Okuma-Howa 6VA- Vertical Machining Center 27 x 79 Travel
used
- Manufacturer: Okuma
- Spindle Taper: CAT 50
- Control: CNC
“Amazing condition, well maintained” Due to eBay's policies on shipping and receiving funds, all customers are responsible for setting up freight shipping. 1.1 Specifications of Machines (MILLAC 6VA)
- Trusted Seller
2008 KAFO CNC VERTICAL MACHINING CENTER, MODEL #: VMC-21100, S/N: 035288 #85737
used
- Spindle Taper: 50
EQUIPPED WITH: * FANUC SERIES 18-M CONTROLS * CAT 50 TAPER TOOLING * HUOT TOOL CART * COLLECTS
Ames, IA - Trusted Seller
Milltronics Vertical Machining Center RH19
used
- Manufacturer: Milltronics
- Model: RH19
- Spindle Taper: 40 taper
- Control: Milltronics Centurion 7
Equipped with: Splash guards Automatic lubrication Drilled and tapped fixture on table
- Trusted Seller
2007 Johnsford DMC 4100PH CNC Double Column Machining Center
used
- Manufacturer: Johnsford
- Spindle Taper: 50
- Control: Fanuc 18I-MB Color Control
Model: DMC 4100PH | Power: Main Motor - 54 HP | X-axis travel: 161.4" | Y-axis travel: 90.5" | Z-axis travel: 31.5" | Rapid traverse rate - x / y / z: 472 in/min. | Table-width: 80.7" | Table-length: 165.3" | Sp...
Iowa, USA Amera Seiki A-5 - CNC Vertical Machining Center
used
- Manufacturer: Amera-Seiki
- Model: A-5
“Was under power when purchased, missing way covers” Due to eBay's policies on shipping and receiving funds, all customers are responsible for setting up freight shipping. Amera Seiki A-5 Features: Fanuc 0iMB CNC...
- Trusted Seller
2007 Yama Seiki Vertical Machining Center VMB-1400 (50)
used
- Manufacturer: Seiki
- Spindle Taper: #50
- Control: Optional Fanuc 18i-mb
Equipped with: Chip auger Coolant through spindle Chip conveyor Box bed ways Oil cooler 39.5” x 72” drilled and tapped bed plate Air conditioned cabinet Full enclosure Auto lubrication
- Trusted Seller
2001 Haas VF-8 Vertical Machining Center VF-8
used
- Manufacturer: Haas
- Model: VF-8
- Spindle Taper: CAT40
Equipped with: Thru spindle coolant Manual pulse generator Brushless servos High speed machining Programmable coolant Quick code Rigid tapping Chip auger Manuals and backup disc
- Trusted Seller
1995 Haas VF-3 Vertical Machining Center VF-3
used
- Manufacturer: Haas
- Model: VF-3
- Spindle Taper: CT40
Equipped with: Chip auger 20 station umbrella tool changer Automatic lubrication Work lights Wired for 4th axis Nitrogen counter balance 15 HP high torque motor Air conditioned cabinet
- Trusted Seller
LEADWELL V-42AF 3 Axis Vertical Machining Center V-42AF
new
- Manufacturer: Leadwell
- Model: V42AF
- Spindle Taper: CAT 40
- Control: Fanuc Oi-MF Plus
Control type: Fanuc Oi-MF Plus | X axis travel: 39.37" | Y axis travel: 20.47" | Z axis travel: 24.02" | Table size: 43.31" x 19.69" | Mass of workpiece: 17,641 LBS | Spindle speeds: 10,000 RPM | Maximum spindle...
- Trusted Seller
2000 Haas VF-4 APC Vertical Machining Center VF-4 APC
used
- Manufacturer: Haas
- Model: VF-4
- Spindle Taper: CAT40
Equipped with: Automatic pallet changer Brushless servos Chip auger 1 MB extended memory Programmable coolant Quick code 4th axis ready Macros Coordinate scale Rigid tap USB port
Okuma Howa Vertical Machining Center, Millac 65V, X-79", Y-29", Z-22", 6500 RPM, 15 HP, Fanuc 15M
used
- Manufacturer: Okuma
- Model: MILLAC
- Spindle Taper: Cat 50
- Control: Fanuc 15M
X-travel: 79" | Y-travel: 29" | Z-travel: 22" | Table size: 29" X 94" | Table capacity: 4500 lbs. | Spindle drive: 15 HP | Spindle taper: Cat 50 | Spindle speed: 20-3600 | Automatic tool changer: 30 Tools | Cont...
Iowa, USA
2000 Okuma Horizontal Machining Center, MA 60HB, 630mm Pallet, 60ATC, X-39.5", Y-35.4, 35 HP, 12000 RPM, OSP U100M, ID17656
used
- Manufacturer: Okuma
- Model: MA-60HB
- Spindle Taper: No 50
2000 Okuma Horizontal Machining Center, MA 60HB, 630mm Pallet, 60ATC, X-39.5", Y-35.4, 35 HP, 12000 RPM, OSP U100M, ID17656 .
Iowa, USA
2008 Amera Seiki Vertical Machining Center, Model A5, 30" X 64" Table, X-63", Y-31", 30 HP, 7500 RPM, Fanuc OiMB Control
used
- Manufacturer: Amera-Seiki
- Model: A-5
2008 Amera Seiki Vertical Machining Center, Model A5, 30" X 64" Table, X-63", Y-31", 30 HP, 7500 RPM, Fanuc OiMB Control
Iowa, USA
Komo Vertical Machining Center, Model 40/240, X Travel 240", Y Travel 24", Z Travel 24", 10,000 RPM, 20 HP, Fanuc CNC
used
- Manufacturer: Komo
- Model: VMC 40240
- Spindle Taper: CT 40
Atc: 30 | Spindle taper: CT 40 | X-axis travel: 240 | Y-axis travel: 24 | Z-axis travel: 23 | Spindle speed max: 10,000 RPM | Spindle motor (cont. / 30 min): 20 / 15 HP
Iowa, USA
HAAS Horizontal Machining Center, EC 2000, X-84", Y-40", Z-32", Table 36" X 84", 30 HP, 6000 RPM, Built In Rotary Table, HAAS CNC
used
- Manufacturer: Haas
- Model: EC-2000
- Spindle Taper: Cat 50
- Control: HAAS CNC
X-travel: 84" | Y-travel: 40" | Z-travel: 32" | Number of pallets: 1 | Pallet size: 36" X 84" | Pallet index: 360,000 | Spindle drive: 30 HP | Spindle speed: 6000 RPM | Spindle taper: Cat 50 | Automatic tool cha...
Iowa, USA
Milltronics RH20 Machining Center
used
- Manufacturer: Milltronics
- Model: RH20
Good condition Milltronics RH20 Machining Centers manufactured in 2001. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
