Used controller in Belgium

Screw mixer BORDEN, ± 2 t/h with 2 hoppers

With sand hopper, 2 compartments, contenance total ± 2,2 m³ on feet With extraction screw With additive bunker ± 0.22 m³ Wiht dosing screw and impeller The large bunker has 4 pneunamtic metering sliders The meter...

Core shooter RÖPER H25 completely hydraulic

• Manufacturer: Laempe / Röperwerk

Shot volume 25l Dimensions (without cabin): Width: 2560mm; Depth: 2000mm; Height: 2800mm With cabin Hydraulic table With hydraulic side clamping With core extraction slide and ejector With hydraulic unit 30bar; 4...

2006 Green sand mixer WEBAC with accessory, 28 t/h

• Manufacturer: Webac

The capacity depends on the quality of the bentonite and of the sand Three-phase-motor, type 280M4 2 mixing runners Accessories: -water control SENSOR CONTROL FRS-M -sand scale -elevator -injection system

1999 Gazing unit LÜBER LW FDA 3250 32 kW

• Manufacturer: Lüber

32kW; 400V; 50Hz Dimensions: Lenght: ±1500mm; Width: ±900mm; Hight: ±1800mm The control for the gazing cycle is controled by the core shooter the unit is equiped by a smal amin vessel (±2l) with connection to a c...

Sand conveyor 350 l, OFFICINE

Year of construction: 1996, Weight : ± 250 kg Konus in good condition With switch panel With pneumatic control valves Ø entry 250mm, Ø exit 90mm With pressure control valve, with additional accelerator at the exit

Hydraulic separating wedge DISA TK-3/300

• Manufacturer: DISA

With control panel With spring balancer Max working pressure: 300bar | Stroke of the wedge: 100mm | Jaws lenght: 265mm | Min wedge tip retracted: 26mm | Max wedge tip extended: 48mm | Cutting force: 20500daN | Hy...

Screw mixer AXMANN 5 t/h

• Manufacturer: Axmann

External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

Casting ladle motorized 20t, IBW

• Manufacturer: IBW

With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the overside With mechanical switch to "tilting by hand" With useable lining and 2 pour...

2006 Motorized casting ladle, 14t, IBW

Vessel: depth: ø1750 mm, h. 1630 mm Height of the hook ±800 mm With motorized tilting and remote control With manual gearmotor, frequency controlled With counterweight on the overside With mechanical switch to "t...