Used Papermaking in Canada

VOITH MDL 10VS VERTICAL PRESSURE SCREEN S/S

• Manufacturer: Voith

108917 One (1) used Voith Model 10VS vertical pressure screen, multifoil rotor, S/N 22650, New 2000

FIBERPREP LAMORT SIZE II SCAVENGER DRIVE ASSEMBLY W/EXTRACTION CHAMBER

• Manufacturer: Fiberprep

107033 One (1) used Fiberprep Lamort Size II scavenger drive assembly with extraction chamber and knife .

SPROUT WALDRON MODEL R12MA 12" DD REFINER

• Manufacturer: Sprout Waldron
• Model: R12MA

110240 Used Sprout Waldron Model R12MA 12" Double Disc refiner. Can be used as Large Pilot or small production refiner, mechanically loaded (via handwheel) commonly equipped with a 50HP, 1140 RPM motor, can...

FALK MODEL 2157ZBXKU2-S RATIO 5.691 -1 RATIO 450 HP

• Manufacturer: Falk

110129 Used Falk Model 2157ZBXKU2-S gearbox, Ratio: 5.691 - 1, HP Rating: 450HP., SERVICE FACTOR: 2.15 INPUT RPM: 1170 RPM OUTPUT RPM: 205.6 RPM SHAFT DIA- INPUT: 3.875", OUTPUT: 7" ANGULAR

BF PERKINS Model C Mullen Burst Tester

• Manufacturer: Perkins

109961 Refurbished BF Perkins Model C Mullen Burst Tester It has a 115 VAC motor. This is used to measure burst pressures to a maximum 200 PSI The instrument is equipped with a single 120PSI gauge. The manual ...

APPLETON S-210 CORE CUTTER 90 INCH 2HP

• Manufacturer: Appleton

Used Appleton Core Cutter for sale MODEL: S-210 MANDREL: 10.8" SCCR: 65 KA - 600VRMS ELEC ASSY: 155878 AC MOTOR - 575 VOLTS 2HP Motor 3 PHASE - 60 Hz - 1288 WATTS 2.24 AMPS GEARBOX - NORD GEAR

TECHNIDYNE BNL-3 OPACITY METER

• Manufacturer: TECHNIDYNE

107601 One (1) Rebuilt Technidyne BNL-3 Opacity METER, s/n 2587, features digital panel readout, long lamp life, push button calibration and minimal operator training, comes with BCD and RS-232C outputs. Manual i...

FIBERPREP LAMORT SIZE II SCAVENGER DRIVE ASSEMBLY RECONDITIONED

• Manufacturer: Fiberprep

107034 One (1) reconditioned Fiberprep Lamort Size II scavenger drive assembly with extraction chamber.

20' Hemco Trimmer

• Manufacturer: Hemco

- Board dealer c/w 6 strand 81X, motor & drive - good condition - Trimmer - Left hand, 11 saws, 22" diameter carbide, 7 HP on "0" saw, 5 HP on all others, 11 cylinders, 9 air actuators. Will pass 24 ft board. Inf...

30' Rollcase (Approx.)

• Manufacturer: Canadian Mill Equipment

- Nine (9) 8" diameter x 26" face bedrolls c/w double single chain drive mounted onto a channel frame - No drive unit

20' Rollcase (Approx.)

• Manufacturer: Canadian Mill Equipment

- Seven (7) 8" diameter x 34" face bedrolls c/w double single chain drive mounted onto a channel frame - No drive unit

CanCar Side Head Module

• Manufacturer: CanCar

- Side head module - 3 knife segments - 2 Coleman inserted outfeed rolls - 5 HP - No motors

Optimil Double Length Infeed - Side Shift and Skew

• Manufacturer: Optimil

- Built in 1999 - 4" to 20" diameter (was set up for 14" diameter) - 8' to 20' length - Base feed speed 300 FPM @ 60 hz - Main frame supported on two (2) roundway slides c/w linear positioners - Twelve (12) holdd...

Comact DDM10 Line

• Manufacturer: Comact

- 10 years old - Approx. 120' V-flite conveyor including drive and attached control devices - Flying log turner - new HD upgrade 2011-12? (Quad roll) - DDM10 full profile machine, 480 volt - All drive units, moto...

SUNDS DEFIBRATOR RGP 70/76 CD

• Manufacturer: SUNDS