Used Turret Lathes in Vermont, USA

Warner & Swasey 3A

• Manufacturer: Warner & Swasey
• Model: 3A

Manual Turret Lathe -EQUIPPED WITH- Cross Slide Independent Apron/Saddle Secondary Coolant Reservoir 4-Jaw Chuck

1955 Bullard MAN-AU-TROL 54

• Manufacturer: Bullard
• Model: 75

Manual Vertical Turret Lathe Table diameter: 54" | Max swing (w/o side head): 62" | Max swing (with side head): 58" | Max height under rail: 44" | Rail adjustment: 32" | Table speeds: 3.3 - 120 RPM | Table height...

VDF 32X6

• Manufacturer: VDF - Boehringer

Manual Turret Lathe -EQUIPPED WITH- Turret Stations complete with Drilling bars, as currently mounted: Station 1: Jacobs Chuck w/ Center Drill Station 2: Drilling Bar for 2” to 2.875” Spade at 49” Deep Station 3:...

1924 Bullard NEW ERA 42

• Manufacturer: Bullard

Manual Vertical Turret Lathe Table size: 42" | Max swing: 44" | Work height under rail: 43" | Table motor: 30 HP | Table speed: 100 RPM | Number of turret positions: 5 | Side head: Yes | Machine weight: 20,000 LBS

1964 Webster & Bennett 36 EV

• Manufacturer: Webster & Bennett

Manual Vertical Turret Lathe Table diameter: 42" | Max swing: 52" | Max height under ram: 40" | Table speeds: 13.5 to 300 RPM

1974 Berthiez BM-180

• Manufacturer: Berthiez

Manual Vertical Turret Lathe Equipped With- 72" Chuck Side Head Turret Head DRO's on Both Axes no Pit required Two Spade Machinery LLC 62 Highland View Bellows Falls VT 05...

2011 Gray RINGMASTER 60

CNC Vertical Turret Lathe -EQUIPPED WITH- Machine retro to CNC in 2011 Fanuc 21iT CNC Control 5-Station Tool Turret Chip Conveyor

1990 Motch 225D-VNC

CNC Vertical Turret Lathe -EQUIPPED WITH- Chip Conveyors (2) CNC Controls (2) 21" 3-Jaw Chucks (2) 6 Station Tool Turrets

1976 Sundstrand V12

• Manufacturer: Sundstrand

CNC Vertical Turret Lathe -EQUIPPED WITH- 46"Table Mounted With 60" Faceplate 5 Station Turret Table Guards ***Retrofit To Fanuc Control Done 1994***

2006 Gray RM-48

CNC Vertical Turret Lathe **Retrofitted With Fanuc CNC Control in 2006**

1975-2012 Gray 48

CNC Vertical Turret Lathe -EQUIPPED WITH- Threading High/Low Power Chucking

2006 YouJi YV-500E

CNC Vertical Turret Lathe Control: Fanuc Oi-TC | Max swing diameter: 29.5" | Max cutting diameter: 21.6" | Max cutting height: 19.6" | X axis travel: -1.9"+16.9" | Z axis travel: 23.6" | Spindle speed: 50-2,000 R...

2011 Gray VFR

CNC Vertical Turret Lathe -EQUIPPED WITH- Fanuc OT CNC Control 2011 CNC Retrofit 42" 3-Jaw Chuck 5 Station Turret Spindle rpm: Low: 5-164 / High: 164-488

1984 O-M TM2-10N

CNC Vertical Turret Lathe -EQUIPPED WITH- Updated Quantum 3 Spindle Controller Rebuilt Spindle Motor 220 Volt Power Full Guarding Ball Screws Coolant

Ex-Cell-O X-1100

• Manufacturer: Ex-Cell-O

CNC Vertical Turret Lathe -EQUIPPED WITH- Air Conditioner for Electrical Cabinet Full C-Axis Thru Spindle Coolant (live tools) Spindle Orientation Electric Torque Limit Complete splash guards ***THIS MACHINE IS A...