- Trusted SellerAuction
Gauting, GermanyVisit Auction Website 1981 Swivel bending machine RAS 64.25
- Manufacturer: RAS
Used RAS motor-driven bending machine, with foot switch, simple control up to 6 bending angles, adjustable potentiometer, manual bending jaw lowering. The machine will be professionally repaired, inspected, and...
Hohenbrunn, Germany- Trusted Seller
Banding machine, pallet labeling
- Manufacturer: AETNA Group
Additional title: Roboband / Logomatic | Capacity: 150 paletts / h | Power: 5,5 kW | Current: 10 A | Voltage: 400 Volt | Frequency: 50 Hz | Weight: 1700 kg
Freising, Germany 2021 Schechtl MAF 400 swivel bending machine
- Manufacturer: Schechtl
Used Schechtl swing bending machine with the following equipment: - 1 sharp guide bar 20°, offset, 1 mm radius for the upper beam - 1 insert rail each 10/100 mm and 24/100 mm for the bending beam - 2 foot switc...
Hohenbrunn, Germany- Trusted SellerAuction
Gauting, GermanyVisit Auction Website - Trusted SellerAuction
Gauting, GermanyVisit Auction Website - Trusted SellerAuction
Crimping pliers DCM MH860
- Manufacturer: DCM
Gauting, GermanyVisit Auction Website - Trusted SellerAuction
Crimping pliers DCM AFM8
- Manufacturer: DCM
Gauting, GermanyVisit Auction Website - Trusted SellerAuction
Gauting, GermanyVisit Auction Website - Trusted SellerAuction
Crimping pliers DCM GS222
- Manufacturer: DCM
Gauting, GermanyVisit Auction Website - Trusted SellerAuction
Crimping pliers DCM AFM8
- Manufacturer: DCM
Gauting, GermanyVisit Auction Website - Trusted SellerAuction
Gauting, GermanyVisit Auction Website - Trusted SellerAuction
Crimping pliers (HT00178-002) Phoenix Contact
- Manufacturer: Phoenix Contact
SN: 118759, w. 8 inserts, in case
Gauting, GermanyVisit Auction Website 2023 Swing-Bending Machine SCHECHTL LBX310
- Manufacturer: Schechtl
used Schechtl manual shearing/bending machine, with manual stop 500mm, Year of manufacture: 2023/New/Showroom model with signs of use Machine is repaired, tested, cleaned by a specialist and then fully functional...
Hohenbrunn, Germany2002 Long bending machine Thalmann Pico 150-6.2
- Manufacturer: Thalmann
- Power requirement: 3 kilowatt
Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...
Hohenbrunn, Germany
Tip: Enter manufacturer, model or keyword
