Used Processing in Germany

Optrel 5005.500 Cartridge Crystal 2.0

• Manufacturer: Optrel

The Optrel 5005.500 Crystal 2.0 cartridge is a high-quality replacement filter cassette for Optrel helmets of the Crystal series. With the innovative Crystal 2.0 technology, it offers an extremely clear view in t...

Almond sticks machine PEHA, Germany - type H1-04-600 with approx. 600 mm working width.

• Manufacturer: Peha

The almonds are fed into the hopper and go into the slicing system by a stepless vibrator with feeding channels. In the slicing system, the product is cut into sticks by using two knife shafts. Production capacit...

Used. Groove kernel cutting machine PEHA - Type H1-04-03-600 with approx. 600 mm working widt

• Manufacturer: PEHA

The nuts are fed through the feed hopper into the slicing system by a continuously adjustable vibrator with feed channels. In the slicing system, the product is sliced into cubes using three disc knife shafts. Ou...

almond halving machine PEHA - approx. 600 mm working width, YOM 1983.

• Manufacturer: Peha

The machine is suitable for cutting almonds and similar nuts into halves. The machine is equipped with a cutting knife and two rubber rolls.

1961 BÜNDGENS UD2

• Manufacturer: BÜNDGENS

Info: double wire processing | Cutting length: 1000 mm | Diameter range: 0,8-2 mm | Speed – meters/min: 80

1967 BÜNDGENS UD2

• Manufacturer: BÜNDGENS

Info: double wire processing | Diameter range: 0,8-2 mm | Cutting length: 1000 mm | Speed – meters/min: 80

2018 Vernet-Behringer MAG EVO 420 Cutting and Drilling System Panel Processing Center

• Manufacturer: Vernet Behringer

Cutting and Drilling System Panel Machining Center CNC Control Kjellberg HiFocus 360 Power Source Automatic Turret (750 x 400 mm with limitations) Infeed Side: Zeroing Cross Conveyor NC Feed Carriage, Laterally P...

2013 Kemet Arctronics SC/R295C Kemet Arctronics - Press Machine

Ideally suited for pressing, punching or forming processes Automation and repeatable processes

2022 Trained+ Huser Micropilot FMR60 Radar Level Sensor NEW (5x)

Suitable for demanding tanks/containers with internals NEW Goods

2018 Polystat 300S SERVITEC - Laboratory Press

Massive laboratory or technical press Hydraulic system in the substructure, closed machine housing

autosampler Waters 717+ - type.

2x WEBER DS 88 - 17D complete original process units

• Manufacturer: Weber

Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - enlarged preheating zone - all parts unused in original packing ...

Ystral jet stream mixer, Aisi 304

• Manufacturer: Ystral

Other: Clamping device, (Aisi 304 Specified shaft length from the lower half of the flange coupling to the end of the stator Top stator diameter approx. 310 mm Bottom stator diameter approx. 250 mm Total length a...