Pistorius Threaded Adjusting Saw Head Control Rod with Bushings, HD, Milled, Threaded Steel Rod
new
- Manufacturer: Pistorius
Pistorius Threaded Adjusting Saw Head Control Rod with Bushings in White This is the entire Saw Head Control Rod with opposed threaded adjustment which includes the two female threaded inserts, opposed threaded ...
$650 USDSheboygan, WI
Roll-In Saw TF1420 Tilt Frame Pneumatic Feed Vertical Bandsaw
used
- Manufacturer: Roll-In
- Model: TF1420
Roll-In Pneumatic Feed Tilt Frame Vertical Bandsaw 220V, 3 ph @ 60 Hz Model #: TF1420 Throat: 14" Cutting Capacity at 90°: Round: 14" / Rectangle: 14" x 20" Table Size: Precision Ground Cast Iron Table: 32 1...
350 MM Startrite 14" Semi-Automatic Cold Saw CP350SA w/Extra Blades
used
- Manufacturer: Startrite
Startrite Semi-Automatic Cold Saw Will Need Some Repairs as Shown Blade Size: 14" (350MM) Extra Blades Included Mitre Capability: 45* Model #: CP350SA S/N: 4274 Voltage: 440V, 3 ph @ 60 Hz
$3,950 USDCedarburg, WI
Sawstop ICS51230-36, 10" Industrial Table Saw, 36" Fence and Rails, 5HP, Single Phase, 230V
new
- Manufacturer: SawStop
Sawstop ICS51230, 10" Industrial Table Saw, 36" Fence and Rails, 5HP, Single Phase, 230V Drop shipping included in price. The SawStop® Industrial Cabinet Saw is the definition of industrial grade. It is the hea...
Delta RT-31 Table Saw, 10" Blade, 12" without scoring, 5HP, 3PH, 52" Fence
used
- Manufacturer: Delta
Delta RT-31 Table Saw, 10" Blade, 12" without scoring, 5HP, 3PH, 52" Fence To be Cleaned and checked 10” Tablesaw with scoring 5-HP 230 volt 3PH 52” fence extension legs
$2,595 USDSheboygan, WI
Powermatic 66 Table Saw Drive Belts, Set of Two, Replaces part 6077225
new
- Manufacturer: Powermatic
Powermatic 66 Table Saw Drive Belts Set of two cogged belts for the newer 2-belt drive system Powermatic part #: 6077225 Shipping is included to US addresses for this item.
$25 USDSheboygan, WI
Hydmech Auto Horizontal Band Saw Model S-20A
used
- Manufacturer: Hydmech
- Model: S20A
2017 Hydmech Auto Horizontal Band Saw Model S-20A Single direction manual mitering up to 30 degrees Full Capacity Overhead bundling Mist lubrication
Waukesha, WI
Rockwell/ L'invincible, Short Stroke 5' Sliding Table Saw - Model SI 15F, 7.5HP, 3PH, Scoring
used
- Manufacturer: Rockwell
- Model: SI 15F
SCMI Sliding Table Saw - Model SI 15F Will be cleaned, checked, in good running condition This used sliding table saw manufactured by SCMI features a 10" wide x 53-1/2" long sliding table section. Technical Sp...
$2,495 USDSheboygan, WI
Tannewitz Model U Table Saw, 1942, 16" Blade Capacity, 4" Blade projection, 5HP, 3PH, Cleaned, Checked
used
- Manufacturer: Tannewitz
Tannewitz Model U Table Saw, 1942, 16" Blade Capacity, 4" Blade projection, 5HP, 3PH, Cleaned, Checked Cleaned and checked, video made 5HP 240/460 V 3PH Manufacturer's specs: 16" blade capacity 4" blade proj...
$995 USDSheboygan, WI
Whirlwind 212L or 212R Refurbished Upcut Saw, 4" x 10" stock capacity, 18" blade, 10HP, 3PH Motor
refurbished
- Manufacturer: Whirlwind
Whirlwind 212L or 212R Refurbished Upcut Saw, 4" x 10" stock capacity, 18" blade, 10HP, 3PH Motor - Specifications: • From 4" x 10", 2" x 12" to 1" x 13" cap., designed to accept an 18" dia. blade with 1" bore, ...
Magic 3.2 Sliding Table Panel Saw, 10ft cap., Scoring, 230V, 3PH, New Belts, Bearings
refurbished
- Manufacturer: Magic
Magic 3.2 Sliding Table Panel Saw, 10ft cap., Scoring, 230V, 3PH, New Belts, Bearings Saw is in very good operating condition and is complete. Thoroughly cleaned and checked, video made. New belts and bearings ...
$4,500 USDSheboygan, WIBehringer Dual Column Horizontal Band Saw 47.2″ x 20″
used
- Manufacturer: Behringer
2013 47.2″ x 20″ Behringer Dual Column Horizontal Band Saw HBP510-1208GA Standard Specifications: Capacity, 90° round 20″ (510 mm) Capacity, 90° square 20″ x 20″ (510 mm x 510 mm) Capacity, 90° flat 47.2″ x 20″ (...
Waukesha, WI
MG EMMEGi TYPE# 350, 14" Abrasive Chop Saw, Motor: 1.2 KW, 230/460V, 3 PH, 60 Hz
used
- Manufacturer: Emmegi
- Model: 350 S
MG EMMEGi 14" ABRASIVE CHOP SAW TYPE/MODEL: 350 S MOTOR: 1.2 KW (Approx. 3 Hp), 230/460V, 3 PH, 60 Hz (Motor I.D. plate states 230V but the Machine I.D. Plate states 460V. We assume the motor is Dual wound?
$650 USDCedarburg, WI
Delta 50A 12" Radial Arm Saw, 5HP, 3PH, with Infeed and Outfeed Tables
used
- Manufacturer: Delta
Delta 50A 12" Radial Arm Saw, 5HP, 3PH, with Infeed and Outfeed Tables
$2,000 USDWisconsin, USA
Cantek Upcut Saw PCS18 Replacement Belt Set of 3
new
- Manufacturer: Cantek
Cantek Upcut Saw PCS18 Replacement Belt Set of 3 Shipping is included for this set
$80 USDSheboygan, WI
Kasto GKS400AU1200 Saw
used
- Manufacturer: Kasto
- Model: GKS400AU1200
- Weight: 18 tonnes available
Good condition Kasto GKS400AU1200 Saws manufactured in 1988. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
