Used Machine Tools in Saxony, Germany

SCHUNK Hydraulic expansion mandrel

• Manufacturer: Schunk

Hydraulic expansion mandrel SCHUNK FORTIS SSD-S Ø19 200160 Tool holder: Ø 7 mm, depth: 9 mm Shank diameter: Ø 19 mm, length: 100 mm Machine side: Shank diameter: Ø 23 mm, length: 30 mm As good as new !

WIDIA UTS installation base holder

• Manufacturer: WIDIA

UTS installation base holder, tool holder WIDIA, VALENITE, HEINLEIN 263.72.670.00 New !

PAGUS 3-jaw chuck

• Manufacturer: Pagus

Sondas de ultrasonidos Outside ø: 200 mm | Centering ø: 155 mm | Hole circle ø (chuck): 182 mm | Bore ø: 65 mm | Height with jaws: 104 mm | Dimensions ( lathe chuck ): 200 x 200 x 104 mm

WIDIA clamp holder

• Manufacturer: Pagus

Clamp holder, tool holder, tool carrier WIDIA WIDAX 225.15.623.00 New !

PAGUS clamping angle

• Manufacturer: Pagus

Clamping angle, angle table PAGUS used, tested ! Heavy duty version!!!

WIDIA clamp holder

• Manufacturer: WIDIA

Clamp holder, tool holder WIDIA WIDAX HEINLEIN SK 1F ( SK1F ) 1.214.75.103 214.75.125 214 75 066 D 0I Ø 125 - 250 mm New !

GLEASON - HURTH Roller burr wheel

• Manufacturer: Gleason-Pfauter

Roller burr wheel, roller burr tool GLEASON - HURTH Ø 203 mm z = 77 1104457-1 ESW / EGW - 326735 Bore Ø 40 mm used, tested !

connection make on the pull

Grinding spindle SAAKE UW II A CNC 1x outer taper, diameter: Ø 17 / 23 mm, length: 38 mm with thread: M28 x 1.5 Length: 15 mm Clamping nut: Internal thread: M28 x 1.5 / 1 inch V-ribbed belt pulley: Diameter: Ø 62...

DKF grinding spindle

Grinding spindle DKF 1.8-4-4/3 TGL 4870 1x flat belt wheel: Ø 50 mm, length: 80 mm ( barrel-shaped ) 1x extended spindle shaft, diameter: Ø 28 mm, length: 125 mm with internal thread: M12 x 1.75 and guide bush, d...

RÖHM power chuck

• Manufacturer: Röhm

Power chucks, 3-jaw chucks, three-jaw chucks, wedge hook chucks RÖHM KFD-200/3HS 143888 Height without 3x screw M12 x 1.75 Jaws individually adjustable by toothing ! with accessories ! New !

WMW impact cutter

• Manufacturer: WMW

Impact tooth cutter, Flycutter WMW SK 50 x 262 mm tool side: diameter: Ø 80 mm, length: 250 mm used, tested !

DEUTSCHE HERSTELLER Assortment of end mills

Assortment of end mills, 25 pieces GERMAN MANUFACTURER Ø 10 - 14 mm tool holder; MK1 / M6 x 1.0 Other quantities on request ! As good as new !

DEUTSCHE HERSTELLER Assortment of end mills

Assortment of end mills, 85 pieces GERMAN MANUFACTURER Ø 14 - 22 mm Tool holder; MK2 / M10 x 1.5 Other quantities on request ! As good as new !

DEUTSCHE HERSTELLER Assortment of end mills

Assortment of end mills, 57 pieces GERMAN MANUFACTURER Ø 14 - 32 mm Tool holder; MK3 / M12 x 1.75 Other quantities on request ! As good as new !

TRUSIOMA spray nozzle holder

Spray nozzle holder TRUSIOMA EI-45 Spare part for plastic molding machine TRUSIOMA EI-45 ! used, tested !