Printing » Pre-press

Building Filters

14

Used pre and post processing

Trusted Seller
Hunkeler UW8 / RW6, 150m,Tight web. R-version
- Manufacturer: Hunkeler
- Model: RW6
2x core 70mm (22"+20") Airshaft diameter included in mm: 70 | Option (not included): LI4 speed upgrade, other airshaft diameter e.g. 200mm | Frequency: 50 Hz.+ 60 Hz. | Availability /ex works: imm / Showroom Nure...
Europe
Trusted Seller
Hunkeler webbuffer WB6 7177 220m, YOM 2018 (05)
- Manufacturer: Hunkeler
- Model: WB6
none Airshaft diameter included in mm: none | Option (not included): speed upgrade, external vacuum units | Frequency: 50-60Hz | Availability /ex works: imm / warehouse p2p EU | P2p ref. nr.: wb6_05e
Europe
Trusted Seller
Lasermax unwinder LX550, incl. vacuumunit (08)
- Manufacturer: Lasermax-Stralfors-Tecnau
airshaft 70mm, external vacuum unit (not attached)
Europe
Trusted Seller
Tecnau perforator TC1550 (09) 2-up with puncher
- Manufacturer: Löcher
- Model: TC1550
Speed in m/min: up to 520mm | Webwidth: up to 520mm | Knives: 1x vertical each (1 left, 1 right) / 2x longitude knives + 1x punch unit | Option (not included): Interface, cross turning unit, WEKO moisturizer rf...
Europe
Trusted Seller
Hunkeler RW6, 150m, TW, right version, YOM 2016 (109)
- Manufacturer: Hunkeler
- Model: RW6
Papertransport: tight web | Option (not included)core / airshaft 70 or 200mm: Unwinder 20,5 or 22" tight web | Frequency: 50 Hz. - 60 Hz. | Availability /ex works: imm / GE | P2p ref. nr.: hr615_109TW
Europe
Trusted Seller
Weko RFDi moisturizer, paper conditioning Y2012 (09)
- Manufacturer: Weko
- Model: RFDI
Frequency: 50 Hz.+ 60 Hz | Mileage: good condition | Availability /ex works: imm / GE 91083 Baiersdord, warehouse p2p) | P2p ref. nr.: wko_rfdi_09
Europe
Trusted Seller
Weko RFDi moisturizer, paper conditioning Y2011 (06)
- Manufacturer: Weko
- Model: RFDI
Frequency: 50 Hz. | Mileage: very good condition | Availability /ex works: imm / EU | P2p ref. nr.: wko_rfdi_06
Europe
Trusted Seller
Lasermax unwinder LX550, airshaft, YOM 2010 (06)
- Manufacturer: Lasermax-Stralfors-Tecnau
airshaft 70mm, lvacuum unit (Atr. 749608/001 Speed in m/min: up to 150 / 450ft/min (depending on core) | Option (not included): Interface, other airshaft diameter e.g. 150mm, cross turning unit, WEKO moisturizer ...
Europe
Trusted Seller
2010 Hunkeler RW6 #PP214
- Manufacturer: Hunkeler
- Model: RW6
Airshaft: 70 mm | Speed: 100m/min
Munich, Germany
Trusted Seller
2007 Hunkeler RW6 #PP210
- Manufacturer: Hunkeler
- Model: RW6
Speed: 100m/min | Optional airshaft: 70mm, 150mm, 200mm
Munich, Germany
Trusted Seller
2013 Hunkeler WB7-30 #PP209
- Manufacturer: Hunkeler
- Model: WB7
Hunkeler WB7-30 Web buffer module Speed: until 100m/min. | Paper weight: until 150 g/sm | Paper width: until 30 inch
Munich, Germany
Trusted Seller
Lasermax / Tecnau LX550 / LX555 #PP198
- Manufacturer: Lasermax-Stralfors-Tecnau
- Model: LX550
Speed: up to 150 m/min. | Airshaft: 70 mm | Additions: cleaned and in fully function tested!
Munich, Germany
Trusted Seller
CEM DocuConverter in-line finishing device
- Manufacturer: Print Finishing Solutions / Accessories
Copied from the xerox nuvera brochure: The CEM DocuConverter optimizes cut sheet printing by allowing document sheets to beprinted on the most cost-effective stock sizeand converted into the required documentsiz...
Europe
Trusted Seller
Hunkeler RW6, 100m, slack web, YOM 2007 (108)
- Manufacturer: Hunkeler
- Model: RW6
unwinder with vacuum loop and loop control Papertransport: slack or loose web | Option (not included)core / airshaft 70 or 200mm: Unwinder with vacuum loop and loop control | Frequency: 50 Hz. - 60 Hz. | Availabi...
Europe

Overview

Pre-press equipment includes machines and tools used in the preparation of print materials before they go to the press. This category encompasses a variety of equipment such as plate setters, film processors, and proofing systems. These machines ensure that the digital files are correctly formatted and ready for printing, offering precision and efficiency in the printing process.

FAQ

What factors should I consider when buying pre-press equipment?

Consider the type of printing you will be doing, the compatibility with your existing systems, the equipment's condition, and whether it supports the latest software and file formats.

How can I ensure safe shipping for pre-press equipment?

Use a specialized shipping service that handles delicate and precision equipment. Ensure the equipment is properly packed, cushioned, and secured to prevent any damage during transit.

What is the maintenance schedule for pre-press equipment?

Regular maintenance includes cleaning the equipment, updating software, and checking for any worn or damaged parts. Refer to the manufacturer’s manual for specific maintenance guidelines and intervals.