Used plc in Wallonia, Belgium

2014 DISAMATIC 030 B-150

• Manufacturer: DISA

SIEMENS PLC S7-300 Without core setter With pattern changer manipulator

Moulding machine OSBORN, type PJ4F 716,

In good condition, serial number 70258 With control box, with PLC Squeeze strocke 165 mm

Core shooter AHB, 40 l, cold box

Year of construction: 1992, weight: 5 t With vacuum clamping With vacuum pump With gassing plate With cabin With hydraulic unit Control PLC MÖLLER

1992 Green sand cooler SIMPSON MC200

Dimensions: total length 10 710mm, length of machine body 6750mm, width 3700, height 5900mm Electric control by PLC SIEMENSS5 Cooler bottom made of ceramic

2006 Decoving machine MASDIM

With 2 pneumatic hammers With 2 vibrating motors to shake out the sand With electric control by PLC ALLEN BRADLEY With noise protection cabin With full automatic process With sand extraction belt

Furansand mixer BORDEN/IMF 5-6 t/h

Machine installed on a framework With sand bunker, filter and probes Gassng machine CO²-Betaset BORDEN type 10 heating 3800W, N150 Command over automat TELEMECANIC PLC Equiped by some sondes to fill the 3 shooter...

Greensand cooler SIMPSON MC, 135 t/h

cooler drive 75 kW ventilator 37 kW 24000 m³/h pression 400 mm WC electric control by PLC Siemens S5 and water dosing water inlet 100 l/min pression 3-6 bar

Moulding machine HWS, type HSP 2

66 moulding boxes 700 mm x 550 mm, h. 225 mm With: - Sand hopper and extraction belt - Rolling conveyor 8 m - Air tank 1000 l - Electric control by PLC Siemens S5, 100 V

Screw mixer for core sand 6t/h REISAUS-BAUMBERG

• Manufacturer: REISAUS-BAUMBERG

5,5kW, 400V 50Hz Dimensions: Lenght: 2830mm; With hopper and filling level sensor (3 dosages possible) With 2 screw for additiv With 2 acid pumps With control board PLC SIEMENS S7 Mixer is swivelling by hand Mixe...

Hydraulic core shooter, VOGEL & SCHEMMANN, 10 l

• Manufacturer: Vogel

Type: KSM61000-CO2, serial number: 4396, Com. number: 19.355Year of construction: 1991 Control PLC Siemens S5 With cabin and gassing unit Hydraulic movement With hydraulic unit With vacuum clamping The machine ca...

Core sand mixing plant, ± 2 - 3 t/h

Brand: BADIE, serial number: 7,79 mixingcup contenance 60 lit. With batch mixer Mixtensif, type KSU100, Ø 600 mm, for 120 kg sand With sand hopper above the mixer With 2supports for 60 l drums With 2 pumps and PL...

Semi-automatic moulding line HWS / HSP 2

50 complete moulds on the plant 4 pouring and cooling lines (partly motorized) 1 mould return line with 3 turnings stations2 transfer carriages 1 mobile push-out station Remolding by hand with chain hoist SIEMENS...

2008 Core Shooter RÖPER FCS 25 HV-K

• Manufacturer: Laempe / Röperwerk

Dimensions of core boxe vertical: 800 x 530 x max. height 750mm Wuth hydraulic unit, power 37 kW With electric control PLC SIEMENS S7-300 With 2x shot heads Table povement by gear motor and frequency converter Ga...

2005 Automatic pouring installation

Construction year: 2005, weight: 10000 kg Automatic pouring installation with central bottom pouring ladle and 2 loading ladles Plug supervision SELCOM and PLC Siemens Automatic metal loading by 2 ladles on hydra...

Coreshooter PETERLE, cold box 18 l

• Manufacturer: Peterle

Type: Cold matic L18, serial number: 1166 Belt automate Corebox dimensions: 600 mm x 200-600 mm, h. 400 mm- Joint vertical, max opening 840 mm With PLC SIEMENS S5-115U and OP27 With central lubrification With c...