Used Grinding Machines in Saxony, Germany

FEIN angle grinder

• Manufacturer: Fein

Angle grinder, long-neck angle grinder, compact angle grinder, low voltage tool FEIN MSfv 749 0.75 KW 12000 rpm 42 V 1AC 50 Hz used, tested, picture similar !

VEM rod grinder

• Manufacturer: VEM

Rod grinder, straight grinder, straight grinding machine VEM, GALVANOTECHNIK LEIPZIG DHS approx. 4.0 m connection cable used, tested !

FEIN straight grinder

• Manufacturer: Fein

Straight grinder, hand grinder, low voltage tool FEIN AHS1 736c 0.28 KW 4500 rpm 42 V 1AC 50 Hz used, tested ! Picture similar !

SEW hand grinder

• Manufacturer: SEW-Eurodrive

Hand grinder, flexible shaft, flexible shaft SEW S2198 used, tested ! tool dimensions 160 x 32 x 20 mm

BOSCH angle grinder

• Manufacturer: Bosch

Angle grinders, High-frequency tools, High-frequency machines BOSCH 0 602 306 001 0.95 KW 1100 rpm 265 V 200 Hz Connection cable approx. 4 m used, tested ! untested !

FEIN angle grinder

• Manufacturer: Fein

kw a -30ºc/+40ºc Grinding wheel diameter: Ø 125 mm | Internal diameter: Ø 22.2 mm | Spindle thread: M14 x 2.0 | Dimensions ( without cable ): 565 x 135 x 100 mm

OFD measuring control for grinding machines

Measuring control for grinding machines OFD Feinmess Dresden, STEINMEYER MS1 / SG601 Electronic measuring control: MS1 Modular measuring control unit: SG601 used, tested !

VEM double grinding block

• Manufacturer: VEM

Double grinding bench with protective disk and table VEM BS 3-200 0.5 kW 2850 rpm 220 / 380 V including the following grinding wheels used, tested !

GEORG MEINDEL Grinding head

• Manufacturer: GEORG MEINDEL

Grinding head GEORG MEINDEL , GM Motor: AEG DA020/2 0,22 kW 2800 rpm 220 / 380 V 3AC 50 Hz used, tested !

VEM double grinding block

• Manufacturer: VEM

Double grinding block VEM SEWStNa40SENa350 Wheel diameter Ø 350 / 350 mm wheel width 63 / 40 mm with cooling device 1.5 kW 3000 rpm 220 / 380 V

VEM double grinding block

• Manufacturer: VEM

Double sanding block, brush deburring machine, deburring machine VEM, ELBTALWERK SEWStN40SEN350 Wheel diameter Ø 350 / 350 mm wheel width 63 / 40 mm with one wire brush ! 1,5 kW 1500 rpm 220 / 380 V used, tested !

FEMINA grinding spindle

• Manufacturer: FEMINA

Grinding spindle FEMINA 2.8-5 TGL 4870 ( TGL4870 ) used, tested !

PAGUS grinding spindle

• Manufacturer: Pagus

Grinding spindle PAGUS Ø 40 x 125 mm used, tested !

FEMINA grinding spindle

Grinding spindle FEMINA 1.10-5-4/1 TGL 4870 1x external taper 1:6, diameter: Ø 38 mm, length: 54 mm with internal thread: M16 x 2.0 and guide bush, diameter: Ø 18 mm, length: 10 mm 1x flat belt wheel: Ø 63 mm, le...

DKF grinding spindle

Grinding spindle DKF 1.10-5-4/1 TGL 4870 1x external taper 1:6, diameter: Ø 38 mm, length: 54 mm with thread: M25 x 1.0 length: 12 mm 1x extended spindle shaft, diameter: Ø 38 mm, length: 160 mm with internal thr...