- Trusted Seller
1995 2,300 x 6,000mm Ravensburg KVH 4-1800 10-Axis
- Manufacturer: Ravensburg
Additional information: 1.) Additional general specs Center height over floor 1650 (2300)mm Center height over bedways 1520mm Min. Distance between centers 1000mm Admissible workpiece weight unsupported (s=300mm)...
Rockville Centre, NY - Trusted Seller
1,250mm dia x 12 mtrs long Kramatorsk 1M660F2
- Manufacturer: Kramatorsk
Some additional information is as follows: Rapid tailstock movement, 3380 mm/min Rapid support movement, 4 M/min Still installed and under power Very Good working condition
Rockville Centre, NY - Trusted Seller
27" x 120" Lehmann Hollow Spindle Manual Lathe
- Manufacturer: Lehmann
- Spindle bore: 307.34 millimeter
Features: Front & Rear 24" 4-Jaw Chucks w/ 12.1" Hole Taper Attachment Threading Equipped With: Front & Rear 24" 4-Jaw Chucks w/ 12.1" Hole Taper Attachment Threading Coolant Tank Chip Pan
Melville, NY 
LeBLOND Engine Lathe : Regal 1963 15×40 cc
- Manufacturer: Regal
15” Swing Over Bedways 9” Swing Over Cross Slide Hardways Inch Threading Taper Attachment Spindle Speeds from 45 to 1800 RPM 1.5” Spindle Bore 3-Jaw Chuck Toolpost Chip Pan 5 HP 220/440 Volt Electrics S/N: 4C874 ...
- Trusted Seller
Noble & Lund 108" x 348" Heavy Duty Engine Lathe
- Manufacturer: Lund
Equipped With: 4-Jaw Chuck Variable Speed Drive For Saddle Feeds Power Tailstock & Quill Updated Electrics Steady Rest
Melville, NY 
Harrison’s 600 15” x 60” Engine Lathe
- Manufacturer: Harrison
10” 3 Jaw Chuck (Prett Burnard) Coolant Tooling Model M350 Center Lathe (check this out) Swing: 15” Volts: 230; Ph: 3; Hz: 60 AMPS: 20.2; Hp: 7.5 Equipped With: Anialam (wizard Lathe) 2 axis DRO Goos Condition
- Trusted Seller
1995 Mackintosh-Hemphill 125" x 629" 3-Way Bed Engine Lathe
- Manufacturer: Mackintosh
Features: Machine was Fully Retrofit in 2012 Fanuc 21i CNC Control Equipped With: Fanuc 21i CNC Control 110.23" Face Plate 3-Way Bed Design
Melville, NY 
Rochester, NY- Trusted Seller
Package Of Lathe Boring Bar Holders & Boring Bars
Features: (2) Boring Bar Holders (14) Boring Bars BORING BAR HOLDERS:: (1) 1.5" & 2.5" Combination Boring Bar Holder (1) 4.5" Boring Bar Holder LONG BORING BARS: (1) 2.5" x 34" (1) 1.5" x 22" (1) 4.5" x 48" (1) 4...
Melville, NY 
LeBlond Heavy Duty Engine Lathe 1610 20″ x 60″
- Manufacturer: Leblond
Capacity: Swing Over Bed and Carriage Wings: 20-1/2″ Swing Over Compound Rest: 12-7/8″ Distance Between Centers: ...
TOS SN55B-71B
- Manufacturer: TOS
Country: Canada | Tos sn55b-71b 28'' x 130'' gap bed engine lathe with 15'' 4-jaw chuck, threading, speeds to 1,000 rpm, steady rest & follow rest, newall dp700 dro, sn: 071375314
Syracuse, NY
TOOLMEX TUR 630A
- Manufacturer: Toolmex
- Spindle bore: 139.7 millimeter
Imperial Metric Country: Canada | Tur 630a hollow spindle lathe: Spindle 5.78", Front Chuck 5.5", Rear Chuck 4.9", 24.8" Swing Over Bed, 14.9" Over Cross Slide, 118.1" Distance Between Centers, Spindle Speeds to ...
Syracuse, NY- Rochester, NY
AFM TUG 40X2000
- Manufacturer: AFM
- Spindle bore: 52 millimeter
Imperial Metric AFM lathe TUG 40 x 80" Swing: 450 mm | Centers: 2,000 mm | Spindle bore: 52 mm | Power: 5.5 kW
Syracuse, NY
TOS SN 71C
- Manufacturer: TOS
- Model: SN 71C
- Spindle bore: 76.19999999999999 millimeter
- Power requirement: 7.06 kilowatt
Imperial Metric TOS SN 71 C 3000MM ENGINE LATHE, NEWALL NMS300 DRO SPECIFICATIONS: TAILSTOCK QUILL ADJUSTMENT:: 290 MM
Syracuse, NY
Haas CL-1 Lathe
- Manufacturer: Haas
- Model: CL-1
Good condition Haas CL-1 Lathes available between 2005 and 2010 years. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword