Building Filters
- Trusted Seller
Extractor wall for coating with pump
With pneumatic membran pump With spray gun Exhaust + adjustable suction cups
Amel, Belgium - Trusted SellerAmel, Belgium
- Trusted Seller
Vacuum bell jarr + pump for laboratory
- Manufacturer: DANTEC
Brand: DANTEC, type: FIS 669X, serial number: TSA 5043B171 For degassing of molten metals
Amel, Belgium - Trusted SellerAuction

Omia Wagner Paint Spray Booth Spray Wall with Paint Spray Pump
- Manufacturer: Wagner
Consisting of spray wall with filters and suction, Wagner airless paint spray pump in protective cabinet, control panel, trestles and tripods for painting work, can be dismantled by copper EXCLUDING 2x protrusion...
Deinze, BelgiumVisit Auction Website - Trusted Seller
Water press pump for lining spayer
- Manufacturer: GRUNFOS
With surge tank 100 l and control box Weight: ± 200 kg | Motor: 1,5 kW, 2900 rpm, 240/415 V | Pressure: up to 15 bar, 4 m³/h
Amel, Belgium - Trusted Seller

“GNC Verfahrenstechnik” Pipe heat exchangers Type DRW 80/125 + Eccentric worm pump "Netsch" Type Nemo
- Manufacturer: Netzsch
Double-walled pipes Suitable for cooling and/or heating Inlet DN 125 Outlet DN 80 1460/235 rpm Stainless steel pump housing with feed screw and bearing housing (hygiene version) 15 kW, SEW motor
Zwevegem, Belgium - Trusted Seller
Cooling generator AXIMA
Type: FKSL 15 Serial number: 49.0024599 Construction year: 2005 Weight: 610 kg Dimensions: length 2250 mm, width 950 mm, height 2200 mm Engine: 25 kW, 400 V, 50 Hz Cold water inlet: 21° C Cold water outlet: 15° C...
Amel, Belgium - Trusted Seller
1997 Cooling tower, open circuit EVAPCO
Type: ICT 4-94, serial number: 19708 In good condition Ventilator 1,5 kW (on the top) Water pump 3 hp, 220/380 V, 2830 rpm Box from galvanized sheet (rusted underneath) With heating resistor and frost protection ...
Amel, Belgium - Trusted Seller
1998 Induction furnace INDUCTOTHERM, 250 kg, 150 kW, 1000 Hz
- Manufacturer: Inductotherm
Dimensions: - control board: length 1900 mm, width 770 mm, height 2000 mm - furnace body: length 1600 mm, width 1400 mm, height 1400 mm - cooling system: length 2000 mm, width 1200 mm, height 850 mm One body with...
Amel, Belgium - Trusted Seller
2008 Cooling system for hydraulic oil, CE
- Manufacturer: SESINO
Oil pressure max. 35 bar Cooling fan ± 200 W Oil connections 1'' Cooling curve in attachment (screw pump)
Amel, Belgium - Trusted Seller
1996 Induction furnace ABB, 2 x 3 t, 250 Hz, Twin-Power
- Manufacturer: ABB
1 transformer, primary voltage 20.000 V, 2880 kVA (the power can be distributed arbitrary on the 2 body-coils,Twin-Power) Induction melting system consisting of: - 2 MF furnaces, 3 t each - converter desk 2450 kW...
Amel, Belgium - Trusted Seller
Cutter for test specimens (wet cutting)
Wet cutting With mobil protectiv cover With emergency stop With hand lever With hand vice
Amel, Belgium - Trusted Seller
Double arm screw mixer IMF 30 t/h (Alphaset), with fast loop
Consisting of: -Mixer : Brand: IMF outside 5400 mm x 1600 mm, h. 4200 mm, expanded arm Length second arm, screw length between axle 2000 mm - 1 vibrating table set up on 6 pneumatic cushions, outside 2100 mm x 14...
Amel, Belgium - Trusted Seller

RENOPOWER BD3-90-10-M-HD
- Manufacturer: RENOPOWER
Capacity [m³/min]: 0.452 | Pressure [bar]: 10 | Tension [v/ph/hz]: 230/1/50 | Engine: Electrical / 3 cyl 945 rpm | Remarks: Tank Cap. 90 Liter / Heavy Duty Cast Iron Pump | Weight [kg]: 103 | Power [kw]: 2.2 (hp...
Waregem, Belgium - Trusted Seller

Declining conveyor belt “GEA-CFS” Type DCC3200/650
- Manufacturer: CFS/Koppens
all stainless steel total dimensions: (l x w x h) : ± 2.900 x 1.250 x 2.500 mm mobile height of the flights 30 mm outfeed height ± 1.000 mm
Zwevegem, Belgium
