Used Machine Tools in Bavaria, Germany

Trusted Seller
AK-BEND AHS 20/10
- Manufacturer: Ak-Bend
- Model: AHS 2010
- Power requirement: 7.5 kilowatt
Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bea...
Günzburg, Germany
Trusted Seller
AK-BEND AHS 40/28
- Manufacturer: Ak-Bend
- Model: AHS 4028
- Power requirement: 37 kilowatt
Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bea...
Günzburg, Germany
Trusted Seller
BURNET CFM 2100 x 4,0
- Manufacturer: BURNET
- Maximum thickness: 2 millimeter
- Power requirement: 7.5 kilowatt
Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted ...
Günzburg, Germany
Trusted Seller
AK-BEND AHS 20/04
- Manufacturer: Ak-Bend
Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bea...
Günzburg, Germany
Trusted Seller
AK-BEND AHS 30/13
- Manufacturer: Ak-Bend
- Power requirement: 11 kilowatt
Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bea...
Günzburg, Germany
Trusted Seller
1970 Kolbus HL
- Manufacturer: Kolbus
Head & Tail Banding Machine Kolbus HL
Emskirchen, Germany
Trusted Seller
WEYRAUCH SW 32 – G
- Manufacturer: WEYRAUCH
- Arm extended: 1,200 millimeter
Control: conventional - | Freight basis: Delivery ex warehouse Günzburg. | Bore capacity in steel (diameter): 32mm | Bore depth: 150mm | Arm length: max. 1200mm | Quill stroke: 150mm | Turning speeds: 100 - 2000...
Günzburg, Germany
2005 Weiler E30
- Manufacturer: Weiler
- Model: E30
- Spindle bore: 40.5 millimeter
Very good condition! Max. turning length: 750 mm | Swing diameter over bed: 300 mm | Spindle speed: 1- 4,500 rpm | Spindle hole: 40,5 mm | Spindle diameter front bearing: 70 mm | Sauter tool turret: 8x | Tailstoc...
Nördlingen, Germany
Trusted Seller
AK-BEND APK 81
- Manufacturer: Ak-Bend
- Model: APK 81
Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lu...
Günzburg, Germany
Trusted Seller
EPPLE RME 1020-2
- Manufacturer: EPPLE
Control: conventional - | Storage location: Günzburg | Sheet width: mm | Plate thickness: mm | Total power requirement: kW | Weight of the machine approx.: t | Dimensions of the machine approx.: m
Günzburg, Germany
Trusted Seller
1984 MUBEA HP 450/760
- Manufacturer: Mubea
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Hole diameter in sheet thickness: Ø 19 in 19mm | Pressure capacity max.: 45to | Weight of the machine approx...
Günzburg, Germany
Trusted Seller
ERCOLINA MB42 EDT-PLUS-M
- Manufacturer: Ercolina
- Model: MB42
- Power requirement: 1.5 kilowatt
Ausstattung: – Stahl-Biegesegment mit kleiner Aufnahme Radius 130 Durchmesser 1″1/4 = 42,4 mm – Messing-Gleitschuh für Rohrdurchmesser 1″1/4 = 42,4 mm
Günzburg, Germany
Trusted Seller
ROLLMAK ST3 220-30/6.0
- Manufacturer: ROLLMAK
- Power requirement: 2.2 kilowatt
Equipment: - Taper bending device - Swing-out top roller - Motorized up and down movement of the rear roller, Up and down movement of the lower rollers by handwheel - St-52 steel construction housing - Separate f...
Günzburg, Germany
Trusted Seller
ROLLMAK SME 140-20/4.5
- Manufacturer: ROLLMAK
- Power requirement: 2.2 kilowatt
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg. | Sheet width: 2050mm | Plate thickness: 4.5mm | Pre-bending: 4.0 | Volt: 400V | Frequency range: 50Hz | Minu...
Günzburg, Germany
Trusted Seller
2012 ERCOLINA TOP-030
- Manufacturer: Ercolina
- Model: TOP-030
Control: conventional - | Storage location: Location | Shank diameter: 50 mm | Roll diameter: 178 mm | Roll speed: 9 U/min | Engine: 1.85 kW | Machine weight.: 170 kg
Günzburg, Germany