerial No: 10157Condition: Used, Overall In Great ShapeDigital Readout Data Entry / Mode Select / Manual & Set Up Keys...

    Watertown, CT
  • AirNet Equal Tee Dn 50-2"

    AirNet Equal Tee Dn 50-2" pn 2810 5005 00 Air Compressor Tube Angle Connection

    • Manufacturer: AirNet

    AirNet Equal Tee Dn 50-2" pn 2810 5005 00 Air Compressor Tube Angle ConnectionMake: AirNetModel: pn 2810 5005 00Condition: 50-2"Series: DN 50-2"Equal Tee 90 Degrees For 2 Inch Piping Threaded Clamping Ends Plasti...

    Watertown, CT
  • 18"W. x 10'L., Linova, Linova

    18"W. x 10'L., Linova, Linova magnetic conveyor 18" wide x 10 ' long inclined

      LINOVA MAGNETICS CONVEYOR Model No. B-20 Serial No. 61076 18 inch X 10 feet 50” High Inclined 45 Degrees Magnetic Gear-head motor 3 Phase Shown under power

      Thomaston, CT
    • 2022 Glass Tempering Furnace 1600x2800mm

      2022 Glass Tempering Furnace 1600x2800mm

      • Manufacturer: Smart Glass Equipment

      Glass tempering furnace with forced convection Condition: New Max glass size: 1600x2600mm, 2400x3600mm, 2400x4800 and 2800x5000 Glass thickness: 3-15 mm Working power: from 250 kW Glass types: Clear and tint...

      New Haven, CT
    • DESPATCH

      DESPATCH

      • Manufacturer: Despatch

      DOUBLE DOOR OPENING WITH PRESSURE LATCHES AT BOTH FRONT AND REAR. ROOF MOUNTED HEATING ELEMENT CHAMBER WITH CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUC...

      Tolland, CT
    • STEELMAN 666GTC-HT

      STEELMAN 666GTC-HT

      • Manufacturer: Steelman

      DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEAT IS SUPPLIED BY GAS BURNER (500,000 BTU/HR MAX) FIRING INTO REAR COMBUSTION CHAMBER. HEATED AIR ENTERS WORK AREA ...

      Tolland, CT
    • GM ENTERPRISES GM HVF 201-M

      GM ENTERPRISES GM HVF 201-M

      • Manufacturer: GM ENTERPRISES

      DOUBLE WALL HORIZONTAL LOAD WATER COOLED SHELL WITH LOCKING RING FRONT DOOR FOR 10 BAR OPERATION. INTERIOR HAS A MOLY HOT ZONE AND HEATING ELEMENTS. PUMPING SYSTEM INCLUDES MECHANICAL AND DIFFISION VACUUM PUMPS...

      Tolland, CT
    • NOBLE INDUSTRIAL FURNACE

      NOBLE INDUSTRIAL FURNACE

      • Manufacturer: Noble

      DIRECT GAS FIRED (2,400,000 BTU/HR MAX) CAR BOTTOM FURNACE WITH FRONT DOOR ATTACHED TO THE ROLL OUT CAR. INTERIOR IS LINED WITH LIGHT WEIGHT FIBER INSULATION. HEAT IS SUPPLIED BY (8) BURN...

      Tolland, CT
    • CI HAYES VMHT/R-24-24-36

      CI HAYES VMHT/R-24-24-36

      • Manufacturer: CI HAYES

      HORIZONTAL WATER COOLED FRONT LOAD CHAMBER WITH SLIDING FRONT DOOR. INTERNAL HAS COIL TYPE HEATING ELEMENTS AND REAR MOUNTED FAN. FURNACE IS MISSING A STOKES 212 (150 CFM) VACUUM PUMPS.

      Tolland, CT
    2324252627

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.