Used roller in Bremen, Germany

1000 Liter tank, Aisi 316

• Manufacturer: Waldner

remarks: Tanks are slightly out of round due to their design; tanks with small (sometimes slightly larger) dents; some of the tank feet are pressed into the lower bottom; tank lids are made of plastic (2 containe...

310 liter insulated pressure tank, Aisi 316

remarks: Test pressure: 1.5 bar; Test temperature: 127 ° C .; 1 step on the outside of the tank; 1 head hole diameter 300 mm in the top bottom; 2 welded brackets inside; small dents in the insulation jacket

10000 liter tank, Aisi 304 with agitator flange

remarks: Slight differences in design, e.g. B. outlets; rectangular opening approx. 600 x 600 mm in the upper bottom; various small rust spots on the outside (see photos); 2 tanks with a dent in the cylinder; con...

16000 liter agitator tank, Aisi 304 with jet stream mixer

remarks: Manhole approx. 320 x 420 mm; 1 tanks with smaller dents, 2 tanks with strong dents (1 with small cracks in one of the dents); height-adjustable screws of the feet are partially missing agitator features...

100 liter mobile pressure tank, Aisi 316

max. allowable working temperature: 50 °C remarks: Loose stainless steel 304 chassis with 5 plastic castors; 1 hand hole diameter 125 mm in the top shelf; Small pressure marks in the cylinder; Dents in the transi...

13500 liter heat-/coolable agitator tank, Aisi 304 with propeller agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, bump at the insulation jacket, Functionality of the double jacket not che...

70800 liter storage tank, Aisi 304

• Manufacturer: Gross Apparatebau

remarks: manhole approx. 350 x 450 mm in the front bottom; one tank (9540-1) with a small dent under the wooden cradle, one tank (9540-2) without a nameplate, up to 4 additional identical tanks could be made avai...

5000 liter tank, Aisi 304

remarks: Diameter manhole upper bottom appr. 425 mm, manhole cylinder appr. 310 x 425 mm; small dents in the cylinder EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking ...

2003 PAGLIERANI SIMPLE A1-R gebrauchter Schneckenpacker (netto) für Ventilsäc...

• Manufacturer: Paglierani

We offer a Paglierani screw packer for valve bags that was previously used in a small mill. The machine has been functionally tested. The screw packer has a filling tube width of approximately 150 mm. The bag ch...

2000 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, Aisi 304; Tank with dents inside, tank lid bulging outwards (probably due to overpressure in the ...

800 liter container, Aisi 304

remarks: Frame, Aisi 304 (partially bent struts); Type plates not available on all containers; 1 welded bracket each in the manhole collar inside (see photos); Suspensions of the manhole cover partially incomplet...

6350 liter heat-/ coolable tank, Aisi 304

• Manufacturer: Becker Tanks

remarks: Thermoplate for heating/cooling on one of the two side walls (not on the other side wall); 1 manhole approx. 340 x 440 mm in the front bottom; small dents in the upper bottom; various fittings inside the...

5320 Liter pressure tank, Aisi 304

remarks: 1 manhole approx. 320 x 415 mm in the cylinder; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851; tanks were professionally cleaned and overhauled in 2024; brand new r...

Heat exchanger, stainless steel

• Manufacturer: GEA

Other: Room I:- max. all. work. pressure: -1/+5 bar- max. all. work. temperature: 135° C- volume: 10 LiterRaum II:- max. all. work. pressure: -1/+2 bar- max. all. work. temperature: 135° C- volume: 40 Liter1 heat...

25000 liter heat-/coolable tank, Aisi 304

• Manufacturer: ALFA-LAVAL

Temperature control cylinder (dj): double jacket notice: some residues of previous content, pipe end cut flush remarks: Double jacket around approx. 1.800 mm of the cylinder height; Manhole approx. 410 x 510 mm; ...