Used Test Generators in Florida, USA

Keysight / Agilent / HP 83731B

• Manufacturer: Agilent - Keysight
• Model: 83731B

Frequency range 1GHz - 20 GHz Output accuracy +2.5 dBm Minimum Single-Side-Band Noise -115 dBc/Hz Maximum Single-Side-Band Noise -65 dBc/Hz Harmonics (noise) -55 dBc Non-harmonics (noise) -60 dBc Pulse modula...

Keysight / Agilent / HP 8665A

• Manufacturer: Agilent - Keysight
• Model: 8665A

< -140 dBc/Hz typical SSB phase noise at 20 kHz offset at 1 GHz with Option 004 < -100 dBc nonharmonic spurious to 2 GHz reduces error when testing spurious immunity of receivers AM, FM, and optional pulse modula...

Rohde & Schwarz SFU

• Manufacturer: Rohde & Schwarz
• Model: SFU

ATV and DTV multistandard broadcast test platform Output frequency from 100 kHz to 3 GHz Generation of internal noise and interferer signals Fully digital baseband signal processing Upgradeability to multifunctio...

Keysight / Agilent / HP 8644B

• Manufacturer: Agilent - Keysight
• Model: 8644B

-136 dBc/Hz SSB phase noise at 20 kHz offset at 1 GHz < -105 dBc nonharmonic spurious up to 1 GHz allows spurious rejection tests to be fully automated with confidence ±1.0 dB output level accuracy down to -127 d...

GW Instek SFG-2110

• Manufacturer: GW Instek
• Model: SFG-2110

DDS Technology and FPGA Chip Design Frequency Range:0.1Hz - 10 MHz High Frequency Accuracy : ± 20ppm High Frequency Stability : ± 20ppm Frequency Resolution :100mHz Low Distortion Sine Wave:-55dBc,0.1Hz~200kHz Fr...

Rohde & Schwarz SMJ100A

• Manufacturer: Rohde & Schwarz
• Model: SMJ100A

IQ modulator with 200 MHz RF bandwidth Very low SSB phase noise of typ. - 133 dBc (f = 1 GHz, 20 kHz carrier offset, 1 Hz measurement bandwidth) Wideband noise of typ. -153 dBc (CW, f = 1 GHz, >5 MHz carrier spac...

Anritsu 69367B

• Manufacturer: Anritsu
• Model: 69367B

Broad frequency coverage including 0.1 Hz to 65 GHz in a single coax output Ultra-low SSB phase noise and spurious +17 dBm guaranteed leveled power to 20 GHz 0.1 Hz optional frequency resolution <5 ms switching t...

Anritsu 68137C

• Manufacturer: Anritsu
• Model: 68137

Broad frequency coverage including 0.1 Hz to 65 GHz in a single coax output Ultra-low SSB phase noise and spurious +17 dBm guaranteed leveled power to 20 GHz 0.1 Hz optional frequency resolution <5 ms switching t...

Anritsu 68167C

• Manufacturer: Anritsu
• Model: 68167C

Broad frequency coverage including 0.1 Hz to 65 GHz in a single coax output Ultra-low SSB phase noise and spurious +17 dBm guaranteed leveled power to 20 GHz 0.1 Hz optional frequency resolution <5 ms switching t...

Rohde & Schwarz SMP02

• Manufacturer: Rohde & Schwarz
• Model: SMP02

Optional pulse modulator and pulse generator Digital RF, AF and level sweep Storage of 50 complete instrument setups Optional phase modulator ASK/FSK modulation, phase offset settings Extremely low SSB phase nois...

Keysight / Agilent / HP N5183A

• Manufacturer: Agilent - Keysight
• Model: N5183A

100 kHz to 20, 31.8 or 40 GHz +18 dBm at 20 GHz output power ≤ 900 µs frequency switching speeds ≤ -98 dBc/Hz typical phase noise at 20 kHz offset AM, FM, ΦM, and pulse modulation < 10 ns pulse rise/fall time and...

Rohde & Schwarz SML03

• Manufacturer: Rohde & Schwarz
• Model: SML03

Wide output frequency range from 9 kHz to 3.3 GHz with 0.1 Hz resolution SSB phase noise: -128 dBc (1 Hz)(at f = 1 GHz, .f = 20 kHz) Setting times <10 ms High level accuracy (deviation <0.5 dB at levels >-120 dBm...

Wiltron 6659A

• Manufacturer: Wiltron
• Model: 6659A

While covering the frequency range from 0.01 to 26.5GHz, this generator offers leveled output of >10 mW (=18GHz), >5 mW (>18GHz). The 6659A has five sweep modes, as well as five CW frequencies and eight markers t...

Keysight / Agilent / HP 8114A

• Manufacturer: Agilent - Keysight
• Model: 8114A

clean, reliable and repeatable pulse waveforms easy set-up and operation full programmability protection of the device under test Single-channel high power pulse generator 50 Vpp 50 O / 50 O Maximum amplitude 100...

NC4796

Output Power Range -130 to -140 dBm/Hz Output Power Resolution: Continous On/Off Attenuation: minimum 20 dB Output Impedance: minium 10 kOhms balanced Crest Factor: minimum 5:1 Noise Generator for Testing DSL Modems