Used Wine Processing

Consolidated TG-14-31 Capper

• Manufacturer: Consolidated

Used Consolidated, rotary capper, model TG-14-31. The machine was manufactured in 1987. The machine has 14 capping heads and is equipped with 'Torque-Open' chucks. It is rated at a Normal Operating Rate of approx...

Resina S-40 Capper

• Manufacturer: Resina

Used Resina, single spindle, model S-40 capper. This is a fully automatic capper. It is equipped with a single, back container gripper and operation is from right to left. This machine is equipped with the lift p...

Cap/Bottle Hopper/Elevator

Used cap/bottle hopper-elevator. The machine is all stainless steel construction. The hopper is approximately 7 feet long by 6 feet wide at the top. The bottom tapers to the width of the elevator belt which is ap...

Pneumatic Scale 16 Head Capper

Used 16 head, Pneumatic Scale, plastic over-capper. This is not a screw capper, but a press-on overcapper. Included with the machine is the cap feed system and the Hoppman model FT150-1L-CRS sorter. This is a sta...

NEW ENGLAND MACHINE CAP HOPPER/ELEV.ATOR/SORTERATOR

Item is a used New England Machine, S/S cap hopper/elevator-sorter. The elevator is 20" wide and approximately 8' tall. This is a vertical (waterfall style) cap sorter. It was utilized with NEM dual head capper (...

New England Machine Dual Head Capper

Item is a used, New England Machine Dual Head Capper. It was utilized to run large diameter caps, (83MM and larger) on square/rectangular containers of pretzels (no container handling parts are included). A short...

Accumulation Disk 36 inch

NEW 36 inch unscramble/accumulation disk. The disk is of heavy duty construction utilizing a stainless steel disk with a 3/16 inch SS support disk. The frame is also stainless steel and constructed of 1 1/2 inch ...

Used Lanxess Velcorin DT6 Touch - 2020

• Manufacturer: Lanxess Velcorin

(1) Available - Used Lanxess Velcorin DT6 Touch dosing machine (2020). VELCORIN® DT features: • consistent homogenous VELCORIN® dispersion • reliable dosing pump with high accuracy • VELCORIN® DT for 3 kg contai...

Used Mori 6 spout gravity filler

• Manufacturer: Mori

Item is a used Mori 6 head gravity filler with wheeled stand. The manufacturer states - These fillers have gained wide acclaim and become a staple in hundreds of wineries and distilleries across the United State...

Resina S-30 Capper

• Manufacturer: Resina

condition: Very Good Item is a used, Resina, model S-30, single chuck capper. This is a fully automatic machine capable of production rates of up to 45 BPM depending on container and closure characteristics. Mach...

RESINA NRW 500 INLINE CAPPER

• Manufacturer: Resina

Item is a used, Resina, model NRW 500 inline capper. The machine is designed to run large containers (up to 2 1/2 gallon) and large closures (70MM to 150MM) at high speeds. The machiine is rated at up to 300 CPM ...

NS BSV 7 bbl Mash/Lauter Tun

-7bbl Mash/ Lauter tun - insulated, stainless clad, #4 finish, side manway door for grain out, top manway door, Optional -Motorized rake with drop down grain out arm - Add $5500 -Steam jacket - Add $1950

36" Rotary Accumulaltion table

• Manufacturer: ATE

condition: Very Good Item is a used, 36" rotary accumulation disk. Machine is all S/S construction with variable speed controls.(NEMA 4). Power requirement is 120 volt/single phase.

Biner-Ellison Feed/Dump Table

• Manufacturer: Biner Ellison

Item is a used, Biner-Ellison Feedomatic Single Liner. The machine is designed for dumping containers (round or non-round) from reshipper cartons. The containers are dumped onto the infeed section of the machine....

2013 NJM Packaging BTORQCA-AO1 Cap Hopper/Elevator/Sorter

• Manufacturer: NJM

Item is a used NJM Packaging Cap Hopper/Elevator/Sorter. Machine is S/S construction with the hopper being approximately 42" x 42" at the top. The flights are 10" wide and spaced at approximately 3" intervals. Th...