Used Processing in Bremen, Germany

630 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as sma...

3000 liter tank, Aisi 304

remarks: Upper tank part with slope; 1 manhole approx. 345 x 440 mm in the front bottom; walls slightly curved outwards (see photos)

800 Liter IBC-container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame Fe (galvanized; lacquered); according to the manufacturer, ADR test papers are available and, if required, can be requested there using the serial number

10500 liter pressure tank, Aisi 304

• Manufacturer: Bolz

max. allowable working temperature: 20 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents,various documents remarks: 1 stainless steel sheet inside in the lower bottom (see...

1100 liter tank, Aisi 304

remarks: Frame Fe, lacquered (corrosion); hand hole diameter approx. 300 mm

5100 liter Cip-tank, Aisi 304

• Manufacturer: Rieger

remarks: Diameter Manhole appr. 420 mm; 1 of the tanks with a spray ball, the end of the outlet cut off and a smaller dent in the upper cylinder area; with a total height of approx. 4.400 mm, this tank is also sl...

2740 Liter heat-/coolable tank, Aisi 316

max. allowable working temperature: 95 °C max. allowable working overpressure (dj): 2.5 bar max. allowable working temperature (dj): 95 °C Temperature control cylinder (dj): half-coil temperature control bottom (...

15000 liter heat-/coolable pressure tank, Aisi 304

• Manufacturer: Schmidding Werke

max. allowable working temperature: 25 °C max. allowable working overpressure (dj): 2.0 bar max. allowable working temperature (dj): 3 °C Temperature control cylinder (dj): half-coil remarks: Struts between the f...

19499 liter tank, Aisi 316

remarks: 3 loose bearing shells made of Fe (galvanized); 1 manhole appr. 300 x 395 mm in the front floor; reinforcement ring made of mild steel around the outside of the cylinder

80 liter tank, Aisi 316 with inner coating

notice: some residues of previous content, bump at the insulation jacket remarks: Tank with inner coating made of plastic (see photos); double outlet DN 25

5000 liter tank, Aisi 304

remarks: Manhole diameter approx. 390 mm; 1 overflow pipe and short pipes from external connections inside the tank (see photos); 2 height-adjustable screws of the feet are missing

280 liter heat-/coolable pressure tank, Aisi 316

• Manufacturer: Diessel

max. allowable working temperature: 130 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 130 °C Temperature control ...

1345 liter heat-/coolable pressure tank, Aisi 316

• Manufacturer: Kleiser und Lösch

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 16.0 bar max. allowable working temperature (dj): 200 °C Temperature control cylinder (dj): half-coil temperature control botto...

2750 liter heat-/coolable pressure tank, Aisi 316

• Manufacturer: Kleiser und Lösch

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 12.0 bar Temperature control cylinder (dj): half-coil temperature control bottom (dj): half-coil notice: manhole cover plated, ...

1345 liter heat-/coolable pressure tank, Aisi 316

• Manufacturer: Kleiser und Lösch

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 16.0 bar max. allowable working temperature (dj): 200 °C Temperature control cylinder (dj): half-coil temperature control botto...