Dynabrade 12207 Stockade Reciprocating Stockade Filer/Saw Versatility Kit
new
- Manufacturer: Dynabrade
12205 Stockade Saw. Three adapters: 12197 for Dynabrade 6" long files; 12211 for foundry file; 12212 for saw blades. 12183 Saw Guard Assembly (must be used with saw blades). Two 6" long files (90980 Pillar; 90983...
$1,494 USDLebanon, NJ- Trusted Seller
KALAMAZOO K20FS
new
- Manufacturer: Kalamazoo
- Model: K20FS
- Motor: 15 HP and or 20HP, 3 PH (220/440V)
- Weight: 2,100 lbs.
KALAMAZOO K20FS 20" Abrasive Foundry Cutoff Saw K20FS 20 inch heavy abrasive foundry saw is a 15hp and or 20hp cutoff machine designed to cut off gates and risers on gray cast iron parts. Mag. switch, 24V at swit...
Rutland 28881000 Vertical Band Saw
used
- Manufacturer: Rutland
3-Phase Power 40" Throat Measures 68" L x 30" W x 77" H Weighs 1846 lbs.
$4,500 USDEugene, OR
Marvel 8 Mark II Bandsaw with In & Out Feed Conveyors
used
- Manufacturer: Marvel
- Model: 8 Mark II
- Motor: 3.1
- Weight: ~2800 lb
See photos for dimensions Weight: ~2800 lb | Saw type: Vertical Bandsaw with Tilt Frame | Serial: 826908 | Blade length: 14’ 6” | Blade width: 1” | Blade speed: 50-450 SFPM | Capacity: 18” x 22” | Height: 84 ½” |...
$3,800 USDEugene, OR- Trusted Seller
KALAMAZOO KM20-22V/15 / KM20-22V/20
new
- Manufacturer: Kalamazoo
- Model: KM20
- Motor: 15 hp , 3 ph, 220v, 440v, 50Hz, 575v (specify); 20 hp, 3 ph, 220v, 440v, 50Hz, 575v (specify)
- Weight: 1,700 lbs.
KALAMAZOO KM20-22V/15, 20 or 22 in. Mitre Saw Vacuum Base These products have application in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, as...
- Trusted Seller
KALAMAZOO K20AS
new
- Manufacturer: Kalamazoo
- Model: K20AS
- Motor: 15 hp, 3 ph (220/440 60 hz) ((20HP 3PH, 220/440V 60 hz – Optional)
- Weight: 500 lbs.
KALAMAZOO 20" K20AS Abrasive saw, Arm assembly K20AS 20 inch abrasive industrial chop saw arm assembly is 15HP 3PH (220V or 440V) 2500 spindle rpm abrasive chop. This unit houses a 16 in. blade up to 20 in. abras...
$4,500 USDPort Orange, FL - Trusted Seller
DoALL DC-800NC
new
- Manufacturer: DoAll
- Model: DC-800NC
- Motor: 1/4 HP
- Weight: 25,350 lbs.
DOALL 31.5" Production Bandsaw DC-800NC The DC-800NC Continental Series™ high production horizontal band saw by DoALL is designed for cutting a wide range of materials in a fully-automated capacity. If you are a ...
Port Orange, FL - Trusted Seller
KALAMAZOO K26E
new
- Manufacturer: Kalamazoo
- Model: K26E
- Motor: 40 HP, 3 PH motor. 220V or 440V - specify. Other horse power units available.
- Weight: 1,700 lbs.
KALAMAZOO K26E 26″ enclosed metallurgical abrasive saw The K26E is designed for cutting metallurgical samples. This chop saw creates little to no heat and little to no burning. K26E 26 inch enclosed wet abrasive ...
Port Orange, FL 
WELLSAW VERTICAL SAW V-20 V-20-24
new
- Manufacturer: Wellsaw
Dependable vertical sawing with extra capacity. For tool room, foundry work, and contour sawing. Your best choice. 20″ throat with 16″ under the guide (24″ for the V-20 Extended version) VFD motor drive for varia...
Ennis, TX- Trusted Seller
Wellsaw V-20
new
- Manufacturer: Wellsaw
- Model: V-20
Wellsaw Manual Vertical Bandsaw with extra capacity, exclusive 90° Rotating Blade Guide System allows you to cut any length material to a depth of 20” with 16” under the guide. For tool room, foundry work, and co...
Winnipeg, Canada - Trusted Seller
1965 Sharpening machines band saw blade ALBER
used
- Manufacturer: ALBER
- Weight: ±100kg
Suitable for sharpening band saw blades Weight: ±100kg
Amel, Belgium - Trusted Seller
Vertical metal band saw, DEMURGER ULTRA, 550 mm
used
Type: RU555TFF, serial numberr: 804 Year of construction: 2001, Weight: 1000kg Gear motor LEROY SOMER, 4 kW, 1455 rpm, 230/400 V With control box, emergency switch, water pump, light Tilting table: 750 mm x 590 m...
Amel, Belgium - Trusted Seller
Small band saw, brand FLOTT
used
- Manufacturer: Flott
- Motor: 0.45 kW, 680/1360 rpm, 380 V
tilting table In mint condition Cutting height: 160 mm | Cutting speed: 28 and 56 m/min | Motor: 0.45 kW, 680/1360 rpm, 380 V
Amel, Belgium - Trusted Seller
2000 Small wood band saw MÜLLER
used
- Manufacturer: Kleine
- Motor: 0,55 kW, 220 V single-phased, type GM80A4, 1400rpm
- Weight: ± 200 kg
On base Cuttng speed 5m/s and14 m/s over 2 stage pulleys Maximum radius 320mm Tiltable table with graduation, 540mm x 420mm Saw blade length 2300mm With limit stop
Amel, Belgium - Trusted Seller
Small band saw on foot
used
- Manufacturer: Kleine
Dimensions: Length: 800mm; Width: 450mm; Height: 1750mm 230V; 0.55kW; 1400rpm
Amel, Belgium
Tip: Enter manufacturer, model or keyword
