- Trusted Seller

2019 Loewer BMK4TD 53" Belt Sander
- Manufacturer: Loewer
Features: Abrasive Belt for Sanding /Deburring with Infinitely Variable Belt Speed Two Disc Units on the Infeed Side, Two Disc Units on the Outfeed Side Oscillation Across the Entire Belt Width Hazdust Wet Dust C...
Melville, NY 
Whirlwind 855 Oscillating Edge Sander
- Manufacturer: Whirlwind
- Model: 855
Used Whirlwind 855 Oscillating Edge Sander 7.5HP 3PH
$6,500 USDDundee, NY
Laguna, SS|24 Spindle Sander
- Manufacturer: Laguna
Laguna’s SS|24T Spindle Sander is a versatile sander that comes standard with a stand, 6 inserts, and 8 spindles. Features: Motor: 110 V, 1 HP, 1,725 RPM, 10 amp Oscillations/Minute: 71 Oscillation Stroke: 1-...
Dundee, NY
Ormel-Wagner 8” Belt Sander on Bench
- Manufacturer: Wagner
Return To: Sanders Hp: 2 Equipped With: Heavy Bench, Extra Belts Good Condition
$1,200 USDRochester, NY
Laguna PS2 Profile Brush Sander
- Manufacturer: Laguna
The PS2 Profile sander is a 220 Volt Single Phase workhorse. Features include two brush sanding stations which can be used by two operators at the same time. The machine is a variable speed (RPM) brush sander, wh...
Dundee, NY
Laguna PS3 Profile Brush Sander
- Manufacturer: Laguna
The PS3 Profile sander is a 220 Volt Single Phase workhorse. Features include two brush sanding stations which can be used by two operators at the same time. The machine is a variable speed (RPM) brush sander, wh...
Dundee, NY
Laguna PS1 Profile Brush Sander
- Manufacturer: Laguna
The PS1 Profile sander is a 220 Volt Single Phase workhorse. Features include two sanding stations which can be used independently or at the same time with two operators. One station is a sanding belt over a roll...
Dundee, NY
Larick 6000 Series Brush Sander
- Manufacturer: Larick
The LARICK 6000 Series machine will brush sand and/or wire brush parts with standard widths of 25, 37 and 49 inches. It has 2 to 6 spindles which will accommodate sanding or wire brushes up to 14 inch diameter an...
Dundee, NY
Laguna, 6|89T Edge Sander
- Manufacturer: Laguna
Laguna’s 6|89T Edge Sander is a horizontal/vertical sanding machine with swing function of the sanding belt. It features a 10” x 12” end table with dust shroud, a footprint of only 51” x 20” x 45”, and a belt spe...
Dundee, NY
Kar-Ry 1” Sander Machinist Mate
Return To: Sanders Horsepower: ½ Phase: Single Adjustable Throat Roller Cabinet Good Condition
$1,650 USDRochester, NY
Northtech NT-ES948DE Edge Sander
- Manufacturer: Northtech
- Phase type: Three-phase
Northtech offers a large family of industrial-grade edge sanders. The NT-ES948DE falls into the middle of the family of edge sanders with a 9″x48″ sanding area on both sides of the machine along with an end table...
Dundee, NY
Max VS-1 Oscillating Spindle Sander
- Manufacturer: Max
Table size 24″ x 24″ Table height 39″ Spindle speed 1725 rpm Oscillations per minute 75 Length of oscillation 1 1/2″ Net weight 320 lbs
$1,500 USDDundee, NY
Laguna, Pro 37″ Widebelt Sander
- Manufacturer: Laguna
This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensio...
Dundee, NY
Northtech NT-RRS80B Round Rod Sander
- Manufacturer: Northtech
- Phase type: Three-phase
The NT-RRS80B is a single head heavy duty sander specifically designed for round rods. It is a heavy duty industrial grade sander that rolls the part against the sanding belt as it is fed through the machine. Var...
Dundee, NY
Laguna, Pro 43″ Widebelt Sander
- Manufacturer: Laguna
This machine is equipped with 1 ( 8”) roller and a second (4”) roller followed by a wide platen for a fine finish. This allows you to use a rougher grit on the first roller (8”) that will absorb most of the impac...
Dundee, NY
Denray 2872 Sander
- Manufacturer: Denray
- Model: 2872
Good condition Denray 2872 Sanders manufactured in 2022. Located in USA and other countries. Click request price for more information.
USA

