Used welding in Bremen, Germany

15000 liter tank, AISI304 with welded insulation jacket

notice: some residues of previous content, pipe end cut flush

25000 liter triple walled storage tanks AISI 316 with fully a welded insulation jacket

• Manufacturer: Behälterbau Bader GmbH

max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 70 °C Temperature control cylinder (dj): half-coil temperature control bottom (dj): half-coil manhole: in the cylinder (a...

Barriquand welded plate heat exchanger, made in stainless steel

• Manufacturer: Steriflow

Other: Exchange area: 4 (2 x 2) m² Side A: Volume: 9 liters Permissible operating pressure: 7 bar Permitted operating temperature: -40/+20° C Side B: Content: 29 liters Permissible operating pressure: 8 bar Permi...

Stainless steel container 50 cbm

• Manufacturer: Sielmann

Design: cylindrical, upright with lower inwardly curved conical base, concrete base and upper conical base. Propeller agitator installed diagonally in the cylinder below, 2.5 kW, 930 rpm. Insulation around the cy...

Stainless steel container 240 cbm

• Manufacturer: Sielmann

Design: Upright cylinder with inwardly curved lower base, sloped to the outlet. With a conical upper base. Propeller agitator installed at an angle in the cylinder below, 2.7 kW, 465/970 rpm. Insulation around th...

Stainless steel tank 147.5 cbm

• Manufacturer: Sielmann

Design: cylindrical standing on a concrete base with upper conical base and lower inwardly curved conical base. Propeller agitator in the cylinder at the bottom. Insulation around the cylinder, cover made of full...

11650 liter horizontal pressure-resistant storage tank made of stainless steel 316

• Manufacturer: INOX - MAURER AG

max. allowable working temperature: 200 °C Volume: 11.650 liter | Vacuum: 1,0 bar | Max. excess pressure: 2,0 bar | Stand type: welded suppert saddle | Manhole: on the tank | Outlet: available | Material in conta...

Stainless steel container 28 cbm

• Manufacturer: Sielmann

Design: cylindrical, upright with lower flat bottom, with 100 mm gradient to the outlet, concrete-supported, with upper conical bottom, propeller agitator installed diagonally in the cylinder, 2.5 kW, 930 rpm, in...

Stainless steel tank 51.4 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 5 feet, height-adjustable, with conical bottoms, propeller agitator in the cylinder below, 3.0 kW, 710 rpm, double jacket around 1/2 cylinder and lower bottom, for 3 bar, 143 °C, ...

Stainless steel container 30 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height-adjustable, with conical bottoms. Propeller agitator installed diagonally below the cylinder. Insulation around the cylinder and lower bottom, cover fully welded. C...

Stainless steel container 3.6 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 height-adjustable feet with curved bases. Inclined blade agitator eccentric from above, 0.5/2.2 kW, 240/480 rpm (single-blade for one tank, double-blade for one tank). Insulated...

Stainless steel container 15 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, height-adjustable, with conical bottoms, with anchor agitator centered from above, approx. 1.5 kW, approx. 25 rpm. Double jacket on the cylinder below for pressureless hea...

Mixing tank 3.9 cbm

• Manufacturer: Sielmann

Execution: cylindrical, upright on 3 feet, height-adjustable with upper conical bottom and lower eccentric conical bottom; grid agitator from above centered; 1.5/2.2 kW, 16/32 rpm. Half-pipe coil around cylinder ...

Stainless steel container 3 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, height-adjustable, with conical bases, Z-stirrer eccentric from above, 0.3/0.6 kW/14/28 rpm, heating/cooling pockets on the cylinder and lower base, designed for 4 bar ope...

Stainless steel container 1.5 cbm

• Manufacturer: Sielmann

Execution: cylindrical standing on 3 feet, height-adjustable with upper curved bottom and lower inward-curved bottom. Grid agitator from above, ca. 30 rpm. Double jacket around the cylinder for pressureless heati...