Building Filters
- Trusted Seller
6 Ton 4-Post Vertical Press 24x24x16" 15Hp 460V Hydraulic Power Unit Punch Die
In good working condition. 6 ton capacity. 6" stroke length. Press plate and table thickness is 4 and 5" Press is set up with limit switch stops. Control panel is not complete. Has enclosures and some safety con...
30T 10”X10”, TWO PRESSES W/HYD UNIT, 28” DL., 22” STR.
TWO PRESSES ON A COMMON BASE WITH CONTROLS AND HYDRAULIC UNITS. 10” X 10” NOMINAL PLATEN SIZE. DISTANCE BETWEEN SLAB SIDES IS 11” L TO R. DAYLIGHT WITH PLATENS 28”, DAYLIGHT WITHOUT 31”. TWO ELECTRIC PLATENS 10” ...
Grand Rapids, MI
30T 10”X10”, TWO PRESSES W/HYD UNIT, 29” DL., 22” STR.
TWO PRESSES ON A COMMON BASE WITH CONTROLS AND HYDRAULIC UNITS. 10” X 10” NOMINAL PLATEN SIZE. DISTANCE BETWEEN SLAB SIDES 11” L TO R, DAYLIGHT 29 ½”. APPROX STROKE 22”, DOUBLE ACTING MAIN RAM 5 ½” BORE, 4 ¼” ROD...
Grand Rapids, MI
20T 46″X45″,38″ DL, 24″ STR, FREE STANDING POWER UNIT, 4-POST
J.R. AUTOMATION # 8140. NOMINAL BED SIZE OF 46” X 45” OVERALL L TO R IS APPROX 58”; APPROX 32” F TO B BETWEEN THE POSTS. TWO PARKER 4” BORE CYLINDERS WITH 2.5” DIA RODS AND 24” MAX STROKE. MAX DAYLIGHT IS APPROX ...
Grand Rapids, MI
800T 80″X36″,12″-18″ DL, 12″ STR, (8) 10″ CYLS, POWER UNIT, NEWMAN
- Manufacturer: Newman
MODEL: 480-800. SERIAL #14497. BURNT PLATE CONSTRUCTION. ACTUAL BED AND SLIDE AREA IS APPROX 94” L TO R X 40” F TO B. *PRESS IS SET UP WITH ELECTRICALLY HEATED PLATENS THAT RESULT IN A HEATED AREA OF 80” X 36”. T...
Grand Rapids, MI
176T 20″X20″,5.5”DL./STR.,2)4-POST PRESSES W/1 HYD UNIT
PUMP RATED TO 3,000 PSI; APPROX 24 GALLON TANK; ETC… RELAY CONTROL CONSOLE: ADJUSTABLE PRESSURE GAGE; CHROMOLOX TEMP CONTROLLER; CURE TIMER; HEAT TIMER; CLOSE/OPEN; E-STOP; 100 AMP DISCONNECT, ETC…PRESS HAS 48” L...
Grand Rapids, MI
170T 19”X17”,16”DAYLIGHT,12”STROKE,4-POST,5HP,CONTROLS
NEW ELECTRICAL CONTROLS AND REFURBISHED HYDRAULIC SYSTEM IN 2002. OVERALL BED SIZE: 29” L TO R X 17” F TO B. DISTANCE BETWEEN POSTS: 19” L TO R X 8” F TO B. NOMINAL BED: 19” X 17”. APPROX 16” DAYLIGHT. DOUBLE ACT...
Grand Rapids, MIMcCOY CLINCHER BUCKING UNIT GRIFFITH
- Manufacturer: McCOY
Type III with Lockjaw backup Max. hydraulic operating pressure 3,000 psi. Hydraulic unit:Model PU7560 Dimensions: Main body ...
- Trusted Seller
Computer Numerical Control Envelope Die-Cutting Machine (CPC-NA25)
This 3 axis computer controlled hydraulic travelling head machine features 25 tons of available tonnage and a 19.7”D x 19.7”W head size. Features 3 AXIS COMPUTER CONTROLLED HYDRAULIC TRAVELING HEAD DIE CUTTING MA...
Camarillo, CA - Trusted Seller
1987 400 TON FUKUI BLANKING PRESS. 72" X .128" X 70,000 LB SERVO FEEDLINE #0956723
- Manufacturer: Fukui
- Capacity: 31,751.44 kg
- Stroke length: 254 mm
PRESS: FEED SYSTEM: LOOPING PIT ROLL FEED UNIT AUTOMATIC FEED CO STACKERS BLANK STACKER STATION 1: BLANK STACKER STATION 2: LINE EQUIPPED WITH UPGRADED TOLEDO INTEGRATED TECHNOLOGIES CONTROL IN 2015 NOTE* FEED LI...
Toledo, OH - Trusted Seller
30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12"
- Manufacturer: Wabash
- Model: G302-CX
30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12" Used 30 ton Wabash Genesis platen press, model G302-CX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 4" daylight, 17" wide tie ...
Cleveland, OH 
TMP French Oil TMP 850 Ton Hydraulic Press
- Manufacturer: TMP French Oil
One (1) Used TMP 30” x 30” press, 850 ton, 24” daylight between platens, 24” stroke, electric platens, incomplete self contained hydraulic_unit_incomplete_controls
Cleveland, OH
TMP French Oil TMP 150 Ton Hydraulic Rubber Press
- Manufacturer: TMP French Oil
Item 3050 - One (1) Used TMP 18” x 18” press, 150 ton, 6” daylight between platens, 6” stroke, (1) electric platen, self contained hydraulic unit, controls
Cleveland, OH- Trusted Seller
100 TON HYDRAULIC SPOTTING PRESS Z23006
Capacity, Approx.: 100 Ton Clamping Pressure, Max.: 3000 PSI Daylight: 42-1/2" Between Posts: 48" Platens: 34" x 50" EQUIPPED WITH: Booking On Upper Platen Shuttle Table Control Console MOTOR DATA: 30 HP Hydrauli...
TMP French Oil TMP 400 Ton 24x28 Hydraulic Press
- Manufacturer: TMP French Oil
One (1) Used TMP 24” x 28” press, 400 ton, 12” daylight between platens, 12” stroke, (1) electric platen, incomplete self contained hydraulic unit, incomplete controls
Cleveland, OH
