Building Filters
Lifting chains
1 set of 2 drop x 21 tonne x 6 metres with shortners . Buyer needs to have certified and will be sold as scrap on invoice. Don't miss out Inspection recommended
Wollongong, Australia
Lifting Chains
3 sets of 1 drop x 12.5 tonne. 1 x 4 metres length with shortener, 1 x 5 metres length with shorter and 1 x 8 metres length (with no shortener) Buyer needs to have certified and will be sold as scrap on invoice D...
Wollongong, Australia
Lifting Chains
2 sets of 2 drops x 13.8 tonnes x 7.5 metres shortners. Buyer need to have certified and will be sold as scrap on invoice Don't miss out Inspection recommended
Wollongong, Australia
Wollongong, Australia
Wollongong, Australia
Coniston, Australia- Trusted Seller
Kingaroy Engineering
Wovr status: WOVR N/A | Incident type: Not Applicable | Compliance date: No C/P | Hour meter (showing on): 849 hr | Owners manual: None | Fuel: Diesel | Cylinders: 4 | Registration: No Registration | Gst status:...
Wagga Wagga, Australia 
Schiess Vertical borer turntable
- Manufacturer: Schiess Froriep
Turn table off vertical borer, 4.5 diameter, reduced to 3.4m for transport. Has Reduction box and motor, Heavy duty 50 horse power with reduction drive, 24 to 1 speed ratio, to be installed *Crane required to loa...
Wollongong, Australia
Wollongong, Australia
Lifting chains
2 sets of 2 drop x 21 tonnes by 8.5 metres with shortners. Buyer needs to have certified and will be sold as scrap on invoice Don't miss out Inspection recommended
Wollongong, Australia
angle plates
Heavy-duty angle plates fabricated 4 m high x 1 m wide with steps to get to the top *Crane required to load at buyer expense Don't miss out Inspection recommended
Wollongong, Australia- Trusted Seller
Fryma Processing Vessel
- Manufacturer: Fryma
- Model: VME-500
Processing Vessel, “FRYMA” model VME500, 300L min capacity and 750L max capacity, size: 1000mm dia x 1000mm deep, Steam Jacket with DT: 140 degrees and DP:250kpa, internal Vessel is Vacuum rated, dished bottom wi...
Sydney, Australia - Trusted Seller
FOXBORO FLOW CONTROLLER, MODEL - 45AP-FA45C
- Manufacturer: Foxboro
Used Foxboro Flow Controller, Model 45AP-FA45C. This process control device is designed to regulate and maintain precise flow rates of liquids or gases in industrial systems. Ideal for applications in industries...
Agnes, Australia - Trusted Seller
TIDELAND 530.1255
- Manufacturer: TIDELAND
Tideland Power Board – Model 530.1125.00 For reliable power distribution and control in marine and industrial applications. This power board is commonly used in navigational aids, offshore platforms, and other c...
Agnes, Australia - Trusted Seller
FOXBORO VORTEX FLOWMETER
- Manufacturer: Foxboro
a reliable solution for accurate flow measurement of liquids, gases, and steam in industrial applications. This flowmeter uses the vortex shedding principle for precise readings and operates effectively under a w...
Agnes, Australia 
Atlas-Copco G 15 Industrial Compressor
- Manufacturer: Atlas-Copco
- Model: G 15
Good condition Atlas-Copco G 15 Industrial Compressors manufactured in 2021. Located in USA and other countries. Click request price for more information.
USA