Used Machine Tools in Saxony, Germany

Pressing jaws NUSSBAUM VIEGA 357139 20 and 16 mm approx. 2 pieces

Clamping jaws NUSSBAUM VIEGA 357139 20 and 16 mm approx. 2 pieces, plastic case

HT and KG branch extensions

HT and KG branch pipes, extensions, etc., contents of the plastic case, plus plastic case

Würth H2 RLE rotary hammer

Würth H20 RLE rotary hammer, 500 W, 220 V, with chuck, no further data legible, in Würth plastic case

Construction site radio MAKITA BMR 100

• Manufacturer: Makita

Construction site radio MAKITA BMR 100, 18 V, S/N 170616E

Aluminum step ladder LAYHER approx. 2x4 rungs

• Manufacturer: Layher

Aluminum step ladder LAYHER approx. 2x4 rungs

Post Turning + Milling Tools + Drills

Batch of turning + milling tools + drills, different designs

JONGEN slip-on milling cutter

shell end mill, face milling cutter, corner milling cutter, milling head JONGEN TOOL TECHNOLOGY 90PP-050-128-6 New !

WIDIA clamp holder

• Manufacturer: Pagus

Clamp holder, tool holder, tool carrier WIDIA WIDAX 225.15.623.00 New !

SAAKE grinding spindle

Grinding spindle SAAKE UW II A CNC 1x outer taper, diameter: Ø 17 / 23 mm, length: 38 mm with thread: M28 x 1.5 Length: 15 mm Clamping nut: Internal thread: M28 x 1.5 / 1 inch V-ribbed belt pulley: Diameter: Ø 62...

SCHUNK Hydraulic expansion mandrel

• Manufacturer: Schunk

Hydraulic expansion mandrel SCHUNK FORTIS SSD-S Ø19 200160 Tool holder: Ø 7 mm, depth: 9 mm Shank diameter: Ø 19 mm, length: 100 mm Machine side: Shank diameter: Ø 23 mm, length: 30 mm As good as new !

WIDIA clamp holder

• Manufacturer: WIDIA

Clamp holder, tool holder WIDIA WIDAX HEINLEIN SK 1F ( SK1F ) 1.214.75.103 214.75.125 214 75 066 D 0I Ø 125 - 250 mm New !

GLEASON - HURTH Roller burr wheel

• Manufacturer: Gleason-Pfauter

Roller burr wheel, roller burr tool GLEASON - HURTH Ø 203 mm z = 77 1104457-1 ESW / EGW - 326735 Bore Ø 40 mm used, tested !

PAGUS clamping angle

• Manufacturer: Pagus

maximales Werkzeuggewicht (US-Standard) Bore with thread: M 24 | Mass: approximately | Dimensions: 1700 x 1400 x 2250 mm

GMN grinding spindle

Grinding spindle GMN TSAV 40 s x 208 - 6002 ( TSAV40sx208-6002 ) Tool holder / drive: Ø 11 / 13 mm, length: 15 mm ( Thread: M10 x 1.0, length: 10 mm, left-hand thread Flange: 85 x 56 x 8.5 mm, Bore: Ø 22 mm used,...

DKF grinding spindle

Grinding spindle DKF 1.8-4-4/3 TGL 4870 1x flat belt wheel: Ø 50 mm, length: 80 mm ( barrel-shaped ) 1x extended spindle shaft, diameter: Ø 28 mm, length: 125 mm with internal thread: M12 x 1.75 and guide bush, d...