- Trusted Seller
Brown Master 10" Manual Cold Cut Miter Metal Saw 850/1700RPM 460V 3Ph
used
- Manufacturer: Brown Master
Used, in Good Working Condition. Tested. Looks like it was setup to run with an automation system. No handle no clamp for material. Motor is 460V only. Looks to be 2 speed. 850-1700 rpm. 10" blade. Almost looks l...
$775 USDMillersburg, IN - Trusted Seller
Cut Off Abrasive Metal Saw 18" Blade 2485RPM Cast Iron Base 7.5Hp 230/480V Chop
used
Used, in Good Working Condition. Model 18 No brand. Made in Japan. 18" Blade. Made for abrasive blade. Looks like they were cutting aluminum with a carbide blade. Can cut angles. Cast iron base. This has a brake ...
$1,075 USDMillersburg, IN - Trusted Seller
Omga T521ST 18-20" Wood Cut Off Saw 5.6kw Upcut Pneumatic Control 230/460V 3Ph
used
- Manufacturer: Omga
Used, in Good Working Condition, Tested OK. This is for a 18" blade but 20" blade is optional. This unit comes with a 500mm blade which is basicly a 20" blade. Pneumatic foot pedal to activate cutting. 12-5/8" cr...
- Trusted Seller
Delta 34-803 Unisaw Table Saw 10" Tilting Arbor 3Ph 3 HP 240/480V 57" Fence
used
- Manufacturer: Delta
Used, in Good Working Condition. Removed From a Working Environment Tested. 3 phase wired for 460V. Blade guard has some defects. Fence is setup for 57" max. Extension rods to make it 57" Shipping length could be...
$1,350 USDMillersburg, IN - Trusted Seller
Omga T521ST 18-20" Wood Cut Off Saw 6 Hp Upcut Pneumatic Control 230/460V 3Ph
used
- Manufacturer: Omga
Used, in Good Working Condition, Tested OK. This is for a 18" blade but 20" blade is optional. This unit comes with a 20" blade. Pneumatic foot pedal to activate cutting. 12-5/8" cross cut max. This is for straig...
- Trusted Seller
Powermatic Model 66 Table Saw 10" Tilting Arbor 3 Phase 5 HP 240/480V 52" Fence
used
- Manufacturer: Powermatic
- Model: MODEL 66
Used, in Good Working Condition, Tested. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,300 USDMillersburg, IN 
Morgan Chop Saw
used
- Manufacturer: Morgan
Good used Morgan Chopsaw, feeds from right to left. Ready to cut.
Southern Indiana, IN, USA- Trusted Seller
Everett 16-MIT Cut Off Abrasive Metal Saw 16" Blade Exhaust Blower 10Hp 3210RPM
used
- Manufacturer: Everett
Used, in Good Working Condition, Tested. This is a working cut off saw. 16" blade. 230/460V 10 Hp main motor. Has a blower motor. 1 hp motor with a 16" centrifugal fan. Inside of cabinet is rusting through the bo...
$1,760 USDMillersburg, IN - Trusted Seller
Sampson SC Metal Cut Off Chop Saw 3500RPM 12" Blade 3Hp 230/460V Aluminum
used
- Manufacturer: Sampson
Used, in Good Working Condition. Removed From a Working Environment. This was used to cut aluminum. This is wired for 460V. Blade is carbide. The RPMs are close to 3500. Foot pedal operator. Air cylinder to cycle...
$1,750 USDMillersburg, IN - Trusted Seller
LeTarte EM11KA Aluminum Double Miter Saw 1.5HP Motors Dual Blades 230/460V 3Ph
used
- Manufacturer: LeTarte
Used, in Good Working Condition, Tested OK. 11" and 10.5" blades. Wired for 230V. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,620 USDMillersburg, IN - Trusted Seller
Delta Rockwell Vintage Radial Arm Saw 12" Blade 3Hp Motor 20" Rip 230/460V 3Ph
used
- Manufacturer: Rockwell
Used, in Working Condition, Tested OK. This saw does not come with a bench top. This saw is wired for 480V. Motor can be wired for 220/440V. 1" arbor No all adjustments are free. Main ones are. If this item ships...
$1,000 USDMillersburg, IN - Trusted Seller
CTD F255 Straight Cut off Chop Saw 10" Blade 3450RPM 3Hp 3Ph Aluminum Metal
used
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. Hand operator. Both hands have to be used to operate. Has oiler for the blades. Blade is 10". 3 hp motor. 230/460V. Wired for 480V. If this item ships as Flat Rate Frei...
$1,080 USDMillersburg, IN - Trusted Seller
Lincoln LAC-B2 Lincolnweld 5/32" SAW Submerged Arc Welding Wire 630lb (2) Drums
used
- Manufacturer: Lincoln
New Surplus. Lot of 2 Partial Barrels. (1) 500 Lb (1) 130 Lb - 630 Lb Total 5/32" Submerged Arc Welding Wire. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,440 USDMillersburg, IN - Trusted Seller
Lincoln LAC-B2 Lincolnweld 5/32" SAW Submerged Arc Welding Wire 600lb Feed Drum
used
- Manufacturer: Lincoln
New Surplus. 5/32" Submerged Arc Welding Wire. Unopened Barrel. 600 Lbs. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,520 USDMillersburg, IN - Trusted Seller
Lincoln LAC-B2 Lincolnweld 3/32" SAW Submerged Arc Welding Wire 600lb Feed Drum
used
- Manufacturer: Lincoln
New Surplus. 3/32" Submerged Arc Welding Wire. 600 Lb Barrel. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,520 USDMillersburg, IN 
DoAll 1612-1 Saw
used
- Manufacturer: DoAll
- Model: 1612-1
Good condition DoAll 1612-1 Saws manufactured in 1968. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
