Used in New Zealand

Food Display Cabinet

FPG Type 5000 Open Front Refrigerated Food Display Cabinet, single phase, 4 tier, int dims approx. 1143mm x 547mm D x 774mm H. O’all dims approx. 1200mm x 800mm x 1435mm H.

2023 Proofer

Sinmag LG-232SZ Proofer Cabinet, YOM 2023, single phase, 2800w, for 32 trays (400mm x 600mm), operating temperature range -10 to 40 degrees Celcius, further info: O’all dims approx. 780mm x 1215mm x 1960mm H.

Smokehouse

Smokehouse, electrically heated, 3 phase, 50 amp connection, vendor ran unit at 120 degrees Celcius, has rack on wheels with stainless steel wire trays (approx. 900mm x 900mm each). O’all dims approx. 1650mm x 13...

Smokehouse

Smokehouse, cold smoke only, connect air compressor to unit to circulate the smoke (compressor not included), int dims approx. 675mm W x 875mm D x 1885mm H. O’all dims approx. 1020mm x 1100mm x 2430mm H.

Jacketed Pan

Jacketed Pan, stainless steel, 3 ph scrape surface mixer (20amp 4 pin plug), 0.75kw gear motor, 35rpm, steam jacket (requires external heat source e.g. steam boiler for heating), working pressure 50psi, lid, outl...

Jacketed Pan

Jacketed Pan, stainless steel, painted steel steam jacket (requires external heat source e.g. steam boiler for heating), working pressure 50lbs, outlet approx. 28mm, int pan dims approx. 810mm ID x 820mm D. O’all...

Jacketed Pan

Jacketed Pan, stainless steel, lid, steam jacket (requires external heat source e.g. steam boiler for heating), working pressure 350kPa, outlet approx. 28mm, int pan dims approx. 755mm ID x 580mm D. O’all dims ap...

Pasteuriser

Mercer Pasteuriser, 3 ph (20amp 5 pin plug), was run at 100 degrees Celcius, stainless steel, int dims approx. 595mm W x 470mm D x 755mm H. O’all dims approx. 790mm W x 650mm D x 1425mm H.

Elevator

Elevator/Inclined Conveyor, 3 ph, drum roller drive unit, start/stop buttons, stainless steel, discharge height approx. 1250mm. Approx. 2750mm L x 300mm W (belt width but only 250mm usable).

Conveyor - Belt

Belt Conveyor, 3 ph, motorised roller drum drive unit, no controls, stainless steel sides, no legs. Belt approx. 4100mm L x 400mm W.

Conveyor - Belt

Belt Conveyor, 3 ph motorised roller drive drum, on/off/start/stop controls, stainless steel sides and legs. Belt approx. 5800mm L x 390mm W x 970mm H.

Conveyor - Belt

Belt Conveyor, 0.25 geared drive, stainless steel sides, no legs. Belt approx. 4800mm L x 260mm W.

Elevator

Elevator/Inclined Conveyor, 3 ph, start/stop controls, stainless steel frame, wheels at outfeed end, belt width 400mm, infeed height approx. 330mm, outfeed height approx. 900mm. O’all dims approx. 2700mm x 770mm ...

Capper

Capper, pneumatic (requires compressed air to run), pedal operated, bench top, for screw caps 28-90mm (has change parts). O’all dims approx. 330mm x 430mm x 700mm H.

Air Compressor

ABAC B5300-270 FT 5.5 Air Compressor, 3 ph, 5.5hp, 270L built in air receiver, includes standalone 200L air receiver. Compressor approx. 1500mm x 675mm x 1300mm H, receiver approx. 470mm Ø x 1600mm H.

Fabo POWERMIX 200 Concrete Batching Plant

• Manufacturer: Fabo
• Model: POWERMIX 200

Good condition Fabo POWERMIX 200 Concrete Batching Plants available between 2022 and 2023 years. Located in Austria and other countries. Click request price for more information.