Building Filters
- Trusted Seller
62.8 Ton FH Maloney 4 Post Molding Press, 16" x 16"
- Manufacturer: FH Maloney
62.8 Ton FH Maloney 4 Post Molding Press, 16" x 16" Used FH Maloney 4 post molding press, 200 ton capacity rerated to 62.8 ton capacity, 16" x 16" electrically heated platens, 10.5" max daylight, 8" diameter main...
Cleveland, OH - Trusted Seller
30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12"
- Manufacturer: Wabash
- Model: G302-CX
30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12" Used 30 ton Wabash Genesis platen press, model G302-CX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 4" daylight, 17" wide tie ...
Cleveland, OH - Trusted Seller
30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12"
- Manufacturer: Wabash
- Model: 30-1212-4STMBX
30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12" Used 30 ton Wabash press, model 30-1212-4STMBX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 3" daylight spacing, 14.5" wide tie...
Cleveland, OH - Trusted Seller
Brown Trim Press, Model T-300
- Manufacturer: Brown
- Model: T-300
Brown Trim Press, Model T-300 Used Brown model T-300 trim press, 11.75" x 37.5" wide cutting window, driven by ac motor, with canopy, control panel, 480 volt, serial# 8791.
Cleveland, OH - Trusted Seller
12 Ton Carver Press, Model C, 6" x 6"
- Manufacturer: Carver
12 Ton Carver Press, Model C, 6" x 6" Used Carver Bench Top Press, Model C, 12 ton compression, 6" x 6" platen, electrically heated upper platen, missing lower platen, hand hydraulic pump, Serial No. 25576-960.
Cleveland, OH - Trusted Seller
250 TON NIAGARA MODEL SE4-250-84-60 STRAIGHT SIDE PRESS/VAMCO FEEDER/LITTELL BACK END
- Manufacturer: Niagara
- Capacity: 250,000 kg
- Stroke length: 152.4 mm
This used 250 Ton Niagara Model SE4-250-84-60 straight side press is a robust piece of industrial equipment designed for high-capacity performance. With a bed and slide area measuring 84 inches by 60 inches, it o...
Cleveland, OH - Trusted Seller
MINSTER 90
- Manufacturer: Minster
- Model: 90
- Stroke length: 76.2 mm
- Shut height: 419.1 mm
The MINSTER 90 Knuckle Joint Press, a robust machine suitable for demanding industrial applications, offers a force capacity of 250 tons. This used press is equipped with an air clutch and brake system, providing...
Ohio, USA - Trusted Seller
66 TON AIDA GAP FRAME PRESS
- Manufacturer: Aida
- Model: NC1-600
- Stroke length: 139.95 mm
- Shut height: 299.72 mm
This used 66-ton AIDA Gap Frame Press, model NC1-600(2)E, is designed for versatile industrial applications. It has a stroke length of 5.51 inches and a slide adjustment range of up to 2.7 inches, allowing for pr...
Monclova, OH - Trusted Seller
1957 MINSTER P2-100
- Manufacturer: Minster
- Model: P2-100
- Stroke length: 76.2 mm
- Shut height: 355.6 mm
The 1957 Minster P2-100 is a used straight side mechanical press known for its robust construction and reliable performance in industrial environments. It features an air clutch and brake system, palm buttons, an...
Ohio, USA 3 Danly-IEM 5-1658-6 2" Diameter x 16 7/16 Length Press Fit Guide Pin Hard
- Manufacturer: Danly
The product is a set of 3 Danly-IEM 5-1658-6 press fit guide pins. Each pin has a 2" diameter and a length of 16 7/16 inches. These pins are designed for use in metalworking applications, providing guidance and p...
$455 USDOregon, OH
Stainless Steel High Pressure Vessels
Stainless Steel High Pressure Vessels High pressure vessels are used in various industries including chemical, process heating, energy, oil and gas, and so on to store fluids at high pressures. These pressure ves...
West Alexandria, OH
Stainless Steel Pressure Vessels & Tanks
Stainless Steel Pressure Vessels & Tanks Rexarc designs and fabricates ASME coded and non-coded pressure vessels in the US. With generations of tank excellence backing our work, Rexarc is a preferred supplier for...
West Alexandria, OH
