Used Lathes in New Jersey, USA

Ikegai 25×120″ Lathe with Taper

• used

• Manufacturer: Ikegai

Ikegai 25×120″ lathe with taper attachment, 3 and 4 jaw chucks, tailstock chuck and live center and steady rests.

Leblond 20″ x 156″ Lathe with Taper

• used

• Manufacturer: Leblond

Leblond 16 Heavy Duty Lathe 20″ x 156″ Actual Swing 20 1/2″ Distance Between Centers 156″ Spindle Hole 1 3/4″ Taper Attachment Steel Steady Rest with Roller Jaws Toolpost & Holders There is no compound on the car...

Clausing 10″ x 30″ Lathe in/mm

• used

• Manufacturer: Clausing

Clausing 10″ Model 1030 “Industrial & Training Lathe” Swing Over Bed- 10″ Swing Over Slide- 6″ Spindle Nose- D1-3 Spindle Bore- 1 3/8″ Motor- 1.5 hp 230/460 3ph Speeds (9) 40-2240 rpm Threading- inch & Metric Tai...

Large Lathe Steady Rests 60″ Swing

• used

Large Lathe Steady Rests for 60″ or Larger Swing Bottom to Centerline of Rest 29 1/2″ Center Hole 27 3/4″ Max Shaft Diameter with Current Jaws 16″ Bearings 5″ Diameter 2 3/4″ Width Base of the Complete Rest 17 3/...

1994 Fortune Model S20120 Engine Lathe

• used

• Manufacturer: Fortuna
• Spindle Bore: D1-8 Camlock / 3.125"
• Spindle Nose: D1-8 Camlock / 3.125"

Acu-Rite Digital Readout Tailstock Tool Post 12" 6 Jaw Chuck Work Light Swing Down Chuck Cover Carriage Stop Thread Dial Indicator Foot Break Coolant System with Removable Chip Pans & Pump Hardened & Gr...

1994 Fortune Model S20100 Engine Lathe

• used

• Manufacturer: Fortuna
• Spindle Bore: D1-8 Camlock / 3.125"
• Spindle Nose: D1-8 Camlock / 3.125"

Acu-Rite Digital Readout Tailstock Tool Post 12" 6 Jaw Chuck Work Light Swing Down Chuck Cover Carriage Stop Thread Dial Indicator Foot Break Coolant System with Removable Chip Pans & Pump Hardened & Gr...

Timemaster 24″ x 80″ Gap Bed Lathe

• used

Timemaster N2416 x 80 Gap Bed Lathe Swing- 24″ Swing in Gap- Centers- 80″ Spindle- D1-8 Spindle Hole- 3″ Tailstock Taper- MT#5 Better Pictures and Video Coming Soon

Hardinge HLV-H Precision Toolroom Lathe IN/MM with DRO

• used

• Manufacturer: Hardinge
• Model: HLV-H

Hardinge HLV-H Precision Toolroom Lathe IN/MM with DRO Serial#

Nardini Mascote 14″ x 40″ Geared Head Lathe

• used

• Manufacturer: Nardini

Model- MS 1440 Serial# E6 KEL741 New- 02/2005 Swing Over Ways- 14″ Swing in Gap- Distance Between Centers- 40″ Spindle Hole- Spindle- D1-5 Camlock Tailstock Taper- MT#3 Wired- 220v 3ph Equipped with: -Bison 8″ 3 ...

Clausing Colchester 15″ x 50″ Lathe with Taper in/mm

• used

• Manufacturer: Clausing

Hardinge HLV-H Precision Toolroom Lathe IN/MM with DRO

• used

• Manufacturer: Hardinge
• Model: HLV-H

Hardinge HLV-H Precision Toolroom Lathe IN/MM with DRO Serial# 15276-T New 1997

Hardinge HLV-H Precision Toolroom Lathe IN/MM with DRO

• used

• Manufacturer: Hardinge
• Model: HLV-H

Hardinge HLV-H Precision Toolroom Lathe IN/MM Serial# 14378-T New Early 1990’s

Meuser 30″ x 96″ Hollow Spindle Lathe 6.320″ Bore

• used

• Manufacturer: Meuser

Meuser Model M4L-160 Hollow Spindle Lathe Serial# 47138 New – 1998 Swing Over Ways- 30 1/2″ Swing over Cross-Slide- Distance Between Centers- 96″ Spindle- D1-11 Spindle Hole- 6.320″ Threading- IN/MM Electrical- 5...

Hardinge TFB 11″ x 18″ Precision Toolroom Lathe

• used

• Manufacturer: Hardinge